1 x | SIMtransmitter 6 Mode 2 |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Screw-lock connector M2 (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
3 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
3 x | Locking cable tie 4.6x203 (uds) |
3 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
3 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
3 x | Cockpit plastic closing |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
3 x | Steering arm 16 mm Ø 3 mm |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | One touch canopy lock |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | 1/6 Pilot "John" |
1 x | Pilot "Duke" Legends Series (Slimline) |
2 x | 1/6 Pilot "Tony" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
2 x | Piloto jet 130 mm |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 1/12 Pilot "Fighter" |
2 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | 1/12 Pilot "Tom" |
2 x | Piloto Jet "Green" 1/6 Scale |
1 x | Piloto JET 1:3,5 |
2 x | 1/7 Pilot "Japanese" |
2 x | 1/4 Pilot "Heidi" |
1 x | 1/4 Pilot "Mike" |
3 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/12 Pilot "Langley" |
2 x | 1/6 Pilot "Buddy" |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Ball link M3 (10 pcs) |
1 x | Oracover Yellow CUB 10 m |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
3 x | Pushrod greyline 3/2 with coupler M2 |
2 x | 90 mm rods + T patellas set for direction control |
3 x | Allen wheel collar M4x6 |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Support Antena 2.4 Ghz (2 pcs) |
3 x | Cable grommet Ø 4 mm (4 uds) |
3 x | Steering arm 16 mm Ø 4 mm |
3 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Xplorer2 anemometro |
1 x | 100g Flux Paste for Silver Solder |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | 3-blades 20x12 carbon prop Super Silence |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow |
1 x | 3-blades 24x12 carbon prop Super Silence |
1 x | 24x10 prop Super Silence |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Xplorer1 anemometro |
1 x | Pilot "Goose" (Slimline) |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
2 x | 1/6 Pilot "Cindy" |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Wheel collar 6 mm Ø (4 uds) |
2 x | Tip wing protector 30x10 (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Pushrod greyline 4/3 with coupler M3 |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
2 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | SUS wire 3m (nylon coated) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | Wing bolts M3 Steel screw blue (2 pcs) |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
2 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Wheel collar 3.5 mm Ø (4 uds) |
2 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | Window mounting channel 5m |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | FUTABA 6L + R3106 2.4GHz |
1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
1 x | Futaba Radio Case |
1 x | Futaba 3010 - Gear Set |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Cable S.BUS 3 salidas 100 mm |
1 x | Futaba R3006SB T-FHSS 2.4GHz |
1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs. |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | 3-blades 28x12 carbon prop Super Silence |
2 x | 11 mm Rubber pads (14 pcs) |
2 x | Kavan Car 25% nitro 1l |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Decorative caps, multicoloured |
1 x | Adjustable brass horn threaded M3 |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Conector JAPAN G2 Set 5 pares |
3 x | 41x5,5 mm wires output (2 pcs) |
2 x | Cable grommet 9.5 mm (4 uds) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | PT 21x13 EL Propeller |
1 x | Battery FUTABA 18MZ |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | FUTABA F14 + R168DF + Servo S148 |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C |
1 x | Futaba Prop Module F14 |
1 x | Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.) |
1 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Cable FUTABA profesor-alumno LEAD 9C cuadrado-cuadrado |
1 x | Futaba Neckstrap |
1 x | Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | Futaba BLS152 - Upper Case |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER |
1 x | Charger FUTABA SQN30W12P-08 220v |
1 x | Futaba S-Bus Rx/Gyro Link Lead |
1 x | Ant. Cable R606/17/08/14FS L:1500mm |
1 x | Futaba F14 Twin Boat Stick |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
2 x | Snap pin for micro clevis (10 uds) |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Split M1,2x10 (10 pcs) |
1 x | Esc KOSMIK 200+ HV |
1 x | KIRA 600-16 |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | Fuel bottle 500 ccm |
1 x | Emisora FUTABA T18 SZ + R7208SB |
1 x | Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter |
1 x | Cable coupler M2 (10 uds) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Flap hinge (6 pcs) |
1 x | Distanzstück motor OS 120 AX |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Coupling bush 5 - 5 mm |
1 x | 28 mm tailwheel unit |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Charger LiPo Charger4 |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Canopy Latch |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Decorative caps, multicoloured, short |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Foam plastic plates (310x210x8 mm) |
2 x | Allen wheel collar M3x3 |
2 x | Snap for floding prop for 2 mm axi |
2 x | Control for forward wheel (MINI) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Split pin 1x8 mm (10 uds) |
2 x | Tip wing protector 40x14 (2 pcs) |
1 x | Snap short M2 (10 uds) |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Snap long M2 (10 uds) |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | 38x4,5 mm wires output (2 pcs) |
3 x | Allen wheel collar M4x4 |
1 x | 1/12 Pilot "Cougar" |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | PT 16x10 E Propeller |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
2 x | Landing gear frontal support 25x32x16 |
1 x | Ball Bearing Oil 25 ml |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | Propeller MEJLIK 28x10 |
1 x | Propeller MENZ-S 15x8 |
1 x | Carbon plate 350x150x3.0 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Tail gear set (60-120 class) |
1 x | PRO-HV Dual Action Valve |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Retract undercarriage |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Vess propeller 11x7 S |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Propeller MENZ-S 18x8 |
1 x | Propeller MENZ-S 16x8 3-Blades |
1 x | BETA 1400 RTF Red |
1 x | Propeller FOXY 34x12 2-Bl |
1 x | Ciano KAVAN Thin 20g |
1 x | Propeller MENZ-S 20x12 |
1 x | Ciano KAVAN Thick 20g |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | 45 mm rods set for direction control |
1 x | Cockpit metalic closing |
1 x | Clip fixing for wing (2 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Festo 6mm Tubing Holder (10 uds) |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Tail wheel for 8-12 kg models |
1 x | Kit wheel loader 966G II without electrics, without hydrauli |
2 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | AXI Cooler 41xx |
1 x | FIALA Propeller 23x8 Electric |
1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | PropCover 16-20" (1 pcs) |
1 x | Propeller FIALA 15x8 3-Blade |
1 x | Vess propeller 12x7 S |
1 x | Propeller VESS 32A |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
2 x | Lead with adhesive (2 pcs) |
2 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Actuator Electric 25 mm HIGH TORQUE |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | 22x10 BIELA pusher propeller |
1 x | |
1 x | Propeller MENZ-S 21x10 |
1 x | Propeller MENZ-S 17x6 |
1 x | 18x8 BIELA 3Bl propeller (3-blades) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | 18x8 BIELA propeller |
1 x | Propeller MEJLIK 23x8 CFK |
1 x | 17x10 BIELA propeller (3-blades) |
1 x | 19x8 BIELA propeller |
1 x | 18x6 BIELA propeller |
1 x | Propeller MEJLIK 24x10 TH |
1 x | Conector MR-60 (pareja) |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | Electric Fuel Pump 12v |
1 x | Propeller MENZ-S 18x12 |
1 x | SKY RC T400Q Charger 4x100w |
1 x | 21x12D BIELA propeller (3-blades) |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | Combustible Glow "KAVAN" air/heli 5% nitro |
1 x | Propeller MEJLIK 21x8 CFK |
1 x | BETA 1400 ARF Red |
1 x | 22x10 BIELA propeller |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Engine mounts for .09 - .19 engine |
1 x | 18x10 BIELA 3Bl propeller (3-blades) |
1 x | Propeller MEJLIK 18x8 CFK |
1 x | Propeller MENZ-S 15x8 3 blades |
1 x | Propeller MENZ-S 17x10 |
1 x | 24x10 4Bl Scale |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | Propeller MENZ-S 16x6 |
1 x | Glow Plug Clip 1.3 Ah |
1 x | Propeller MENZ-S 20x12 3 blades |
1 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Propeller MENZ-S 20x10 |
1 x | 26x12 BIELA 3Bl Pusher propeller |
1 x | Allen wheel collar M3x5 |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Covered closure or fairings |
3 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | 80 mm rods set for direction control |
1 x | 140 mm rods set for direction control |
2 x | 100 mm rods set for direction control |
1 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Cockpit latch closing I=10 mm |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Pushrod octagone 4/3 |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Cockpit aluminium closing |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Landing gear strap medium (4 uds) |
1 x | Tailwheel for F3A size |
1 x | Tailwheel for 1-3 kg models |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Landing gear strap large (4 uds) |
1 x | Tren de cola carbono 50-70cc |
1 x | Neumatic retractable landing gear (Aero-Naut) |
1 x | Dual Sequencer Gear and Canopy |
1 x | Tailwheel for 40/90 size |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Quick hose connector 4-4 mm |
1 x | Quick hose connector 3-3 mm |
1 x | Festo 4mm Tubing Holder (10 uds) |
|
22,923.83EUR |