2,175.00EUR

Turbina XICOY X95 compact
[XIX95C]


Specifications
In the early 2000s, Wren Turbines launched the famous Wren44, the smallest engine available at the time. The diameter of the engine was only 76mm and in its earliest form, the MW44 developed 30N of thrust, later variants increasing to 50N. Its size quickly defined the standard in small engine class, and several manufacturers developed engines of similar size, increasing the power in every new model, currently within the market, this diameter engine covers a range of thrusts, 45N, 50N, 55N, and 70N.
The X95, as all Xicoy engines, push the limit well beyond our competitors, raising the power to 95N, almost 3 times the power of the original MW44 and with the added benefit of lower overall weight.
The X95 is of the same size of previous X90 and X85 engines, using all new internal parts like rotor, stator and combustion chamber.
Thanks to the FlexThrust technology, the X95 can be used in all aeromodels designed for the MW44 and similar engines of 45N to much bigger models needing up to 95N, greatly improving the choices when looking for your next plane! As with all Xicoy Engines our purpose designed X95 electronics offers an industry leading simple, lightweight installation. One of The biggest hurdles in Turbine Design is Specific Fuel Consumption (SPFC), the X95 has the lowest TSFC.
The engine is offered in Compact or Light versions.
Specifications PRELIMINARY
Thrust: Continuously adjustable from 45 to 95N (9,7kgf, 21,4 Lbf)
Size: 76mm diameter, 183mm long
Weight: 706g (1,56lb) engine only, 888g (1,96lb) total installed weight except battery
Rpm Range: 48,000 ... 175.000 RPM
Idle Thrust: 3.8N (0,4kg/0,85Lbf)
Fuel: Kerosene + 4% oil. Diesel allowed but not reccomended. Fuels containing Biodiesel not allowed.
Fuel consumption: 260g/minute (330ml/m) at 95N
Starter motor: High speed brush-less
Fuel pump: Digitally controlled brush-less pump
Telemetry: Jeti/Futaba/MPX/Core/Hott/FrSky/Spektrum and Bluetooth Android and IOS (optional modules)
Service interval: 25 hours
Reccomended battery: 2s Lipo/2200mAh reccomended. (3s Life compatible, not recommended). Battery not included
Other: Built in sensors for ambient temperature and atmospheric pressure to automatically adjust the engine performance


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Futaba 76/92 mm servo pull-pull double arm with ball link
2 x Futaba 24/30 mm servo pull-pull double arm with ball link
1 x Futaba 52 mm servo arm
1 x Hitec 25 mm servo arm with ball link
1 x Futaba 30 mm servo arm with M3 ball link
1 x Futaba 25 mm servo arm with ball link
1 x Futaba 14/20 mm servo pull-pull double arm with ball link
1 x Servo safety connector (10 pcs)
1 x Hitec 25 mm servo arm with M3 ball link
2 x Futaba 2x20 mm servo double arm
1 x Futaba 46 mm servo arm with ball link
1 x Hitec 38 mm servo arm
1 x Vertical mounting servo holder
2 x Horizontal mounting servo holder
1 x Futaba 50/60 mm servo pull-pull double arm with ball link
2 x Hitec 20 mm servo arm
1 x Hitec 52 mm servo arm
1 x Adapter rotula M3
1 x Rudder tandem for two Futaba servos
1 x Futaba 30 mm servo rounded arm
2 x Horizontal servo holder
1 x Hitec 38 mm servo arm with ball link
1 x 54 mm Futaba servo arm tandem with ball link
1 x Futaba 38 mm servo arm
1 x Futaba 20 mm servo arm
1 x FUTABA 20 mm servo arm with ball link
3 x Piñones SAVOX SH-0350
3 x Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
2 x Servoarm Aluminium SH-82
1 x Servo SAVOX SB-2290 SG
3 x Savox Brushless Servo SC-1267 SG
1 x SAVOX SH 0254 servo
3 x Servo SAVOX SV-1261 MG
2 x Servo SAVOX SV-1270 TG
3 x Savox HV Brushless Servo SB-2270SG (Swashplate)
2 x Servo SAVOX SH 0257 MG
1 x Servo SAVOX SA-1258 TG
2 x Servo SAVOX SA-128S SG
1 x Servo SAVOX SV-0236 MG HV
1 x Servoarm SH-81, two sides, aluminium
1 x SSPS105 Super Hi-Power servo
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
2 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
2 x Carbon fiber rod 2.0 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
2 x Carbon fiber rod 1.0 mm x 1000 mm
2 x Carbon fiber rod 1.5 mm x 2000 mm
2 x Carbon fiber rod 14 mmx1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Glases Flitemaster
1 x Glases Moritz
1 x 17 mm servo arm with ball link DES Graupner
1 x Propeller POWER-PROP 14x9
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x MAX pilot ARTF
1 x Futaba Female 40 cm extension
1 x Hitec 30 mm servo rounded arm
1 x Servo ROBBE FS-31 Pico Servo
2 x SAVOX SH 1250 MG servo digi
1 x Support pumb/filter Xicoy X45
1 x Soporte filtro FESTO (4 pcs)
1 x Support FUEL DOT V3
1 x Support Pitot JETI
2 x Servo SAVOX SW-1250 MG digi
1 x Shaft sleeve LAMA
1 x Support XT60 conector (2 pcs)
1 x Carbon plate 350x150x1.0 mm
1 x VTX 477 Carbon Rotorblade
1 x LOGO 600 SX (kit)
2 x Glases Stratus
2 x SAVOX SH 0255 MG servo
2 x Servo mounting frame SV-1260MG
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Cut tube
1 x Crimping tool
1 x 3,0x60 mm allen screwdriver
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x Digital weight, angle and balance meter BASIC
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Copier 5x20 cm pcs
1 x 55% silver electrodes (2 pcs)
1 x Digital precision scale up to 2000 g
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Copier 2x20 cm pcs
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x 100g Flux Paste for Silver Solder
1 x ABS angle 6,0x6,0x1000 mm
1 x Profile ABS half cane 8.0x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x Servo Mount S (red)
1 x Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x X-RAY Micro QR
1 x Motor ROTO-35 FS BM 4T
1 x Motor ROTO-85 FS NG 4T 2 cylinder Boxer
1 x Ignition RM-25V
1 x Sanyo TX Battery Eneloop 9,6 V Hitec
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Glases Aspen
1 x Glases Ace
1 x Servo SAVOX SA-1256 TG
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Suncover 100cc Red
1 x Red aluminium servo arm V1-Futaba 23 mm M2
1 x Servo SAVOX SV-1260 MG
8,737.55EUR
Manufacturers
Manufacturer Info
Xicoy Turbine
Other products
Languages
Español English
Currencies