1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Vest clothes Hispano Aviación
1 x Shirt Hispano Aviación
1 x 1/10 Pilot "Jack"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x BOX-Setup Actro-marine
2 x Fueraborda RETRO
1 x Electronic fog horn
1 x Allen wheel collar M4x4
1 x Rigid coupling brass Ø 4 mm L: 25 mm
1 x Railing Ø 2mm (20 pcs)
2 x 20 mm carbon horn
1 x 3 mm Long Prop Adapter M5
1 x 101x28 mm (4.0") Type jets aluminium core wheel
1 x 
1 x Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x Cap Hispano Aviación
2 x Q-12 2000 mm Electric
1 x Landing gear retract neumatic (Jet Legend)
1 x Neumatic retractable landing gear (Aero-Naut)
1 x Astra (Top Model)
1 x Q-12 X-light 2000 mm Electric
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Cable video GoPro and 5V cable
1 x Extension Arm for Carburetor (red)
1 x Cargador para AA/AAA Ni-MH & Ni-Cd
1 x Balsa panel 2.5x100x1000 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Cannon 53/6 mm
1 x Bags MB-339 (Wings & Elevators)
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück
1 x Balsa panel 3.0x100x1000 mm
1 x Carbon plate 350x150x3.0 mm
1 x Balsa panel 6.0x100x1000 mm
1 x Cockpit aluminium closing 4.7g
1 x 3,9 mm ZG20-ZG38 servo arm
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Pick up for motor Moki 250 cc 7 cylinders
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x RX cabel
1 x Robart Door Hinge (Pk2)
1 x Electric Fuel Pump 12V
1 x 800TVL CMOS camera for FPV
1 x Nylon hinge for flaps 33x9 (2 pcs)
2 x Smoke pump RCEXL
1 x Gates hinge aluminium (1 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x RX external cable for estandar receivers
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Trailing edge BALSA 35x8x1000 mm
1 x LiPo Storage Box Standard 1 Type 1
1 x Captador RCEXL para DA
1 x Vacuum pump P1-N
1 x 290 mm 8x4 M4 shaft ship
1 x Vacuum pump 12 CFM
1 x 25 mm carbon servo arm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Sensor Ignition RCEXL Universal
1 x Cabel "Y" 15 cm
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x Carbon plate 550x350x1.0 mm ECOTECH
1 x Cabestrante 13 x12 mm (5 pcs)
1 x Chigre de amarre Scale 1:32
1 x Carbon plate 350x150x0.5 mm
1 x Charger SKY RC D200 neo
1 x Cancamo Ms 7 mm (50 pcs)
2 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x BALSA triangular 10x10x1000 mm
1 x Baseplate servo
1 x Charger ISDT 608AC 200W
1 x Carbon plate 350x150x1.5 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Cannon 12.7 cm (2 pcs)
1 x Carbon plate 350x150x1.0 mm
1 x Boat 82 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Capstan of plastic 91x44x45 mm
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Carbon plate 350x150x4.0 mm
2 x Conector XT-150 6mm (Set: 5 pares)
1 x Balsa panel 8.0x100x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x Coupling for 5 mm axis
1 x Eje barco 450x4 mm M4
1 x Cable video GoPro
1 x Fuselage Bags JEEMO
1 x XICOY X45 rail
1 x TAKEO 3.6m electric
1 x 460 mm EPP Floats
1 x 20-25mm Servo Arm
1 x Gracia (Top Model)
1 x Jeemo Dolly
1 x VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit
1 x VIPER JET G2 Esq. 2 White/Red
1 x Gracia Maxi ARF (Top Model)
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x Hovercraft sailcloth
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 
1 x Digital weight, angle and balance meter BASIC
1 x Actuator Electric 25 mm
1 x E_brakes electronics
1 x Motor holder AXI
1 x Motor MVVS 5.6/690 GLIDER
1 x Cockpit aluminium closing 5.4g
1 x Horn DUBRO 1/2A
1 x Female connector for 6 pines AWG
1 x Female connector for 10 pines AWG
1 x Cockpit plastic closing
1 x Gracia Maxi ARF, bags (Top Model)
1 x AXI 2814/6D V2
1 x AXI 2820/14 V2
1 x Motor Mega AC 16/15/05 CE F5J
1 x KIRA 480-26 5,2:1
1 x Motor A50-12 L V4
1 x XPower XC4226/12 LS
1 x Motor A30-12 XL Glider
1 x Motor Mega AC 16/15/07
1 x AXI 2826/12 V2 Long
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x MR30 connector male
1 x Connectors MPX male
1 x 38 mm aluminium spinner.
1 x Spinner 110 mm GFK
1 x Connectors DEANS (T) micro
1 x Spinner 60 mm GFK
1 x Decorative caps, multicoloured, short
1 x 280 cc gasoline fuel tank complet
1 x 
1 x Coupling bush 5 - 5 mm
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Lite Plywood panel 600x300x3.0 mm
1 x Male connector for 10 pines AWG
1 x 42,0 mm propeller (rigth propeller)
1 x Bandera Frankr 4x6
1 x Propeller AERO-NAUT M4 65 mm (6 Blades pr) (Right hydropropeller
1 x Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
20,294.48EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies