1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x SIMtransmitter 6 Mode 2
2 x Slave-cable USB Easy Sim
1 x RF9 Flight Simulator with Spektrum Controller
1 x Quicklock washer 1.5 mm (10 pcs)
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x 1 m servo "Premium" wire (white/red/blue)
1 x LightBox SR
1 x Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x Gates hinge 30x16 mm (2 pcs)
1 x Aluminun wheel collar 5 mm Ø (4 uds)
2 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x 30 cm MULTIPLEX female connector
1 x PowerBox Smokepump JETs 2x outside
1 x Gates hinge
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Large flex hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
3 x Aluminun wheel collar 2.5 mm Ø (4 uds)
2 x Katana Mini carbon wheel pants (2 pcs)
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Propeller POWER-PROP 13x9 Izda
1 x Propeller electric carbon 10.5x7
1 x Extension MPX-MPX 20 cm
1 x PowerBox Smokepump
1 x Propeller POWER-PROP 11x6
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Propeller electric carbon 10.5x6
1 x Extension for SensorSwitch 30cm
1 x Propeller electric carbon 10.5x8
1 x MPX-Dean "T" Adapter
1 x Conector JR Servo female (50 pcs)
1 x Propeller electric carbon 9.5x6
1 x Propeller electric carbon 10x7
1 x 5 line servos wire black (1 m)
1 x Propeller 11x4,7 SlowFlyer
1 x Propeller 8x4,3 SlowFlyer
1 x Oracover CHROME 2m
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Hardener Aero EPH 161 (250 g)
1 x Cable video GoPro
1 x Stickers-digit for marking
1 x Hardener P-25, canister 2.5Kg
1 x MEKP Harderner 100 g
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x resin-hardener L-385 H-385 (5000 g)
1 x Epoxy MID-CURE™ 15 min (130g)
1 x Mould Resin P 10 kg
1 x Epoxy QUIK-CURE™ 5 min (130g)
1 x resin-hardener L-385 H-385 (625 g)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x resin-hardener package L-385 with hardener H-385
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x resin-hardener L-385 H-385 (1250 g)
1 x Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Epoxy Resin L (2.5 Kg)
1 x White gelcoat 1 Kg
1 x Hardener Aero EPH 161 (500 g)
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x Interface Realflight Simulator
1 x Wheel collar 2 mm Ø (4 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
2 x Wheel collar 3 mm Ø (4 uds)
1 x Wheel collar 4 mm Ø (4 uds)
1 x Aluminun wheel collar 3 mm Ø (4 uds)
4,204.40EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies