Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
2 x	Pine wood slat 5.0x5.0x1000 mm
2 x	BALSA trip 3.0x3.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
2 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
4 x	Pine wood slat 2.0x10.0x1000 mm
2 x	Walnut wood slat 2.0x2.0x1000 mm
2 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
2 x	Pine wood slat 10x10x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Liston HAYA 10 x 10 x 1000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	50m servo "Premium" wire (white/red/blue)
3 x	Cable Cargador FUTABA
2 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
3 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	10m servo "Premium" wire (white/red/blue)
2 x	200m servo "Premium" wire (white/red/blue)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
2 x	1 m servo "Premium" wire (white/red/blue)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
1 x	5 line servos wire black (1 m)
1 x	Xplorer2 anemometro
2 x	Xplorer1 anemometro
1 x	Xplorer4 anemometro
2 x	Xplorer3 anemometro
1 x	18 mm reinforced hinge
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
3 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	Micro flex hinge (12 uds)
1 x	Miniature brass strap hinge, 1 m
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	15 mm reinforced hinge
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Gates hinge
1 x	Long pinned hinge (6 uds)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Paramotor BackPack XXS 2
1 x	Long ball link M2 (6 uds)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Partall paste 650 g
1 x	Balsa panel 1.5x100x1000 mm
2 x	BALSA trip 6.0x6.0x1000 mm
2 x	A/C quality beech plywood 600x300x6.0 mm
2 x	Birch plywood plate 600x300x2.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
2 x	Birch plywood plate 600x300x1.2 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
2 x	Balsa panel 5.0x100x1000 mm
2 x	BALSA trip 10x10x1000 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Tube support Ø 6mm (10 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Beech dowels 2.0 x 1000 mm
2 x	BALSA trip 4.0x4.0x1000 mm
1 x	Support XT60 conector (2 pcs)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Small pinned hinge (12 uds)
2 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
2 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Green silicone 0,25 qmm wire (50 m)
2 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
2 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
2 x	Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	MPX plug mold V1
1 x	Propeller diller for DLE111 and DA85-150
1 x	Mold plugs XT-30
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Sub-D Plug Mold
1 x	Digital weight, angle and balance meter BASIC
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
2 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
2 x	Protective Cover for wires Ø 10 mm 1000 mm
2 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Epoxy Casting Resin + Hardener "water-clear" (300 min)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Small Crow DLE-170M
1 x	Motor DLE 200cc Std
1 x	Balsa panel 2.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Propeller diller 5/6,3/8/9
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
2 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	DUPLEX 2.4EX Central Box 220
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2.4EX RC Power Switch 10
1 x	Cyano INSTA - CURE™ Pocket (18g)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Cyano SUPER - GOLD™ (12g)
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Cyano SUPER - GOLD™ Pocket (18g)
1 x	Cyano INSTA - CURE™ (56g)
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 4 cell
1 x	Silicone red 1,0 qmm wire (100 m)
2 x	Silicone red 1,5 qmm wire ( 1 m)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Silicone red 0,75 qmm wire ( 1 m)
1 x	Silicone black 6,0 qmm wire ( 1 m)
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	DC24 II Transmitter case insert
1 x	DUPLEX 2.4EX MFlow2 Gas 800
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	Black tray 2,4EX DC-16/14/24 black
1 x	DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Catalyst INSTA - SET™ (60g)
1 x	ExtraCA Top
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Thread locker IC-Loc™ red "high" 10 ml
1 x	FOAM - CURE™ (24g)
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Catalyst INSTA - SET™ (235g)
1 x	Epoxy FINISH-CURE™ 20 min (130g)
1 x	Profile ABS half cane 4x1000 mm
1 x	Cyano INSTA - CURE™ (225g)
1 x	Cyano INSTA - FLEX+™ (25g)
1 x	Rubber profile 8-2 mm 2M
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Epoxy SLOW-CURE™ 30 min (130g)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Silicone red 2,5 qmm wire ( 25 m)
1 x	Silicone red 4,0 qmm wire (25 m)
1 x	Silicone red 0,75 qmm wire ( 25 m)
1 x	Epoxy 40 min (Resin). 25Kg
1 x	Epoxy 10 min 190g
1 x	Servo Mount M (blue)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Blue aluminium servo arm V1-Hitec 20 mm M2
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Epoxy 40 min. 4kg (Hardener)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Marker ties (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Round flex hinge (12 uds)
1 x	Epoxy 5 min. 500 g (Resin)
1 x	Epoxy 5 min. 200g
1 x	Epoxy 40 min (Resin). 5 Kg
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Epoxy Resin L + Hardener LT kit/ 895g
1 x	Epoxy 30 min. 200g
1 x	Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x	Epoxy Resin L + Hardener L (40 min) 240g (200g Resin L + 40g Har
1 x	Small flex hinge (12 uds)
1 x	Foaming agent for epoxy resins 200 g
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Robart Door Hinge (Pk2)

9,844.70EUR