Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
2 x	Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Cierre cabina V1 M3 Azul (2 pcs)
2 x	Brazo direccional 12 mm Ø 3 mm ( 2 uds)
2 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Cierre cabina tipo FOX MDM1 4m (1 par)
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Cierre cabina 33/23.5mm (2 uds)
1 x	Abrazadera 4.6x203 (20 uds)
1 x	Varilla carbono 6.0 mmx1000 mm
1 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x	Casquillo para grimpar cable de 0,85 mm (10 pcs)
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x	Anclaje micro varilla mando Ø 1 mm prisionero/arandela (2 uds)
1 x	Extension silicona 30 cm macho (Futaba)
2 x	Prolongador cable servo POWERBOX 50cm
2 x	Circlick seguridad
1 x	Prolongador Futaba 100 cm Ø 0,35 mm
1 x	Prolongador S-Bus 1-2 silicona 120 cm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	Extension silicona 30 cm hembra (Graupner)
2 x	Prolongador servo 20 cm HITEC/JR
3 x	Cable S.BUS 3 salidas 100 mm
2 x	Prolongador cable servo POWERBOX 100cm
1 x	Canal de ABS de 2,0x4,0x1000 mm
1 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
1 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Perfil Acero Inox. 14.5x9.6x1000 mm
2 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil de ABS "T" 10.0x10.0x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
2 x	Perfil de ABS "T" 6.0x6.0x1000 mm
1 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
1 x	Perfil Acero Inox. 15.5x8.5x1000 mm
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Perfil Acero Inox. 19.5x9.8x1000 mm
1 x	Perfil de ABS "L" 10,0x10,0x1000 mm
1 x	Perfil de ABS "L" 5,0x5,0x1000 mm
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Perfil Acero Inox. 11.5x6.5x1000 mm
1 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Perfil Acero Inox. 10.5x5.7x1000 mm
1 x	Canal de ABS de 5,0x10,0x1000 mm
1 x	Perfil Acero Inox. 7.5x4.5x1000 mm
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil de ABS "T" 8.0x8.0x1000 mm
1 x	Crimpadora
1 x	Bomba de vacio 12 CFM completa
1 x	Alicate para "Ball-Link"
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
1 x	Interface Realflight Simulator
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
1 x	Bascula precision 0.1-2000 g
1 x	Arrancador EM Gear Power 250
1 x	Destornillador Allen 1.27 mm
3 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
2 x	Alicate para hacer "Z"
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Copiador 5 unidades de 20 cm
2 x	Arrancador 12v (Max 180 and 30ccm)
1 x	Arrancador 12v (Max 90 and 15ccm)
1 x	Arrancador Sullivan-STAR 603 DINATRON
1 x	Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x	Destornillador allen 3,0x60 mm molibdeno
1 x	GameCommander USB Universal
1 x	Destornillador Allen 1.5 mm
1 x	SIMtransmitter 6 Modo 2
1 x	Piloto 1/10 "Jimmy"
1 x	Piloto 1/12 "Fighter"
1 x	MYLAR film A350 (1000x500 mm)
1 x	Listón de PINO 2,0x10,0x1000 mm
1 x	Hélice CAM-Carb-Light 13x6" (Hélice derecha)
1 x	Varilla ABS 5,0x1000 mm
2 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Modulo telemetria 500 mW/100 mw Radio aire/Tierra Modulo 915 MHz
1 x	Herramienta para desmontar kwik link
1 x	Guante Latex GRIP Talla L
2 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Molde conector XT-90
1 x	Cierre/Anclaje Ala M6 Rojo (2 pcs)
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Protector punta ala 38x10x12 (2 pcs)
1 x	Cable acero trenzado Ø 0,62 mm (10 m)
1 x	Varilla carbono 8.0 mmx1000 mm
1 x	Protector punta ala 30x10 (2 pcs)
1 x	Desdoblador de mando 3mm (2 pcs)
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
1 x	Goma cierre cabinas 5m
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono 10 mm x 1000 mm
1 x	Varilla carbono 4.0 mmx1000 mm
1 x	Varilla carbono 3.0 mm x 1000 mm
1 x	Brazo direccional 12 mm Ø 4 mm
1 x	Prolongador servo 15cm MULTIPLEX
1 x	Bujía 1/4-32 EVO 10GX
1 x	Codo escape para SAITO FA65/72/80/82a/91S/100/
1 x	Cable silicona "Y" 30 cm (Futaba)
1 x	Brazo servo FUTABA long (8 pcs) DUBRO
1 x	Prolongador 30 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Set piñones servo HITEC HS-85
1 x	Tapa de servo estándar 90x75 mm
1 x	Bujía 1/4-32
1 x	Servo TOPMODEL S7520 MG
1 x	Prolongador 15 cm (Futaba)
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Cable "Y" 15 cm
2 x	Bujía NGK CM6
1 x	Escape O-ring Saito FG-73 5cyl
1 x	Brazo servo metal 15.5mm MKS
1 x	Set piñones servo HITEC HS-81
1 x	Prolongador silicona 100 cm (Graupner)
3 x	Programador HPP-21 PLUS HITEC digital servos PC
2 x	Bujía motor OS nº 8
1 x	Prolongador PVC 150 cm (Graupner)
1 x	Servo MKS HV1220
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
2 x	Programador HPP-25 PLUS HITEC digital servos Campo de Vuelo
1 x	Brazo servo aluminio 15-10 mm HITEC
1 x	Clips scape Ø25 mm
1 x	Servo HITEC D951 TW
1 x	Extension silicona 35 cm macho (Futaba)
1 x	Bancada servo ala 11 mm
1 x	Servo TOPMODEL DS9010 T
1 x	Cable silicona "Y" 30 cm (Graupner)
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Servo MKS HV6150 "anclaje horizontal"
1 x	Prolongador cable servo POWERBOX 75cm
1 x	Prolongador 90 cm (Futaba)
1 x	Servo TOPMODEL STANDARD S3217
2 x	Tapa de servo micro-mini 50x45 mm
1 x	Prolongador cable servo 0,14 PVC, conector ZH micro
1 x	Set piñones servo HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-311
1 x	Perfil goma 6-2 mm 2M
1 x	Chispometro con cargador
2 x	Rueda de acero Proxxon/Dremmel 2,35 mm
1 x	Pasta soldar 100g
2 x	Mini termometro infrarrojos
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Tacometro HANGAR 9 digital
1 x	Funda plancha entelar STD
2 x	Tacometro Hyperion Multi-pala
1 x	Alicate para hacer "Z"
2 x	Set brocas PROXXON 0.5-3.2mm (10 pcs)
2 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Perfil de ABS "L" 4,0x4,0x1000 mm
1 x	Acumulador polvo para limpieza moldes
1 x	Perforador hélices 5/6,3/8/9
2 x	Pistola termica MH 550 micro
1 x	Biberon 500 ccm Glow
1 x	Futaba CGY760R - Gyro+Receiver+Governor con Progm. GPB-1
1 x	Bayoneta aluminio/strongal D25 mm/1 m
1 x	Bayoneta aluminio/strongal D35 mm/1 m
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 3,0 mm
1 x	Pincel laminar 10 mm (50 pcs)
1 x	Cono Aluminio hélice fija 40 mm diámetro / eje 3,0 mm
2 x	Plancha para entelar
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Prisionero aluminio 3 mm Ø (4 uds)
1 x	Prisionero aluminio 4 mm Ø (4 uds)
1 x	Conector FESTO 4-3mm
1 x	Oracover Gris Seafire Sea 2m
1 x	Oracover CHROME 2m
1 x	Juego de hélices 5x3 Multicopter (2cw+2ccw)
1 x	Brazo servo doble aluminio V3-Hitec 3,5" azul
1 x	Servo HITEC HS-325 BB
1 x	Servo HITEC D941 TW
2 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	Pegatinas Cierva C30 versión española
1 x	Hub corona pre-rotación LA500
1 x	Motor rotor LA-500
1 x	Tijeras curvas 16cm - GFK/CFK/Aramid
2 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
2 x	Roller cutter 28 mm, cuchilla recambio (2 pcs)
1 x	Interface Jack Adapter IKARUS
1 x	Perforador hélices DA-85/100/120/150/200 y VM 60-210
1 x	Mini-clip
1 x	Filtro para bomba vacio
1 x	Cono Aluminio hélice fija 30 mm diámetro / eje 2,3 mm
1 x	Cono NUT M5
1 x	Conexión de vacío VA 1 (para manguera Ø 6 mm)
1 x	Plancha entelar Std
2 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Cono NUT M8x1,25
1 x	Arrancador EM Gear Power 80
2 x	Pincel Gr.5
1 x	Dogdrive props 12 mm
1 x	Prisionero aluminio 2 mm Ø (4 uds)
1 x	Ball link ALU M3/2 con rodamiento (1 pcs)
1 x	Adaptador 4,0 mm M6 para cono 30 mm hélice pleg.
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Adaptador 3,0 mm M6 para cono 40 mm hélice fija.
1 x	Adaptador 5,0 mm M8 para cono 40 mm hélice pleg.
1 x	Abrazadera para tubo de teflón Ø29 mm ext (1 pcs)
1 x	Tapa de servo mini 65 mm
1 x	Conector FESTO G1/8 Quick 4mm 90º
1 x	Tapa de servo micro-mini 57 mm
1 x	Oracover Negro 10 m
1 x	Cono NUT M6
1 x	Gafas FPV Eachine EV800D
1 x	Servo HITEC D131 MW nano
1 x	Pipa bujía DLE-111
1 x	Palas de autogiro de 330 mm
1 x	Servo BMS-4112
1 x	Bujía DLE CM6
1 x	Brazo servo aluminio HITEC HS-125MG/5125MG
1 x	Servo HITEC HS-125 MG
1 x	Servo HITEC HS-56 BB
1 x	Bujía motor OS nº 3
1 x	Prolongador silicona 10 cm (Graupner)
1 x	Rodamiento 3x8x4
1 x	Conector ABS "L" 1.5 mm x 1000 mm
1 x	Soporte del rodamiento frontal LA500
1 x	Eje de la cabeza rotora LA500
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Plastilina para moldeado (1 Kg)
1 x	Hoja sierra 65mm 160 Dientes para OZI/E
1 x	Hoja sierra 65mm Diamond para OZI/E
2 x	Receptor GRAUPNER GR-24 HoTT
1 x	Receptor GRAUPNER GR-16 HoTT
1 x	Hoja sierra 8 mm OZI220E
1 x	Plancha para entelar mini
1 x	Cristal Universal RX 35.120 Ch 72

7,462.41EUR