2 x | Tail tube RAINBOW |
3 x | 4 blades set |
2 x | Blade Holder Full (4 blades) |
1 x | Wheel keeper washer |
1 x | Nut M2 |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Tow hook for tug |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Adapter lead MPX/XT60 |
1 x | Tube Pitot to PIXHAWK |
1 x | |
1 x | MZ-12, 6 Channel HoTT |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | DUPLEX 2.4EX Central Box 220 |
2 x | Cabel charger transmitter GRAUPNER |
1 x | Interface Realflight Simulator |
1 x | Ball Link Plier |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | CC 03 |
1 x | ASG 32 560 mm |
2 x | Flip ARF (Top Model) |
2 x | FANTASY ARF 3.0m, Fundas alas |
2 x | Astra wing Joinner (Top Model) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Xplorer2 anemometro |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | BEC 3A FOXY |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Interface Jack Adapter IKARUS |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | 30 cm BEC cable (female) |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 |
1 x | 20x200 mm battery rings |
1 x | 2,0x50 mm allen screwdriver |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
2 x | Concave-Convex sandpaper file 13 mm |
1 x | Dremel PERMAGRIT thin lime |
1 x | 80 mm rods set for direction control |
1 x | DUPLEX 2.4EX MFlow2 Gas 800 |
1 x | DSM 10 Dual Switch Mixer |
1 x | Long pinned hinge (6 uds) |
1 x | CC 02 |
1 x | Flap hinge (6 pcs) |
1 x | Dremel 3000 130W |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
2 x | SE Ring 330 mm (4 pcs) |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | 800TVL CMOS camera for FPV |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Connector CAN 15 |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
1 x | Switch Button DS Tx DUPLEX |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | JETImodel DPS 40 |
1 x | Oracover Azul Cielo 2 m |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Tray JETI for DS-14/16/24 Black |
1 x | LA500 Autogyro |
1 x | Blade holder center GFK 0,5 mm |
1 x | Blade holder lower |
1 x | LA500 rotor head core |
1 x | Bearing housing |
1 x | Autogyro Cierva C30 Spain |
1 x | Head core |
1 x | Ball joint long |
1 x | LA500 pilot-seat set |
1 x | Balls 4 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Turbine CHEETAH 160 SE |
1 x | Motor Mega AC 16/07/03 |
1 x | Motor Mega AC 16/10/03 RACE |
1 x | Motor Mega AC 16/25/02 |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | 5 LiPo XH>EH adapter |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Cut tube |
1 x | Xplorer1 anemometro |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Male connector for 20 pines AWG |
1 x | Angle of incidence meter |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Bidule 55 V3 2460 mm |
1 x | Bidule 55 2460 mm Cabina |
1 x | BIG MOSNTER |
1 x | 11 mm wing servo holder |
1 x | DELPHIN Race 3.6m c64 |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Tape GFK 50 mm |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | MIG 29 3D RTF, Servo |
1 x | Rudder tandem for two Futaba servos |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Screw M3x20 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Socket Screw M3x9 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Propeller 9x7 SlowFlyer |
1 x | Starter Sullivan-STAR 601 |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | Sealing Iron STANDARD |
1 x | SE Ring 200 mm (2 pcs) |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Connector Sub-D 2+5 Male |
1 x | Schul-Malpinsel Gr.5 |
1 x | Power supply NT 40 Amp. |
1 x | Dean "T" - Futaba Adapter |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | 18 mm reinforced hinge |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | EWC3 100 cm wing connector |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | CM-3 |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Female connector for 10 pines AWG |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Female connector for 12 pines AWG |
1 x | |
1 x | Male connector for 10 pines AWG |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | 13 mm wing servo holder |
2 x | Albatros ,spare cockpit (Top Model) |
1 x | Aero-Master Wings (Aero-naut) |
1 x | IKURA 4.0 m |
1 x | Fascination 3600 mm, Spare Wings (Top Model) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | ARTIST 1.560 mm |
1 x | Fascination 3600 mm ARC |
1 x | ENIGMA ARF |
1 x | FOX 3000 mm, Fuselage (FMS) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | 90x75 mm standart servo cover |
1 x | 57 mm micro-mini servo cover |
1 x | |
1 x | HERON RR |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Aluminium servo arm (2 uds) |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Futaba 2x20 mm servo double arm |
1 x | Tapping Screw M2.9x13 (10 pcs) |
1 x | Screw M3x16 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Screw M3x8(10 pcs) |
1 x | FOX 2.300 mm V2 PNP (FMS) |
1 x | Tapping Screw M2.2x9.5 (10 pcs) |
1 x | Albatros red/white (Top Model) |
1 x | Fournier RF-4D |
1 x | Socket Head Screw M2,5x12 |
|
20,239.11EUR |