1 x | Motor A2212/13T |
1 x | Shirt Hispano Aviación |
1 x | Vest clothes Hispano Aviación |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 2 mm male connector (2 pcs) with safety connector |
2 x | 55% silver electrodes (2 pcs) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Connector Sub-D 2+5 Male |
1 x | Tape GFK 25 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Marker ties (20 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Adapter lead MPX/EC3 |
1 x | Foil for sticking flaps and ailerons |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Bag connector 2 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | 1/12 Pilot "Fighter" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Field folding model stand |
3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Piloto JET 1:3,5 |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Conector XT-30 (hembra) |
1 x | Rubber profile 10-2 mm 2M |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Profile ABS half cane 5.0x1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Connectors banna oro 3,5 mm (M/F) |
2 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Conector JAPAN G2 Set 5 pares |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Field folding model stand SebArt |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | Ring 320 mm length (5 pcs) |
1 x | 2,0x50 mm allen screwdriver |
1 x | Couple M4 for wire (10 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | 1/10 Pilot "Jack" |
1 x | Aluminium wide washer M4 Black (4 pcs) |
2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
2 x | Flat Connector 4.0 mm x 1000 mm |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Copier 2x20 cm pcs |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
2 x | Spikes Band (5 m) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | 30 cm BEC cable (female) |
1 x | Tape GFK 50 mm |
1 x | DPSI magnetic switch actuator (housing) |
2 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Dust collector for mould cleaning |
1 x | Dremel 3000 130W |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | 12 mm floating pad (49 pcs) |
2 x | Cable coupler M3 (10 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Circlick securite |
1 x | 4 LiPo XH>EH adapter |
1 x | ABS angle 10,0x10,0x1000 mm |
2 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
3 x | Connectors banna oro 4 mm (M/F) |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | 1/6 Pilot "Tony" |
1 x | 2 LiPo XH>EH adapter |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Conector JR Servo female (10 pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | LOGO 600 SX (kit) |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
1 x | Foam wheel Ø 351 mm (2 pcs) |
1 x | Foam wheel Ø 38 mm (2 pcs) |
2 x | Servo BLUE Bird BLS-H71B v2 |
1 x | Servo BMS-4112 |
2 x | Propeller 8x4,3 SlowFlyer |
2 x | Propeller 9x7 SlowFlyer |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Steel brush wheel with 2.35mm |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Starter EM Gear Power 250 |
2 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Mounting frame MPX male connector |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Mounting frame MPX female connector |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Wheel FEMA 112 mm / 6 mm |
1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | 90 mm rods + T patellas set for direction control |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Canopy Latch |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Spring lock washer 3.1 mm (20 pcs) |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Propeller MENZ-S 19x12 |
1 x | Propeller MENZ-S 17x8 |
1 x | Propeller MENZ-S 17x6 |
1 x | Propeller MENZ-S 15x6 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Aero-Master Wings (Aero-naut) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Steering lever |
1 x | LA500 nose |
1 x | Head spacer |
1 x | LA500 Autogyro |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Birch plywood plate 600x300x1.5 mm |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Sensor DUPLEX 2.4EX MUI 200 |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | VTX 477 Carbon Rotorblade |
1 x | Suport PITOT |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | Spinner plastic red fixed propeller 30 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | XH female balance (6S) connector (2 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Socket Head Screw M2,5x12 |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | XT-30 connector (pair) |
1 x | Socket Head Screw M2x10 |
1 x | Extension 5 lipos JST/C - JST |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | FX three-position switched channel, long |
1 x | wire tensioner (silver) |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | Cable coupler M2 (10 uds) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | SE Ring 250 mm (2 pcs) |
1 x | XT-60 connector (male) |
1 x | Window mounting channel 5m |
1 x | |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Male connector for 10 pines AWG |
1 x | Blind nut M3 (4 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | JETImodel DPS 40 |
1 x | Female connector for 12 pines AWG |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
2 x | Connectors MPX male |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Male connector for 20 pines AWG |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Socket Head Screw M2x12 |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Wire easy tensioner (red) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Kwik link unmount tool |
1 x | Screw M2x6 (10 pcs) |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Wheel Ø 90 mm (1 ud) Electron Retracts |
1 x | 3 LiPo XH>EH adapter |
1 x | Connectors DEANS (T) |
1 x | MPX Support (2 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
1 x | 80 mm rods set for direction control |
1 x | Sandpaper file 13 mm |
1 x | Hexagonal Nut M4 (10 pcs) |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Pilot "Anthony" (Slimline) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Propeller MENZ-S 15x6 3 blades |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Lense for Spotlights, 20mm |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Propeller MENZ-S 17x10 |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | SCHARNHORST accessories |
1 x | 5 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | 5 mm Prop Adapter M6 |
1 x | 10 mm Prop Adapter M12 |
1 x | Tirpiz Battleship 1:200 |
1 x | 4 mm Prop Adapter M6 |
1 x | Motor wall |
1 x | Rotor Mast |
1 x | Head core bushing |
1 x | Head lower part |
1 x | Cierva C30 simulated motor |
1 x | Wheel keeper washer |
1 x | Cierva C30 Body Spain |
1 x | SE Ring 240 mm (2 pcs) |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | FALCON 20X9 CARBON PROPELLER (GAS) |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | DUPLEX MUI 50 Sensor |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | |
1 x | DUPLEX 2.4EX MULi 6s M |
1 x | DUPLEX 2.4 EX MBar |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Propeller 8x4 Electric |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | 76 mm light wheels (2 pcs) |
1 x | Servo Robbe FS 128 BB MG HV Digital |
1 x | Cooler motor type 300 |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | 20-25mm Servo Arm |
1 x | 3-blades 30x12 carbon prop Super Silence |
1 x | 3-blades 24x12 carbon prop Super Silence |
2 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | Cooler motor type 400 |
1 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | 60 mm long Prop hub for ZG45SL, ZG62/S/SL and ZG80B |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Propeller APC 14x5.5 MR Electric Pusher |
1 x | 500 ccm gasoline fuel tank |
1 x | 100g Flux Paste for Silver Solder |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 30cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 3-blades 16x10 carbon prop Super Silence |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | 1000 ccm gasoline fuel tank |
1 x | 24x14 prop Super Silence |
2 x | Servo BLS-M55B 61.2kg |
1 x | 30x14 prop Super Silence |
1 x | 27x10 prop Super Silence |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | 3-blades 21x12carbon prop Super Silence |
|
9,888.54EUR |