1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Motor DLE 200cc Premium Muffler
2 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Silent-blocks DLE 170M
4 x 19.5x13 Falcon electric 3-Blade carbon prop (54 g)
2 x 21x14 Falcon electric carbon prop (64 g)
2 x 20,5x14,5 Falcon electric V2 (40 g)
2 x 20x13 Falcon electric carbon prop (64g)
1 x Xplorer3 anemometro
1 x Hovercraft sailcloth
1 x Xplorer2 anemometro
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x 
1 x Xplorer4 anemometro
2 x EVP Unit for AXI2208/xx and 2212/xx
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x VPP system propeller for AXI VPP motors (spare)
1 x Aluminum Bayonet / strongal D25 mm / 1 m
2 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x 2 mm Prop Adapter M6
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Stickers-digit for marking
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Circlik for shaft 2.3 mm (10 pcs)
1 x BALSA trip 10x10x1000 mm
2 x 20x15 Falcon electric V2
1 x DLA 116 crankshaft
1 x Propadapter for motor A50
1 x Extension Arm for Carburetor
1 x SAITO FG-36 carburetor
1 x Suction funnel for carburetor 90D-L (red)
2 x Propeller 12x6 Falcon electric
1 x Suction funnel for carburetor 90D-M (red)
1 x Stainless Steel Bend D 12x0,4mm
1 x KS86 V muffler up to 65cc
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x Stainless Steel Bend D 25x0,5mm
1 x L ELBOW 90º ø 25 mm
1 x Paramotor BackPack XXS (without accessories)
2 x Pulley brass 2,5/1 (2 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Pulley brass 5/1,5 (2 pcs)
1 x wire tensioner (silver)
2 x Pulley brass 4/1,5 (2 pcs)
1 x Cable coupler M2x66 (2 uds)
1 x wire tensioner (red)
1 x Para-RC Trike "RC-Bullix"
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x Propeller FALCON 5-BL 24x23.5
3 x FALCON 26X10 CARBON PROPELLER (GAS)
1 x FALCON 28X11 CARBON PROPELLER (GAS)
1 x FALCON 24X12 CARBON PROPELLER (GAS)
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x FALCON 24X9 CARBON PROPELLER (GAS)
2 x FALCON 27X11 CARBON PROPELLER (GAS)
1 x Aluminium servo arm (2 uds)
1 x BULL MØ1 2.600mm BLUE
1 x Battery FUTABA 18MZ
1 x Switch Cap L (silver)
1 x Switch Cap L (Blue)
2 x Servo arms set 40/50/55/5055 MG
1 x Charger FUTABA SQN30W12P-08 220v
1 x Maleta transporte FUTABA 10PX
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Teacher-student connector T12FG/FX-30
2 x Metal gear set for HS81MG/5082MG
1 x Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Decorative caps, multicoloured, short
1 x Tray for FUTABA 14SG/16SZ
1 x Pulley brass 6/1,5 (2 pcs)
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left
1 x Metal clevis M3 (10 uds)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Backmountset complete A40
1 x Motor B40-10 L
1 x MEGA AC 16/10/03 Race + PG 5:1 F5J motor brushless
1 x Motor Mega AC 22/30/02
1 x Motor Mega AC 16/30/01
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Aluminium wide washer M3 gold (4 pcs)
1 x Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Secraft Fuel system v2, red color
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x BULL MØ1 2.600mm RED
1 x Spare Shaft Ø6mm L:450mm M5
1 x Cap Hispano Aviación
1 x Set transmisions ULTIMATUM 2.0 (dura/aluminium)
1 x 261 mm M4/M4 6.0x4.0 mm shaft ship
1 x ULTIMATUM 2.0 PRO "McLAren"
1 x Switch Cap M (blue)
1 x Decorative caps, multicoloured
1 x Switch Cap M (silver)
2 x MIG 29 3D RTF, Servo
1 x Futaba Aero Large Case - Internal Foam
1 x Transmitter Balancer Futaba V
1 x Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Futaba Neckstrap
2 x Horns set HS-65HB/MG, 5065MG
1 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x Metal gear set for HS85MG/5085MG
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Switch moment button, 2 functions, long FUTABA
1 x TX-Tray V1 (L) (Red)
1 x Switch Cap M (red)
1 x Transmitter Balancer SPK DX-8
1 x Switch Cap L (black)
1 x Servo arms set HS-65HB/MG/5065MG
1 x Switch Cap M (black)
1 x Servos wing assembly set HS 80/81/82/85
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Metal ball clevis M3 (10 uds)
1 x Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs)
1 x Pulley brass 16/2 (2 pcs)
1 x Pull-Pull complet set with CF rudder double servo arm
1 x M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x Metal clevis M2 (10 uds)
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Micro clevis (10 uds)
1 x Pulley brass 14/2 (2 pcs)
1 x Metal clevis M2,5 (10 uds)
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x Pin to cable coupler M1,6 ⌀ (6 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Pulley brass 12/2 (2 pcs)
1 x Red aluminium servo arm V1-Futaba 20 mm M2
1 x Motor A50-12 L Glider
1 x Axle for motor A50-L
1 x Motor A30-14 M V2 6 Poles
1 x Motor A30-12 L V4
1 x Motor A200-8
1 x Motor A50-10L Turnado V3 Glider
1 x Motor A50-14L Turnado V3 Glider
1 x Shaft for A60-20/22/24S (120 mm)
1 x Shaft for A60-L (140mm)
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Motor Mega AC 16/15/05 CE F5J
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x FALCON 24X10 CARBON PROPELLER (GAS)
1 x Motor Mega AC 16/25/02
1 x Motor Mega AC 16/07/12
1 x Motor Mega AC 16/07/04
1 x Motor Mega AC 22/45/03 E
1 x FALCON 28X10 CARBON PROPELLER (GAS)
27,437.40EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies