1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x ABS Strip 1.5x8.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
2 x ABS I Strip 10x5x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip 2,5x1,25x330 mm
2 x Strip ABS 2.0x5.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 2,5x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Oratex Natural White 20m
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x Oracover Black 2 m
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover Verde 2 m
1 x Oracover CARBON Metalic 1 m
1 x Oracover Yellow CUB 2 m
3 x Digital Air Speed Sensor And Pitot Tube Set
1 x ORACOVER Fluor red (2 m)
2 x ORACOVER transparent Yellow (10 m)
1 x Oracover Brown 2 m
1 x MYLAR film A350 (1000x500 mm)
1 x PROFICOVER 5m
1 x Ply-Span 450x600/13g Yellow
1 x Ply-Span 450x600/13g Red
1 x Oracover Green10 m
1 x Oratex Antik 2m
1 x Oracover Orange 2 m
1 x Optical RPM Sensor
1 x Ring 320 mm length (5 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 360 mm (2 pcs)
1 x Spikes Band (5 m)
1 x Tape GFK 38 mm
1 x SE Ring 400 mm (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 480 mm (2 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x 800TVL CMOS camera for FPV
2 x Big-Malibu XL Roof box with surfboard rack GREY
1 x XH male balance (5S) connector (2 pcs)
1 x Solvent Plasti Dip 1000 ml
1 x 1000 ml sealer (DOPE)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x ABS Strip 1.0x4.0x1000 mm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Conexion PREMIUM MAXI fuselaje/alas 200 cm one4one
1 x Support conector MPX (6 pcs)
2 x Tapa estado carga XT-60 (6 pcs)
1 x Strip 1,5x1,5x330 mm
1 x ABS tube 18.0x16.0x1000 mm
2 x PIX Hawk with accesories
1 x Battery FUTABA 18MZ
1 x GPS Sensor + Logger OPTronics
2 x SWTU2 switch
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x Maleta transporte FUTABA 10PX
1 x Switch Cap L (silver)
1 x SE Ring 450 mm (2 pcs)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Neck strap Double V2
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 350 mm (2 pcs)
1 x BALSA triangular 15x15x1000 mm
1 x Balsa panel 6.0x100x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
1 x Yellow smoke canister 140 g
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Marker ties (20 pcs)
1 x Decorative caps, multicoloured
1 x Switch Cap M (red)
1 x Receiver bed (Blue)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Futaba S-Bus Rx/Gyro Link Lead
1 x Transmitter Balancer Futaba T-10CG
1 x Tape GFK 50 mm
2 x Switch Cap M (blue)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Contest-S-Pult-Carbon mc-20/mc-24
1 x Transmitter Balancer Futaba V
1 x Fixed launching hook
1 x Towing hook
1 x Support Filtro FESTO
1 x Oracover CHROME 2m
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Support XT60 conector (2 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Support FUEL DOT V3
1 x Angle support XT60 conector
1 x Recessed MPX connector support (6 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x PPM Encoder Module
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x PT 21x13 EL Propeller 3 Blade
1 x PT 16x10 E Propeller
1 x Switch moment button, 2 functions, long FUTABA
1 x Switch Cap M (silver)
1 x Micro Crystal RX 35.120 Ch 72
1 x Beech dowels 3.0 x 1000 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Transmitter Balancer SPK DX-8
1 x Wingstabi 9 DR M-Link Receiver
1 x Receptor FUTABA R7208SB FASSTest SBus2
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Plastic caps for AIR BURTS (30 pcs)
1 x Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Crystal Universal TX 35.140 Ch 74
1 x Aluminium ignition bad (blue)
1 x Crystal Universal RX 35.170 Ch 77
1 x Crystal Universal RX 35.070 Ch 67
1 x Pilatus PC-21 50E BLUE/WHITE (SebArt)
1 x 10 mm gas motor standoff
1 x OPTIC 8 opto Rx-servo insulation
1 x Crystal Universal RX 35.020 Ch 62
1 x R6106 HF 2,4 GHz receiver
1 x Receptor FUTABA R7006SB FASSTest/FASST
1 x Antena FUTABA R7108/7014/7114SB (1 pc)
1 x GPS V2 Sensor for M-LINK receivers
1 x Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver
1 x Ant. Cable R606/17/08/14FS L:1500mm
1 x Receiver R7008SB FASSTest
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
7,824.02EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies