Top » Catalog » Hardware » Servos » Gabriel-Stahlformenbau »

5.35EUR

14 mm servo arm with ball link

14 mm servo arm with ball link. It weights 0,8 g. The high torque of modern digital servos meke's necessarie this type of servo arms. It's made in high density plastic with carbon fiber (nylon with 45% carbon fiber content).The result of its manufactured is a high-strength component, which can be compared with Duralaluminium, but supports better the vibrations. It's manufactured in Germany using the latest CNC machines.

Available Options:

Accesories:

temporarily out of stock

Reviews

Customers who bought this product also purchased

Ball link M1.6 (6 uds) temporarily out of stock	Spare white 38-45 mm spinner temporarily out of stock	5 mm M2 variable horn temporarily out of stock
Silicone red 0,5 qmm wire ( 1 m) temporarily out of stock	Cable grommet Ø 6.4 mm (4 uds) temporarily out of stock	Conector FUTABA Servo female (10 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Tail tube RAINBOW
3 x	4 blades set
2 x	Blade Holder Full (4 blades)
1 x	Wheel keeper washer
1 x	Nut M2
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Tow hook for tug
1 x	SE Ring 350 mm (2 pcs)
1 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Adapter lead MPX/XT60
1 x	Tube Pitot to PIXHAWK
1 x
1 x	MZ-12, 6 Channel HoTT
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	DUPLEX 2.4EX Central Box 220
2 x	Cabel charger transmitter GRAUPNER
1 x	Interface Realflight Simulator
1 x	Ball Link Plier
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Battery RX JETI LiIon RB 3100 7.2v
1 x	CC 03
1 x	ASG 32 560 mm
2 x	Flip ARF (Top Model)
2 x	FANTASY ARF 3.0m, Fundas alas
2 x	Astra wing Joinner (Top Model)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Xplorer2 anemometro
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	BEC 3A FOXY
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Interface Jack Adapter IKARUS
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
2 x	Double conector with JR adapter and 200 mm extension
1 x	30 cm BEC cable (female)
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	20x200 mm battery rings
1 x	2,0x50 mm allen screwdriver
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	250 mm / 16 mm Airbrakes
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x	Concave-Convex sandpaper file 13 mm
1 x	Dremel PERMAGRIT thin lime
1 x	80 mm rods set for direction control
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	DSM 10 Dual Switch Mixer
1 x	Long pinned hinge (6 uds)
1 x	CC 02
1 x	Flap hinge (6 pcs)
1 x	Dremel 3000 130W
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
2 x	SE Ring 330 mm (4 pcs)
1 x	Antenna Hole Cap V1 (Silver)
1 x	800TVL CMOS camera for FPV
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Connector CAN 15
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	Switch Button DS Tx DUPLEX
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	Carbon fiber rod 0.8 mmx1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x	JETImodel DPS 40
1 x	Oracover Azul Cielo 2 m
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Tray JETI for DS-14/16/24 Black
1 x	LA500 Autogyro
1 x	Blade holder center GFK 0,5 mm
1 x	Blade holder lower
1 x	LA500 rotor head core
1 x	Bearing housing
1 x	Autogyro Cierva C30 Spain
1 x	Head core
1 x	Ball joint long
1 x	LA500 pilot-seat set
1 x	Balls 4 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Turbine CHEETAH 160 SE
1 x	Motor Mega AC 16/07/03
1 x	Motor Mega AC 16/10/03 RACE
1 x	Motor Mega AC 16/25/02
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	5 LiPo XH>EH adapter
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	28x5 mm wires output (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Cut tube
1 x	Xplorer1 anemometro
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Male connector for 20 pines AWG
1 x	Angle of incidence meter
1 x	Avia spare blue cockpit (Top Model)
1 x	Bidule 55 V3 2460 mm
1 x	Bidule 55 2460 mm Cabina
1 x	BIG MOSNTER
1 x	11 mm wing servo holder
1 x	DELPHIN Race 3.6m c64
1 x	SE Ring 300 mm (2 pcs)
1 x	Tape GFK 50 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	MIG 29 3D RTF, Servo
1 x	Rudder tandem for two Futaba servos
1 x	Floating M4 washer pad (36 pcs)
1 x	Screw M3x20 (10 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Socket Screw M3x9 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Propeller 9x7 SlowFlyer
1 x	Starter Sullivan-STAR 601
1 x	PROXXON - SAW BLADE 8MM 0ZI220E
1 x	Sealing Iron STANDARD
1 x	SE Ring 200 mm (2 pcs)
1 x	PROXXON - SAW BLADE DIAMOND OZI/E
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Connector Sub-D 2+5 Male
1 x	Schul-Malpinsel Gr.5
1 x	Power supply NT 40 Amp.
1 x	Dean "T" - Futaba Adapter
1 x	Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x	18 mm reinforced hinge
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	EWC3 100 cm wing connector
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	CM-3
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Landing gear frontal support 25x32x16
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Lead with adhesive (2 pcs)
1 x	Female connector for 10 pines AWG
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Female connector for 12 pines AWG
1 x
1 x	Male connector for 10 pines AWG
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	13 mm wing servo holder
2 x	Albatros ,spare cockpit (Top Model)
1 x	Aero-Master Wings (Aero-naut)
1 x	IKURA 4.0 m
1 x	Fascination 3600 mm, Spare Wings (Top Model)
1 x	Bidule 170 ARF 3.48 m
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	ARTIST 1.560 mm
1 x	Fascination 3600 mm ARC
1 x	ENIGMA ARF
1 x	FOX 3000 mm, Fuselage (FMS)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	90x75 mm standart servo cover
1 x	57 mm micro-mini servo cover
1 x
1 x	HERON RR
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Carbon servo arms for HITEC HS 65 (4 pcs)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Aluminium servo arm (2 uds)
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link

18,931.41EUR

Manufacturers

Manufacturer Info

-	Gabriel-stahlform Homepage
-	Other products

Notifications

Notify me of updates to 14 mm servo arm with ball link

Reviews

Write a review on this product!

Languages

Currencies

Insurance