1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Pitts Mufflers EME 70 cc (2 pcs)
3 x Motor EME 60 cc with electric starter
1 x One Way bearing for EME35 starkit with key
1 x Selfstarr EME35
1 x Pitts Mufflers EME 35 cc
1 x Motor EME 70 cc with autostarter
3 x Piston EME 35cc
2 x Propeller hub EME 60cc
3 x CDI EME 55/60 cc
2 x Motor EME 35 cc with electric starter
3 x Motor EME 60 cc
1 x Motor EME 70 cc
2 x One Way bearing for EME55 starkit with key
1 x Cylinder EME 35 cc
2 x Selfstarr DLE55, EME55/60, DLA56, SE 55
1 x 7-Cylinder 35cc 4-Stroke Glow Radial Engine
2 x CDI EME 120cc
2 x Motor EME 35 cc
1 x Moki Exhaust Bend 50VT
1 x Motor MOKI S 350 cc 7 cylinder
1 x Motor NGH GT-17
2 x Pitts Mufflers EME 55/60 cc
1 x EME ignition free wheel
1 x Motor ROTO-85 FS NG 4T 2 cylinder Boxer
1 x Flex-headers for Valach VM 85B2-FS
1 x OS GT15 W/E-4040 for airplane
1 x BALSA trip 3.0x3.0x1000 mm
1 x Micro flex hinge (12 uds)
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Pin hinge 34x16 mm (10 uds)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x BALSA triangular 8x8x1000 mm
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x A/C quality beech plywood 1520x750x3.0 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x BALSA trip 10x10x1000 mm
1 x 800TVL CMOS camera for FPV
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x EasyFLY Addon
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x 18 mm reinforced hinge
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Long pinned hinge (6 uds)
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Pin hinge 26x11 mm (10 uds)
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x 25 mm reinforced hinge
1 x Pick up EME 55/60 cc
1 x Interface Jack Adapter IKARUS
1 x Carbon fiber rod 20 mmx1000 mm
1 x DLA 116 crankshaft
1 x Propeller diller for DA50, DLE55 red
1 x Motor Mount for Multiplex FunJet
2 x Radial heatsink for MPJ AC25/35-xx motor
1 x Frontal support Speed 400/480
1 x Motor DA 100L
1 x Motor DA 50-R
1 x Piñon motor autostarter 35cc
1 x 
1 x Fiberglass motor-holder for electric motors
1 x Propeller 9x7 SlowFlyer
1 x Propeller 8x4,3 SlowFlyer
1 x Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x Filler Gauges
1 x Cables suitable for the motor AC 28/7
1 x Motor holder for AC 28/7
1 x A60 Motor Mount Alu complete set
1 x Propeller 3x2
1 x Propeller 11x4,7 SlowFlyer
1 x Cooler motor type 400
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Wheel 22 mm
1 x 76x23 Ø3.5 mm aluminium core wheel
1 x Wheel FEMA 82 mm / 5 mm
1 x Pin hinge 39x20 mm (10 uds)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x RF9 Flight Simulator with Spektrum Controller
1 x Wheel FEMA 152 mm / 8 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Katana Mini carbon wheel pants (2 pcs)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Tacometer mini ignition RCEXL
1 x Propadapter for motor A50
1 x Propadapter for motor A60-V2
1 x Propeller diller for EME35 and DLE35
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Motor mount for 1200 mm models
1 x Frontal support Speed 280
1 x Fan for A60
1 x Ø 28 mm fiberglass motor-holder for electric motors
1 x 
1 x Motor mount M
1 x Indoor motor holder
1 x Size "M" motor holder for class 400
1 x Motor holder AXI
1 x Size "M" motor holder for class 400
1 x Bearings for motor HACKER C50
1 x Cooler motor type 280
1 x Hacker A30-S Radial Set
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x Blocking screws M6 gas engine
18,487.78EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies