Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Silicone red 6,0 qmm wire (25 m) temporarily out of stock	Connectors MPX 8 pins (green) 1 pair (male-female) temporarily out of stock	Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return temporarily out of stock
Epoxy L 40 min. 10 kg (Resin) temporarily out of stock	Silicone red 4,0 qmm wire (25 m) temporarily out of stock	XT-90 connector (pair) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Big Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
1 x	TX 250 mW especial GOPRO
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Motor A2212/13T
2 x	Junta humo metalica G35 DLE35
2 x	Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x	Spark motor OS nº 3
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	Horn 20x28,5 mm (2 pcs)
2 x	Anodized aluminium servo M3x16 screw (4 red pcs)
1 x	BALSA triangular 15x15x1000 mm
1 x	Angle of incidence meter
1 x	Balsa panel 8.0x100x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	BALSA leading edge 8x10x1000 mm
2 x	Aluminium cap bolt washer M3 blue (8 pcs)
2 x	Horn 5/20 with M2 Bearing
1 x	Blind nut M2 (10 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	250 mm / 16 mm Airbrakes
1 x	Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs)
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	140 mm rods set for direction control
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Blind nut M3 (4 pcs)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Brass control horn M4 short for wire (10pcs)
1 x	45 mm rods set for direction control
1 x	Blind nut M5 (4 pcs)
2 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Balsa panel 10x100x1000 mm
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	28x5 mm wires output (2 pcs)
1 x	Allen wheel collar M3x3
1 x	90 mm rods + T patellas set for direction control
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	15 mm floating pad (30 pcs)
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	3,0x60 mm allen screwdriver
1 x	Universal Colour Paste deep black 250 g
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	2,5x60 mm allen screwdriver
1 x	Stickers-digit for marking
1 x	O-ring Saito FG-73 5cyl
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	Tygon tube 7.94 x 4.7 mm 15 m
1 x	Tubo silicona transparente 3.5 x 2 mm (1m)
1 x	Tank gas KUZA 500 cc
1 x	Tygon tube 4.8 x 3.2 mm 15 m
1 x	PT 20x13 EL Propeller
1 x	FESTO connector M7 barb fitting 4mm
1 x	Distanzstück motor OS 120 AX
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x	Giant Scale Muffler D.A. 70
1 x	Pitts Muffler kit for CAP 21
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180
1 x	Refueling Cap V3 (RED)
1 x	Simple take for fuel tank
1 x	Quick hose connector 4-3 mm
1 x	Refueling Cup V2 Blue
1 x	Tube mounting clips (5 pcs)
1 x	Quick hose connector 6-6 mm
1 x	Pendulum glow tank
1 x	Tygon tube 4.8 x 3.2 mm 1m
1 x	Refueling Cup V2 Red
1 x	Refueling kit for Cap "Red"
1 x	Refueling Cap V3 Red
1 x	Refueling Cap V3 Black
1 x	T- Fittings red color (2pcs)
1 x	QS Bulkhead Valve 4/4 mm
1 x	Tygon tube 9.53 x 6.35 mm 15 m
1 x	T-Hose connector 4-4-4mm
1 x	Tygon DUBRO Medium 15m
1 x	Tank gas KUZA 260 cc
1 x	T-Hose connector 3-3-3 mm
1 x	Quick hose connector 3-3 mm
1 x	Tube holder
1 x	Support 45% Hopper JetsMunt
1 x	Tygon tube 6.35 x 3.18 mm 15 m
1 x	Tubo espiral FESTO 6x1 Black
1 x	SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x	Restrictor FESTO 3/3 mm
1 x	PT 21x13 EL Propeller 3 Blade
2 x	PT 21x13 EL Propeller
1 x	PT 16x10 E Propeller
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	Socket head long ball link M3 (6 uds)
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Long ball link M3 (6 uds)
1 x	Joint with bearing M3 22x5,5
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Ball link M3 (6 uds)
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Long ball link M2 (6 uds)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Conector Servo female 4 pines
1 x	M3 Maxi ball link (2 uds)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	MPX Sub-D Adaptor
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	Connectors banna oro 3 mm (M/F)
1 x	Threaded insert M6 (10 pcs)
1 x	SyRen 50A 6V-30V Regenerative Motor Driver
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	PPM Encoder Module
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	30x14 prop Super Silence
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Cable control set
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	DPSI Micro MPS
1 x	20 mm carbon horn
2 x	Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs)
1 x	Servo-V-Limiter 5.2V
1 x	Screw M2x8 (10 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Interruptor FUTABA FX-MZ (2 Posic. corto)
1 x	Screw M3x20 (10 pcs)
1 x	Screw M4x20 (10 pcs)
1 x	Decorative caps, multicoloured
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Transmitter Balancer Futaba FF9-DX7-JR-Hitec
1 x	Servo M2x9/16 screw (4 pcs)
1 x	Screw M3x8(10 pcs)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Covered closure or fairings
1 x	Anntena Panel 5,8 GHz - 14 dBi
1 x	SyRen 10A 6V-24V Regenerative Motor Driver
1 x	PIX Hawk with accesories
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Clip fixing for wing (2 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	100 mm rods + T patellas set for direction control
1 x	Split M1,2x10 (10 pcs)
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Jeti Black cap
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Lite Plywood panel 600x300x2.0 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Sanyo RX Battery Eneloop 4,0 V AAA JR
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Beech dowels 3.0 x 1000 mm
1 x	Flap hinge (6 pcs)

10,030.93EUR