Top » Catalog » Hardware » Chargers » Chargers » Gens Ace - Tattu » GENSTA1200C

900.02EUR

TA1200 Charger Compatible with Smart and Standard LiPo Batteries
[GENSTA1200C]

TA1200 Charger Compatible with Smart and Standard LiPo Batteries

INSTRUCTION
This charger is capable of charging 2 sets of lithium batteries simultaneously. The maximum power output is 1200 watts per channel. User can select between Charging mode and Maintenance mode. Charging current is adjustable between 10A, 20A and 30A. It also has over-current, over charging, over temperature, safety cut off, fast equilibrium and status indicator functions. With the charging manager TA1200 and the chargers UB-MG-Fast/UB5 combined, single charging manager can connect up to 5 sets of batteries simultaneously and charges alternately for the 5 sets of batteries on basis of charging saturation from high to low. If the charger TA1200 connects with 2 charging managers UB5/UB -MG-FAST, It can charge 10 sets of battery simultaneously. With double LCD display equipped, the charger automatically indicates real time charging status, charging voltage, charging current, charging time, battery capacity and cell voltage.There have two lipo batteries we recommend. Tattu Plus 1.0 16000mAh 15C 12S1P and 22000mAh 25C 12S1P

SPECIFICATIONS
- Input: 100-240V 18A 50/60Hz
- Output: Max50.4V Max.25.0A
- Max Output Power: 100-120V Max Output Power 750W×2CH /180-240V Max Output Power 1200W×2CH
- Type of Battery: LiPo/LiHV/Smart Battery
- Cell Count: 12S
- Channel Count: Dual Channel(10 Channels with 2 charging managers)
- Balance Tolerance: ±20mV
- Input Protection: Over Current Protection
- Output Protection: Over Voltage/Under Voltage/Short Circuit/ Over Temperature/Reverse Polarity
- Working Environment Temperature: 0℃-40℃/32℉~104℉.
- Cooling System: Cooling Air
- External Upgrade Port: Micro USB
- Dimensions: ≈325×190×280.5mm
- Weight: ≈9.2kg

OPERATION
The TA1200 charging manager is a dual channel charger with independent outputs. Each channel operates independently.When the charger is used incorrectly or there is a failure, the charger will display an error message.
1. Startup and Self Test
Be sure all cable connections are correct. Power the unit on. The LCD display, Led Indicator lights should come on. When the charger completes, it’s self test the buzzer will sound.

2. Operation Modes
Charging Mode: Charging Mode will balance charge the battery quickly. Maintenance Mode: When a battery has been on the shelf for a long period of time, it is recommended to use maintenance mode. If the battery life declines or the battery is out of balance greater than 50mV, Maintenance Mode will charge or discharge the battery using a small current to put the battery into proper storage voltage.

3. Setting Working Current
Use the current switch to complete the current setting based on battery capacity.

4. Charging
Long press the charge button for more than 2 seconds to begin charging immediately, or charge will start automatically after 10 seconds after connections are made.

1. Red Light On: the charger is charging the battery and the LCD display indicates real time charging status.
2. Green Light On: Charging is complete.

Note: When using Continuous Working Mode, the charger automatically runs a series of operations. These automatic operations include starting, stopping, testing and switching. When using Continuous Working Mode, the charger will resume charging automatically if the battery is not removed within 30 seconds of pressing the stop button.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
    Chargers->
      Gens Ace - Tattu
      Graupner
      Hitec
      iCharger
      Multiplex
      Orbit
      Others
      PowerBox
      Revolectrix
    Balacers
    Power supplies
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	1/10 Pilot "Jimmy"
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	1/10 Pilot "Jack"
1 x	1/6 Pilot "John"
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	1/4 Pilot "Heidi"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/12 Pilot "Tom"
1 x	Pilot "Goose" (Slimline)
1 x	Pilot "Anthony" (Slimline)
1 x	1/12 Pilot "Fighter"
1 x	1/7 Pilot "Japanese"
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	1/6 Pilot "Garry"
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/12 Pilot "Langley"
1 x	1/12 Pilot "Cougar"
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/6 Pilot "Buddy"
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	MPX-Dean "T" Adapter
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	3 LiPo XH>EH adapter
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	5 LiPo XH>EH adapter
1 x	Adapter lead MPX/EC3
1 x	CM-3
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	30 cm BEC cable (male)
1 x	CC 02
1 x	BEC 3A FOXY
1 x	JETImodel SINGLE BEC
1 x	Cabel charger transmitter GRAUPNER
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 03
1 x	Circlick securite
1 x	CC 01
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	TrainerCord (master-learner)
1 x	2 LiPo XH>EH adapter
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	30 cm BEC cable (female)
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabel "Y" 15 cm
1 x	Extension silicon 10 cm (Futaba)
2 x	Extension silicon 10 cm (Graupner)
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Extension silicon 30 cm male (Graupner)
1 x	200 mm extensión servo HITEC/JR
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x	Prolongador S-Bus JR/JR 20cm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Premium servo extension 25cm
1 x	Extension 90 cm (Futaba)
1 x	Extension silicon 30 cm female (Graupner)
2 x	Extension silicon 30 cm female (Futaba)
1 x	Extension 100 cm (Futaba)
1 x	Futaba male 40 cm extension
1 x	Extension 7.5 cm
2 x	Tape GFK 25 mm
2 x	SE Ring 240 mm (2 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	Tape GFK 38 mm
2 x	Ring 320 mm length (5 pcs)
4 x	SE Ring 200 mm (2 pcs)
2 x	SE Ring 250 mm (2 pcs)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
3 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
3 x	Tape GFK 50 mm
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
3 x	Small aluminium horn blue (2pcs)
2 x	Horn with ball 55x40
2 x	Brass control horn M3 short for wire (2 pcs)
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Horn 6/20 with M3 Bearing
3 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Horn 5/20 with M2 Bearing
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
3 x	Small aluminium horn gold (2pcs)
1 x	Ply-Span 450x600/13g Orange
1 x	Oracover Verde 2 m
2 x	MYLAR film A350 (1000x500 mm)
2 x	Oracover Green10 m
2 x	Oracover Red 2 m
1 x	Oracover Brown 2 m
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Black 2 m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oratex Natural White 20m
1 x	ORACOVER Fluor red (2 m)
1 x	BALSA triangular 10x10x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
2 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
3 x	Xplorer4 anemometro
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	Pine wood slat 2.0x10.0x1000 mm
2 x	BALSA leading edge 8x10x1000 mm
2 x	Xplorer1 anemometro
1 x	Beech dowels 4.0 x 1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Civilian pilot "Curt" size 9cm (Slimline)
2 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension silicon 35 cm male (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension 30 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	20x200 mm battery rings
4 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	Marker ties (20 pcs)
2 x	SE Ring 400 mm (2 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
3 x	SE Ring 300 mm (2 pcs)
2 x	Spikes Band (5 m)
3 x	SE Ring 350 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
2 x	Foil for sticking flaps and ailerons
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Cable control set
1 x	Horn for flap control (1 pcs)
2 x	Liston HAYA 3 x 10 x 1000 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Circlick securite
2 x	Horn DUBRO 1/2A
1 x	6 mm blue aluminium threaded horn with patella
2 x	Brass control horn M2 large for wire (2pcs)
2 x	20x1000 mm Ring Strap Back To Back
1 x	Premium servo extension 75cm
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Gyro 3-Ejes REFLEX V2 FMS
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	BALSA triangular 6x6x1000 mm
1 x	Oracover Yellow CADMIO 10 m
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Oracover ROYAL RED 2m
1 x	Oracover CARBON Metalic 1 m
1 x	L-Connector 1.0 mm x 1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	100g Flux Paste for Silver Solder
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Copier 5x20 cm pcs
1 x	EC-Cutter
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	2,5x60 mm allen screwdriver
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Oracover Yellow CUB 2 m
2 x	Oratex Yellow Cub 10 m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Yellow CADMIO 2 m
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	GPS Expander Module
1 x	Oratex White 2m
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	3,9 mm ZG20-ZG38 servo arm
1 x	Covered closure or fairings
1 x	Carburetor for ZG45SL and ZG62/S/SL
1 x	Reed valve for DA 50-R
1 x	Spring Clip Ø25 mm
1 x	Miniature brass strap hinge, 1 m
1 x	DA 85 / DA 100 / DA 100 L carburetor
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Prop washer for ZG45SL, ZG62/S/SL and ZG74B/ZG80B
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Horn mando long (2 pcs)
1 x	Control horn long w/ball
2 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	SE Ring 450 mm (2 pcs)
1 x
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 480 mm (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Extension silicon 25 cm (Graupner)
1 x	Profile ABS half cane 4x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Cyanocrylate MD GA460 odourless 20g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	SIG Coverall 1.2x0.9 m
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	GPS Sensor + Logger OPTronics
1 x	SIG Coverall 1.2x1.8 m
1 x	SIG Coverall 1.2x4.5 m
1 x	12.7 mm 2:1 black termoretract tube
1 x	Balsa panel 3.0x100x1000 mm
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Birch plywood plate 600x300x2.0 mm
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	SlowFlyer control horn (3 pcs)
1 x	Small aluminium horn red (2pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Horn with ball 40x30
1 x	Long adjustable control horn 3x34
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Micro control horn (2 pcs)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Short adjustable control horn 3x24
1 x	RH long aluminium horn (2pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Micro control horn T2 Ø 1
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Small control horn with bearing (2 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	140 mm rods + T patellas set for direction control
1 x	6 mm red aluminium threaded horn with patella
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	90 mm rods + T patellas set for direction control
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	45 mm rods + T patellas set for direction control
1 x	Horns indoor
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Rescue 1,8m2 / BackPack
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Digital scale up to 40 kg
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x	Tube support Ø 6mm (10 pcs)
1 x	Ply-Span 450x600/13g Black
1 x	PVC blue transparent battery termo-retract 95 mm (1 m)
1 x	6,4x1000 mm 2:1 black termoretract tube
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	Birch plywood plate 600x300x4.0 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	DUPLEX R6 EX receiver 2,4GHz
1 x	DUPLEX USB Adapter
1 x	Receiver DUPLEX R5L EX 2.4 GHz

6,964.51EUR