Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

28x12 BIELA propeller (3-blades)
145.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	CC 05
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Circlick securite
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	5 LiPo XH>EH adapter
1 x	CM-3
1 x	Double conector with JR adapter and 200 mm extension
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabling for Fox MDM1 wings
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Connector CAN 15
1 x	30 cm BEC cable (female)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Connector Sub-D 2+5 Female
1 x	Connector Sub-D 2+5 Male
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	UBEC 6A KAVAN
2 x	Yellow smoke canister 65 g
1 x	B4-0 rocket charges (6 pcs)
2 x	"S" set for planes
2 x	White smoke canister 140 g
1 x	Blue smoke canister 140 g
1 x	Initior Receiver FRX2 Wireless
2 x	White smoke canister 100 g
1 x	"M" set
2 x	Red smoke canister 100 g
1 x	Smoke set "M"
2 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	Smoke set "S"
2 x	Electric rocket starters (6 pcs)
2 x	Ventral support for AX-18/AX-60
1 x	Yellow smoke canister 100 g
1 x	"S" set for boats
1 x	White smoke canister 65 g
1 x	Black smoke bombs AX-60 (5 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Hot Glue Stick RED
1 x	1/7 Pilot "Japanese"
1 x	Horn for flap control (1 pcs)
1 x	CC 02
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	USBCOM 5i
2 x	PCARD Wireless System
1 x	3l Smoke oil
2 x	White smoke bombs AX-18 (5 pcs)
2 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	Green smoke canister 100 g
1 x	Green smoke canister 140 g
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Optotronix Aurora Plug
1 x	EWC6 40 cm wing connector
1 x	Xplorer3 anemometro
1 x	Xplorer1 anemometro
1 x	Blind nut M6 (4 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Rubber bushing with bracket "A" type (2 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Turnbuckle M1,6x17/27 (2pcs)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Long ball link M2 (6 uds)
1 x	20 mm gas motor standoff
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Battery EMCOTEC LiIon 3000 7.2v
1 x	Magnetic Connect locking system
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	MPX-Dean "T" Adapter
1 x	Extension for SensorSwitch 60cm
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Circlik for shaft 3.2 mm (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	M3 black washers (4 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
2 x	45 mm rods + T patellas set for direction control
1 x	Allen wheel collar M3x3
1 x	Allen wheel collar M4x6
1 x	Cable grommet Ø 3.2 mm (4 uds)
2 x	Clip mini fixing for wing (2 pcs)
1 x	Propeller FIALA 15x8 3-Blade
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
3 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Allen wheel collar M3x5
2 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	140 mm rods set for direction control
2 x	80 mm rods set for direction control
1 x	28x5 mm wires output (2 pcs)
2 x	Clip fixing for wing (2 pcs)
1 x	Allen wheel collar M4x4
1 x	90 mm rods + T patellas set for direction control
2 x	100 mm rods set for direction control
1 x	11 mm Rubber pads (14 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Canopy Latch
2 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Cable grommet 9.5 mm (4 uds)
2 x	Cable grommet Ø 6.4 mm (4 uds)
2 x	140 mm rods + T patellas set for direction control
1 x	Parachute expulsion foam
1 x	Rocket D9-7
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Blue smoke canister 100 g
1 x	Red smoke canister 140 g
2 x	AX-60 starters (5 pcs)
1 x	USB Interface Adapter
1 x	Threaded coupler M2,5 (10 pcs)
1 x	Wire easy tensioner (silver)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	wire tensioner (blue)
1 x	wire tensioner (black)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Oratex Natural White 2m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Threaded coupler M2 (10 uds)
1 x	Threaded coupler M2 (10 pcs)
1 x	Small kwik link (10 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	wire tensioner (red)
1 x	wire tensioner (silver)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Round Rod 1.0x3.5 cm
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Oracover light Grey 2m
1 x	Oracover Black 10 m
1 x	Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg
1 x	Servo KST A15-1810 20kg/cm@8.4V / Coreless Motor
1 x	Soporte servo KST X08/H and Plus
1 x	Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x	Xplorer4 anemometro
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	100 mm rods + T patellas set for direction control
1 x	Screw M2x6 (10 pcs)
1 x	Screw KB 1.4x6 mm (10 pcs)
1 x	Landing gear frontal support 25x32x16
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Pan head screw M2x16 PH
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Cockpit plastic closing
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Cockpit metalic closing
1 x	Snap long M2 (10 uds)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Screw M2.5x8 (10 pcs)
1 x	45 mm rods set for direction control

4,167.28EUR