1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Ball link aluminio M3 V1 (10 pcs)
2 x Acoplador Micro M2 Ø 0,8 mm (10 pcs)
1 x Ball link M2 (10 pcs)
1 x Acoplador Micro M2 Ø 1 mm (10 pcs)
1 x Acoplador M2,5 Ø 2 mm (10 pcs)
1 x Clevis con trasmisión M3
1 x Acople ALU M3 Ø 4 (2 uds)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Acoplador para cable M4 (10 pcs)
2 x Acople ALU M2,5 Ø 6 (2 uds)
1 x Ball link ALU M2/2 con rodamiento (1 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Acople ALU M2,5 Ø 4 (2 uds)
1 x Acoplador "Z" Ø 1.8 (2 uds)
2 x Crimping sleeves para cables de 1.1 mm (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Ball link ALU M3/2 con rodamiento (1 pcs)
1 x Acople ALU M3 Ø 5 (2 uds)
1 x Ball link Aluminio M3 (2 pcs)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Acoplador "Z" Ø 1 (2 uds)
2 x Acoplador "Z" Ø 2 (2 uds)
1 x Cable silicona 0,25 mm² rojo (25 m)
1 x Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x Cable servos silicona 0,50 mm2 Futaba (100 m)
1 x Cable servos silicona 0,25 mm2 Graupner (100 m)
1 x Cable servo PREMIUM 50m (blanco/rojo/azul)
1 x Cable servos silicona 0,35 mm2 Futaba (100 m)
1 x Cable servo PREMIUM 10m (blanco/rojo/azul)
1 x Cable servos PVC 0,14 mm2 Graupner (100 m)
1 x Cable servo 5 lineas negro (1m)
1 x Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Cable servos silicona 0,35 mm2 Graupner (100 m)
1 x Cable silicona 0,25 mm² blanco (25 m)
1 x Cable servos silicona 0,50 mm2 Graupner (100 m)
1 x Cable servo JR silicona 0,35 mm2 / 5m
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x Cable silicona 0,25 mm² negro (25 m)
1 x LASER 73" 1.85m (05) PILOT
1 x Helice APC 14x8.5 Electric Pusher
1 x Cable acero trenzado Ø 0,62 mm (10 m)
1 x Anclaje cabina en L "tipo F3A" (2 pcs)
1 x PCARD sistema wireless
1 x Soporte para bridas de hasta 3 mm (10 pcs)
1 x Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
1 x Gafas Zurich Sport Sunglasse Dark Sensity MAGENTA
2 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (10 pcs)
1 x Ply-Span 450x600/13g Amarillo
1 x Monokote ROJO misil (1.8x0.65m)
1 x Spray pintura Elapor Rojo 400 ml
1 x Set clevis para pull-pull (TY13233 y TY13234)
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
2 x Terminales riostras M2,5 (2 pcs)
1 x Pull-Pull set completo acero inox. 4 m (max 20 kg)
2 x Porta kwiw link M2,5 (10 pcs)
1 x Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
2 x Polea de bronce 6/1,5 (2 pcs)
1 x Terminales riostras M6x66 (2 uds)
1 x Soporte Filtro FESTO
1 x Acople ALU M2,5 Ø 3 (2 uds)
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Terminales riostras M3x16 (2 uds)
1 x Ball link V1 Ø7 M4/3 (6 uds)
2 x Acoplador M2 (10 uds)
2 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Polea de bronce 16/2 (2 pcs)
1 x Kwik link micro (10 uds)
2 x Kwik link negro largo (10 pcs)
2 x Pin Ø 2,5 mm para Kwik link MPJ2170/2173 (6 pcs)
1 x Pasacables con soporte GFK "A" (2 pcs)
1 x Pin 2,0 para terminales riostras M2,0 ⌀ (6 pcs)
1 x Pin Ø 1,6 mm para Kwik link MPJ2150/2157 (6 pcs)
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
2 x Kwik link metálico M2,5 (10 uds)
1 x Ballast 700gr OPALE
1 x Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Cable silicona 0,5 mm2 azul (50 m)
1 x Regulador MEZON 115 Opto
1 x Interruptor magnetico (PCB) DPSI
1 x Tren aterrizaje Electrico "Black Edition" ULTIMATUM 3.0 (Electro
1 x Helice FALCON 20x9 carbono-gas
1 x Ball link latón BS M3 V1 (10 pcs)
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Bancada servo gancho
1 x Autogiro Cierva C30 Spain
2 x Batería Sanyo Eneloop AA 1,2 V 2000 mAh
1 x Batería Sanyo Eneloop AA 1,2 V 2400 mAh
2 x Batería Sanyo Eneloop RX 4,8 V JR
1 x Fibra de vidrio 163 g/m² 1 m x 20 m (Aero, finish FK 144, plain)
1 x Fibra de vidrio 163 g/m² 1 m x 10 m (Aero, finish FK 144, plain)
1 x Fibra de vidrio 49 g/m² (1,10 x 1m)
1 x Fibra de vidrio 25 g/m² 5000x1270 mm
1 x Fibra vidrio 160 g/m2 "twill weave" (10 m x 1 m)
1 x Fibra de vidrio 163 g/m² 1 m x 50 m (Aero, finish FK 144, plain)
1 x Fibra carbono tela 240g/m2 100 cm x 2 m
1 x Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Batería Sanyo Eneloop AAA 1,2 V 800 mAh
1 x Fibra de vidrio 80 g/m² (silane, tela cruzada) 100 cm x 50m
1 x Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x Tensor de riostras M1,6x17/27 (2pcs)
1 x Tensor de riostras M2,5x27/43 (2pcs)
1 x Acoplador M3 (10 uds)
1 x Pasacables con soporte GFK "B" (2 pcs)
1 x Sistema para cables con tensor (azul)
1 x Fibra carbono tela 245g/m2 125 cm x 20 m
1 x Conector MR-60 (pareja)
1 x Tensor de riostras M2x29/43 (2pcs)
1 x Pin Ø 2 mm para Kwik link MPJ2162/2163 (6 pcs)
1 x Kwik link pequeño (10 pcs)
1 x Polea de bronce 12/2 (2 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Kwik link aluminio M3 L:30mm (6 uds) pinØ 1.6mm Izda
1 x Kwik link y brazo de nylon M4xM2,5xL30
1 x Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6
1 x Hélice tripala 8x6
1 x Hélice Electric Carbon 6x5
1 x Hélice Electric Carbon 9.5x7
1 x DUPLEX 2,4 EX MUI150 Sensor
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 22 rollos
1 x Cinta fibra Carbono 125 g/m², 3k, UD (100 mm) roll/ 50 m
1 x Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x Fibra carbono tela 160g/m2 127 cm x 10 m
1 x Cartuchos de humo AX-18 blanco (5 pcs)
1 x Cartuchos de humo AX-9 blanco (10 pcs)
1 x ASG 32 560 mm
1 x Iniciadores para AX-60 (5 pcs)
1 x Cargas cohete B4-0 (6 pcs)
1 x Hélice tripala 6x4
1 x Hélice Electric Carbon 8.5x5
1 x Helice tripala 16x10 Master Airscrew
1 x Caps multicolor Switch JETI
1 x Iniciador FTX2 Wireless Transmisor
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2.4EX Central Box 320
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x Aceite Humo Blue 5 l
1 x Bateria LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x Aceite VALVOLINE SynPower 2T 1litro
1 x Bolsa vacio 1200 mm x 50 m
1 x Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave)
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (10 pcs)
1 x Fibra carbono tela 160g/m2 127 cm x 1 m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 100m
1 x Cinta fibra Carbono 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs)
1 x Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x Kwik link metálico con bola M3 (10 uds)
1 x EDGE XL Orange
1 x Cartuchos de humo AX-60 negro (5 pcs)
1 x Cartuchos de humo AX-60 blanco (5 pcs)
1 x Soportes para puntas de alas para AX-18/AX-60 (2 pcs)
1 x BETA 1400 RTF Red
1 x Soporte ventral para AX-18/AX-60
1 x Iniciadores para AX-60 (5 pcs)
1 x Cartuchos de humo AX-60 mezclados (5 pcs)
1 x Sistema remoto de ignición eléctrica
1 x Cartuchos de humo AX-60 amarillo (5 pcs)
1 x EDGE 540 V3 (Superlite) ORANGE
1 x BETA 1400 ARF Red
1 x Cartuchos de humo AX-3 blanco (10 pcs)
1 x Tubo carton cohete 25mm x 24mm x 230mm
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x Tubo carton cohete 50mm x 48mm x 250mm
1 x Me-163
1 x Catapulta Vasa model
1 x Bungee HLG Premium
1 x Batería Panasonic Eneloop AA 1,2 V 1900 mAh
1 x Batería Sanyo Eneloop RX 4,0 V AAA JR
11,961.75EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas