109.00EUR

GRE-18 RTR Crawler 1:18 Orange
[KAV06GRE180O]


Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x 3.17 mm Prop Adapter CN-Spinner
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x 5 mm Prop Adapter M6
2 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Canopy Latch
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x Cable grommet Ø 5 mm (4 uds)
1 x FIALA Propeller 19x12 Electric
1 x Double conector with JR adapter and 200 mm extension
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Truck-trailer for gliders 720 x 285 mm
1 x Aero-Master Cabine (Aero-naut)
1 x 2 mm male connector (2 pcs) with safety connector
1 x APM2.6 Power module with 5.3V DC BEC
1 x Vasa model Catapult
1 x Clip mini fixing for wing (2 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x XH male balance (2S) connector (2 pcs)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Wing connector 8pin with pin strip, plug & socket
1 x SCHARNHORST accessories
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Profile ABS half cane 7.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS Strip 1.5x6.0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Strip 1,5x1,5x330 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x 2,0x50 mm allen screwdriver
1 x Aluminium sheet 500x250x0,5mm
1 x 9x4.7 * 22x12 carbon propeller
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x ABS tube 3.0x2.0x330 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Cut tube
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Balsa panel 6.0x100x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Beech dowels 10 mm x 1000 mm
1 x Crimping tool
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Cable set PREMIUM, fuselage/wing
1 x Strip ABS 2.0x8.0x1000 mm
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x ABS tube 8.0x7.0x1000 mm
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x ABS tube 16.0x14.0x1000 mm
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x Strip 3,5x1,75x330 mm
1 x Round Rod 2,5x1000 mm
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Fiberglass heat shield Ø 8 mm 1000 mm
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x Balsa panel 2.0x100x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Cable with accesories
1 x Small aluminium horn blue (2pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Stickers-digit for marking
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Propeller MEJZLIK 20x13 Electric light (41 g)
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x Propeller MEJZLIK 21x10 Electric light (36 g)
1 x Adapter lead MPX/EC3
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Aero-Master Fuselage (Aero-naut)
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Cable grommet 9.5 mm (4 uds)
1 x Adjustable launching hook
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Angle measurer
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x Carbon fiber rod 2.0 mmx1000 mm
2 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x CC 03
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x ABS 500 x 400 x 1 mm (white)
1 x Round Rod 2,0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x ABS Strip 1.5x2.0x1000 mm
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x 10 mm Quick clamp_L (6 pcs)
1 x Glases Nimbus
1 x 
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x BALSA triangular 6x6x1000 mm
1 x Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x Protective open Cover for wires Ø 13 mm 1000 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x ABS tube 8.0x6.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Horn 20x28,5 mm (2 pcs)
1 x Cable control set
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
2 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 6/27 with M3 Bearing
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn with ball 55x40
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Horn 6/35 with M3 Bearing
1 x Tube Pitot to PIXHAWK
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x PPM Encoder Module
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x 12 mm floating pad (49 pcs)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Blind nut M2 (10 pcs)
1 x Blind nut M6 (4 pcs)
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x 4 mm Prop Adapter M8
1 x WingFix ULTRA Black Edition
1 x Buy Perforated film 100 cm / 10 m
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x XH female balance (4S) connector (2 pcs)
1 x Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Blind nut M4 (4 pcs)
1 x resin-hardener L-385 H-385 (625 g)
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x Connectors banna oro 4 mm (M/F)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Carbon fiber rod 16 mm x 1000 mm
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x La Capitania di Venetia accesories
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Angle of incidence meter
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x resin-hardener package L-385 with hardener H-385
2 x 
1 x Support pumb/filter Xicoy X45
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x 100 mm rods set for direction control
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x XH male balance (3S) connector (2 pcs)
2 x Buy Perforated film 145 cm / 50 m
1 x resin-hardener L-385 H-385 (1250 g)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x XH female balance (3S) connector (2 pcs)
1 x Conector BEC male (10 pcs)
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x 4 mm Prop Adapter CN-Spinner
1 x Gold antispark 5,5 mm plug
1 x Hardener Aero EPH 161 (250 g)
1 x CM-3
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Recessed MPX connector support (6 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x Bungee HLG Premium
1 x Allen wheel collar M4x4
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x PT 20x13 EL Propeller
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Towing hook
1 x Connector CAN 15
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x 140 mm rods set for direction control
1 x Prop Shaft Adapter 5 mm "long"
1 x Fixed launching hook
1 x Allen wheel collar M4x6
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x Field folding model stand
1 x Clip fixing for wing (2 pcs)
2 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Support conector MPX (6 pcs)
1 x Stick coupler Ms 15 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Buy Perforated film 100 cm / 20 m
1 x 10 mm floating pad (72 pcs)
1 x Support pump Xicoy X45
1 x PT 21x13 EL Propeller
1 x Hardener Aero EPH 161 (500 g)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Xoar Electric Beechwood Prop 24x8
1 x Aluminium wide washer M3 red (4 pcs)
2 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Balsa panel 5.0x100x1000 mm
1 x ABS tube 5.0x4.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Ferrita 27x14x7 mm
1 x Glases Stratus
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Ferrita con funda
1 x Green silicone 0,25 qmm wire (50 m)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Round Rod 4,0x1000 mm
1 x Glases Innovation Plus
1 x ABS tube 3.0x1.0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x 100g Flux Paste for Silver Solder
1 x Cable set PREMIUM , fuselage/wing one4one
1 x Extinguisher CO2 - 2 Kg
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x 6 mm Quick clamp_S (10 pcs)
1 x Dremel 3000 130W
1 x 2,5x60 mm allen screwdriver
1 x Balsa panel 1.5x100x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Epoxy QUIK-CURE™ 5 min (260g)
1 x Fresa corte diamante Ø 2.3mm (bola)
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Profile ABS half cane 5.0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Ferrita 17x10x6.5 mm
1 x ARAMID honeycomb 1300x2600x2 mm
1 x 200m servo "Premium" wire (white/red/blue)
1 x 10m servo "Premium" wire (white/red/blue)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Copier 5x20 cm pcs
1 x Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x BALSA trip 3.0x5.0x1000 mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Boxed KIT OF 7 Rotary Burrs FINE
1 x ABS 500 x 400 x 2,0 mm (white)
1 x ABS tube 4.0x3.0x1000 mm
1 x Cotton Flocks, bag/ 500 g
1 x Protective Cover for wires Ø 15 mm 1000 mm
1 x 
1 x Round Rod 1,0x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Strip ABS 2.0x3.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Profile ABS Square 2 x 1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x ABS 500 x 400 x 0,5 mm (white)
1 x 100m servo "Premium" wire (white/red/blue)
1 x BALSA trip 2.0x2.0x1000 mm
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Cable set Premium™ MAXI "one4two"
1 x BALSA trip 6.0x6.0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x JR silicone servo wire 0,35 qmm / 5m
1 x Fresa corte diamante Ø 2.35mm (lentil)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Dean-T Plug Mold
1 x Blue silicone 0,5 qmm wire (50 m)
1 x Epoxy MID-CURE™ 15 min (130g)
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x 25 mm Sandpaper file
1 x ABS tube 7.0x5.0x1000 mm
1 x Balsa panel 10x100x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Jeti Black cap
1 x ABS Strip 1.5x3.0x1000 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x Ferrita 14x8x5.5 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x 50m servo "Premium" wire (white/red/blue)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x BALSA trip 2.0x10.0x1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x ABS tube 9.0x8.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x EC-Cutter
1 x Crimping tool
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x Cross Connector 4.0 mm x 1000 mm
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x Balsa panel 2.5x100x1000 mm
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Glases Nimbus "Black"
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x ABS tube 14.0x10.0x1000 mm
1 x Profile ABS half cane 4x1000 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Cotton Flocks, bag/ 7 Kg
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Glass Bubbles (0,12 g) 350 ml
1 x 3,0x60 mm allen screwdriver
1 x ABS tube 5.0x4.0x156 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Epoxy 5min KAVAN 2x 100g
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Balsa panel 3.0x100x1000 mm
12,672.38EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies