2.50EUR

1 m servo "Premium" wire (white/red/blue)
[POWER1009/1]


Product description:
Premium servo cable is manufactured specially for PowerBox Systems. The cable is extremely flexible, and is made up using very thin individual strands in order to pass the maximum current through the given cross-sectional area of 0.35mm². The insulation is made of a special material which is also employed in full-size aviation. It is virtually indestructible, and offers excellent protection even when reduced to just a thin film around the copper conductor.

This insulation produces a weight reduction of about 30% compared with the conventional PVC. For comparison: in spite of its larger cross-section, the 0.35 mm² Premium cable offered here is lighter than standard 0.25 mm² PVC cable. The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.

PowerBox Premium cable is available loose in 5.0 m or 10.0 m bundles. If you need different lengths, please contact us for a quote.

Features:
- 0.35 mm² cross section
- 30% weight saving
- Only 11g/m
- Fire resistant
- Robust isolation
- Employed in full-size aviation



temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
Stainless steel cable Ø 0.88 mm - 60 kp (10 m)

temporarily out of stock
temporarily out of stock

Crimping sleeves for 1.1 mm cable (10 pcs)
Crimping sleeves for 1.1 mm cable (10 pcs)

temporarily out of stock
temporarily out of stock

Servoarm Aluminium SH-82
Servoarm Aluminium SH-82

temporarily out of stock
temporarily out of stock

Servoarm SH-81, two sides, aluminium
Servoarm SH-81, two sides, aluminium

temporarily out of stock
temporarily out of stock

Esc MasterSPIN 99 Pro OPTO
Esc MasterSPIN 99 Pro OPTO

temporarily out of stock
temporarily out of stock

ProgBOX MASTER Hacker
ProgBOX MASTER Hacker

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Ferrita 17x10x6.5 mm
2 x Ferrita 14x8x5.5 mm
1 x 1/10 Pilot "Jack"
1 x Pilot "Goose" (Slimline)
1 x Piloto JET 1:3,5
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Piloto Jet "Green" 1/6 Scale
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x 1/6 Pilot "Garry"
1 x 1/12 Pilot "Cougar"
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Adaptadores carga 6s JST-XH
1 x Pilot "Duke" Legends Series (Slimline)
2 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x 1/6 Pilot "Cindy"
1 x Piloto jet 130 mm
1 x 800TVL CMOS camera for FPV
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Conector MR-60 (pareja)
1 x Turbina KINGTECH K320 G5
1 x Pilot "Dick" Legends Series (Slimline)
1 x Pilot "Anthony" (Slimline)
1 x 1/4 Pilot "Mike"
2 x 1/10 Pilot "Jimmy"
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x 1/12 Pilot "Tom"
1 x 1/6 Pilot "Tony"
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x 1/12 Pilot "Langley"
1 x USB Mini Camera endoscope
1 x Extension MPX-MPX 20 cm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 
1 x SE Ring 240 mm (2 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x Ring 320 mm length (5 pcs)
2 x DYNAMOMETER S-1580
1 x Optical RPM Sensor
1 x Angle of incidence meter
1 x Angle measurer
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Oracover Green10 m
1 x Long ball link M3 (6 uds)
1 x Green smoke canister 140 g
1 x Glases Nimbus
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Prop Holder AXI 41xx V2
1 x Propeller POWER-PROP 13x9
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x Motor holder for AC 28/7
1 x TMM 1210-3S heli
1 x Starter EM Gear Power 80
1 x 
1 x Cooler motor type 300
1 x TMM 2512-3S heli
1 x 1/12 Pilot "Fighter"
1 x 
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Cable control set
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Transmitter Balancer Futaba T-10CG
1 x Switch Cap M (black)
1 x Receiver bed (Blue)
1 x ABS tube 4.0x3.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x Threaded coupler M2 (10 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x Horn 6/35 with M3 Bearing
1 x Turbina JetsMunt VT98 NG
1 x Telemetry adapter JestMunt
1 x ECU BL180 Jets Munt
1 x Turbina JetsMunt M122 NG
1 x Turbina JetsMunt M166TS
1 x Turbina JetsMunt M210TS
1 x FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M
1 x Tank GFK Opus/JEt 300 ml
1 x BD-5 Pro ARF
1 x HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x Car Charger DC/DS-16
1 x DYMOND VTX UBS Programming adapter
1 x Teacher / Student Cable
1 x Neck strap JETI DS
1 x DUPLEX 2.4EX Central Box 320
1 x DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x DUPLEX 2.4 EX MBar
1 x DUPLEX 2.4EX MT 300 EX
1 x Winter-Glove DS tx
1 x ABS tube 6.0x5.0x1000 mm
1 x Spinner propeller pleg. 40 mm / 3,2 mm
1 x DSM 10 Dual Switch Mixer
1 x Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x Spinner propeller pleg. 40 mm / 4,0 mm
1 x Spinner Alumin. propeller pleg. 40 mm / 3,0 mm
1 x Spinner propeller pleg. 30mm axle 3,0 mm
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x 24x10 prop Super Silence
1 x Monokote BLUE metalizado (1.8x0.65m)
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Smoke set "M"
1 x "M" set
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x White smoke bombs AX-9 (10 pcs)
1 x Smoke set "Glider"
1 x Yellow smoke canister 140 g
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x Transmitter Stick Ends V1 Red - M3 (2 pcs)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Transmitter Balancer HITEC Aurora 9, JR and Spectrum (blue)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Transmitter Stick Ends V5 Rojo - M3 Futaba/Hitec/Spektrum DX8 (2
1 x Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Transmitter Stick Ends V5 Blue - M4 JR/DX7
1 x Switch Cap M (silver)
26,958.89EUR
Manufacturers
Languages
Español English
Currencies