25.00EUR

Lipo KAVAN 2200 mAh 11.1v 30/60C
[KAV33.7126]


Lipo KAVAN 2200 mAh 11.1v 30/60C
KAVAN 30/60C lithium polymer packs are great for Sunday flyers, all-around and sport models; they feature 30C max. discharge rate, charge rate 1-2C, wide capacity range (350-3250 mAh) and long lifespan at truly affordable price.
KAVAN 30/60C packs present a perfect power supply for all-around sport, semi-scale and aerobatic models (both pattern and 3D), scale boats etc. that will make happy Sunday flyers or skippers. The comparatively high discharge rate allows unleashing the full power of your power unit, quite aggressive flight style and all sorts of fun.
Do not use a charge rate higher than 2 C, the recommended charge rate is 1-2 C. We recommend using a balancer during every charge. KAVAN 30/60C LiPo batteries do not require any initial forming; however, if you intend to use 2C charge rate, the initial three charging cycles should be performed at a rate not higher than 1C. There is no need to discharge the LiPo batteries before the charging - you can charge partly discharged packs.
The batteries are supplied as "Air Packs“ optimized for model planes and helicopters. The packs feature heavy duty silicone power (charging) cables without connectors and balance cables with JST-XH connectors that could be connected directly to the balance sockets of the most of KAVAN, Raytronic, SkyRC, GT Power etc. chargers. The package contents: KAVAN 30/60C battery pack, instruction manual.
Capacity [mAh]: 2200 ; Voltage [V]: 11.1 ; Charging current [A]: 2.2 - 4.4 ; Max. Charging current [A]: 4.4 ; discharging current [A]: 66 ; Max. discharging current [A]: 132 ; Energie [Wh]: 24.4 ; Lenght [mm]: 107 ; Width [mm]: 35 ; Height [mm]: 22 ; Weight [g]: 164


temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
    A123 LiFe Batteries
    Accesories
    AIRSOFT Battery
    Lead batteries
    LiIo Batteries
    LiPo Batteries->
      E-Flite
      Gens Ace
      KAVAN
      RAY/FOXY
      ROBBE
      ROI IMPORT
      SPEKTRUM
      TopFuel
    NiMH/NiCd Batteries
    Battery Testers
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x APM2.6 Power module with 5.3V DC BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Double conector with JR adapter and 200 mm extension
1 x BEC 3A FOXY
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x UBEC 6A KAVAN
2 x Connector Sub-D 2+5 Female
3 x 30 cm BEC cable (female)
1 x Dean "T" - Futaba Adapter
3 x Connector Sub-D 2+5 Male
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x Cabling for Fox MDM1 wings
1 x CC 02
2 x CC 03
1 x CC 05
2 x CM-3
1 x Connector CAN 15
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Circlick securite
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x 4 LiPo XH>EH adapter
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Cabel charger transmitter GRAUPNER
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x 30 cm BEC cable (male)
1 x 2 LiPo XH>EH adapter
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Stickers-digit for marking
1 x FX three-position switched channel, long
1 x Micro Switch button
2 x Three-position switched channel, short
1 x Female connector JST SH 1.0mm with 10 cm wire
2 x wing/fuselage connector for 12 pines AWG 20-24
1 x EWC3 40 cm wing connector
1 x Female connector for 12 pines AWG
1 x EWC6 40 cm wing connector
1 x Hacker X-Pro USB interface V2
1 x Female connector for 20 pines AWG
1 x SPARK Switch 12v
2 x JETImodel Addcap 1640
1 x Male connector for 10 pines AWG
1 x EWC3 100 cm wing connector
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Horn 5/15 with M2 Bearing
2 x Horn 5/20 with M2 Bearing
2 x Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x LH long black aluminium horn L31xH30 (2pcs)
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Cable control set
1 x Horn 13,5x16 mm (2 pcs)
2 x Brass control horn M4 short for wire (10pcs)
2 x Motor DLE 200cc Std
1 x Extension 6 lipos XH > EH
1 x Opto Gas Engine Kill Switch
1 x Extension 5 lipos JST/C
2 x Electronic switch JETI SP06 Opto
1 x PowerBox SparkSwitch RS
1 x SPS 70V 140/280 A
1 x Magnetic Interruptor MULTIPLEX
1 x SWTU2 switch
2 x Electronic switch JETI SP6 0-15v/6A
1 x Extension 2/3 lipos JST - JST/C
2 x SBEC Jeti
1 x MAX BEC
1 x Servo slow down unit (0,7-14,7 sec )
1 x Opto Gas Engine Kill Switch
1 x SBEC 40
1 x PSC 5
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Silent-blocks DLE 170M
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x MAX BEC 2
1 x Male/Female prolonguer for Balancer Thunder Power 6S
2 x PSC 6
1 x SPS 70V 100/200 A
1 x Male Prolonger TP 4/5S
3 x Small Crow DLE-170M
1 x Extension 5 lipos JST - JST/C
2 x Silicone red 0,25 mm² wire (25 m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Circlick securite
1 x Smoke set "Glider"
2 x 2 mm male connector (2 pcs) with safety connector
1 x Cable silicona female batt. receptor 30 cm (Futaba)
2 x DPS Switch JR/JR
1 x ABS tube 12.0x10.0x1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x Actuador lineal HLS12-100210-7.4v
1 x Motor DLE 430 cc - Paramotors
1 x DPSI magnetic switch actuator (housing)
1 x SBEC 30 D
1 x Horn mando small (2 pcs)
1 x Small aluminium horn red (2pcs)
1 x Extra long horn 60x30
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Rudder forward 80x28 "type Kato"
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Horn with ball 40x30
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x 1,5x50 mm allen screwdriver
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x 3,0x60 mm allen screwdriver
1 x 5 mm M2 variable inclined horn
1 x Horn 6/20 with M3 Bearing
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Flybar support metal LAMA
1 x Horn 6/27 with M3 Bearing
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Brass control horn M4 short for wire (4 pcs)
2 x Shaft sleeve LAMA
1 x TMM 1210-3S heli
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Short Switch On/Off micro
1 x TMM 2512-3S heli
1 x Mini-Pix Esc 15 Amp
1 x PWC4 wing/fuselage connector for 4 servos
1 x Optotronix X-Carrier
1 x GPS Expander Module
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x DPSI LR-S (with push buttons)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x SPS Remote switch actuator
1 x Bidule 170 ARF 3.48 m
1 x Bidule 55 2460 mm Cabina
1 x 21x14 Falcon electric carbon prop (64 g)
1 x Extension 2/3 lipos JST/C
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x Transmitter Balancer Futaba V
1 x Switch Cap L (Blue)
1 x Multi-adapter balancer JST - TP
1 x PC-21 2.880 mm (w/o oracover)
1 x PC-21 XXL Bags
1 x Battery charging cable XT60
1 x X-RAY Micro QR (Tail Tube)
1 x Chili F3K 2 wing servo mounted
1 x Telemetry interface ALTIS 6 cm
1 x Telemetry interface ALTIS 12 cm
1 x RX Battery Eneloop 6,0 V JR 2500 mAh
1 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x XH LiPo extension lead
1 x Electron 22 mm Fitting barb
1 x Micro control horn T2 Ø 1
1 x Rudder forward 70x28 "type Kato"
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Small aluminium horn blue (2pcs)
1 x Long extra-strong control horn with bearing 2,8x34
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x ER40eVo set B (20 Kg)
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x SlowFlyer control horn (3 pcs)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Actuator Electric 25 mm HIGH TORQUE
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x GS-200 Electronic
1 x Electric Landing Gear ODYSSEY (Elektron Retracts)
1 x Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re
1 x XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x Pipa 3D BULL MØ1 2.600mm
1 x 20 g tin paste
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x FPV Station for SE TX-Tray V1
1 x PC-21 XXL 3.395 mm
1 x Prolongador S-Bus JR/JR 10cm
1 x MB339 Saudi PNP
1 x Coversion set HIROBO EX/EAGLE elektro
1 x VIPER SL Thunderbird PNP 2270 mm
1 x Futaba male 40 cm extension
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Switch Cap L (Red)
1 x Decorative caps, multicoloured
1 x VIPER SL Gold PNP 2270 mm
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x X-RAY Micro QR
1 x X-RAY Micro QR (Elevator)
1 x Chili Race F3K 2 wing servo mounted(carbon biax)
1 x X-RAY Micro QR (Fuselage with canopy)
1 x X-RAY Micro QR (Rudder)
1 x Altimeter Altis NAO
1 x Device Terminal
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x Sanyo TX Battery Eneloop 9,6 V Futaba
1 x RX Battery Eneloop 4,8 V JR 2500 mAh
1 x Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
40,728.62EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies