Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB210

258.00EUR

DUPLEX 2.4EX Central Box 210
[JETCB210]

JETI Duplex 2.4EX Central Box 210
Product description and features
The Central Box 210 is the successor to the popular Central Box 200. Especially for the use of powerful and power-hungry servos, the Central Box 210 uses an aluminum housing and avoids the over current protection of the servo slots. The Central Box 210 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 210 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.
Compatibility with Futaba
The Central Box 210 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off The switching on and off process of the Central Box 210 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.
Features
Configurable servo outputs
Battery connections 2x MPX connector system
Robust aluminum housing for extra cooling and protection
Firmware upgradeable via JETI USB adapter and JETI Studio
Wireless programming via the device overview of the DC/DS transmitters
Up to 3 independent receiver inputs (R1, R2, E1/R3)
Up to 15 servo slots (suitable for DITEX servo telemetry)
Up to 3 telemetry sensor inputs (E1/R3, E2/15, E3/14)
Input for supplied magnetic switch or optional RC switch
Optional over current protection
The Central Box 210 is not equipped with the built-in overload protection of the servo slots. To protect critical servos such tow coupling servos, retractable landing gears or spoiler servos, the optional overload protection DPSI OCP (Accessories tab) can be used.
Feature
Servo outputs 15
Protected servo outputs (for servos with up to 30kg/cm)
Protected servo outputs (for servos with up to 30kg/cm)
Receiver inputs up to 3
Satellite receiver support Yes
Telemetry Yes
DITEX servo telemetry Yes
Battery inputs 2
Supply voltage [V] 4 up to 8.4
Voltage regulator No
Permanent current [A] 20
Peak current (approx. 2 seconds) [A] 90
Idle current [µA] 180
Operating temperature [°C] ([°F]) -20 to 75 (-4 to 167)
Dimensions [mm] ([in]) 66 x 42 x 18 (2.6 x 1.65 x 0.71)
Weight [g] ([oz]) 59 (2.08)

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 04
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Universal Colour Paste white 50 g
1 x	Partall paste 650 g
1 x	800TVL CMOS camera for FPV
1 x	Oracover Orange 2 m
1 x	Steering arm 12 mm Ø 4 mm
1 x	Oracover light Grey 2m
1 x	Oratex Natural White 2m
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Orange
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Profile ABS Square 4 x 1000 mm
1 x	Vacuum pump 12 CFM
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Adapter 3,0 mm M6
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	1/10 Pilot "Jimmy"
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Horn 6/27 with M3 Bearing
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x
1 x	1/12 Pilot "Tom"
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Ball link M2 (10 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	1,5x50 mm allen screwdriver
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Extension 90 cm (Futaba)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	18 mm reinforced hinge
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Paint gun for sprays
1 x	Spray adhesive AEROFIX 2
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Painting GHT Lexan Black 150 ml
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Oracover Black 2 m
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oratex Red Fokker 10 m
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	DYNAMOMETER S-1580
1 x	Oratex White 2m
1 x	Oratex Yellow Cub 10 m
1 x	Canopy Latch
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Joint with bearing M2,5 22x5,5
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Horn with ball 40x30
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Adjustable brass horn threaded M3
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Horn for flap control (1 pcs)
1 x	Round Rod 1,0x1000 mm
1 x	Control horn long w/ball
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Horn 5/15 with M2 Bearing
1 x	Adapter 4,0 mm M8
2 x	Horn 13,5x16 mm (2 pcs)
2 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Rubber profile 8-2 mm 2M
1 x	Screwdriver for Torx® TX8
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Adapter lead MPX/XT60
1 x	Extension silicon 30 cm male (Graupner)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Gates hinge
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Long pinned hinge (12 uds)
1 x	Extension 100 cm (Futaba)
1 x	SE Ring 350 mm (2 pcs)
1 x	BALSA triangular 8x8x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	SE Ring 330 mm (4 pcs)
1 x	Cinta Goldfix 1m
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	SE Ring 360 mm (2 pcs)
1 x
1 x	SE Ring 200 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Jeti Black cap
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	BALSA leading edge 8x10x1000 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	20 g tin paste
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Tape GFK 50 mm
1 x	Hobbylite Filler, Balsa colour
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Oracover Yellow CUB 2 m
1 x	Oratex Natural White 20m
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Oracover Green10 m
1 x	Cockpit plastic closing
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Oracover Verde 2 m
1 x	Covered closure or fairings
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Oracover Yellow CADMIO 10 m
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Oracover White 10 m
1 x	Oracover ROYAL RED 2m
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oracover Yellow CUB 10 m
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	ORACOVER Ferrari red (2 m)
1 x	Oracover Azul 2 m
1 x	Oracover Red 2 m
1 x	One touch canopy lock
1 x	Optical RPM Sensor
1 x	Oracover GREY Seafire Sea 2m
1 x	Steering arm 16 mm Ø 3 mm
1 x	Oracover Azul Cielo 2 m
1 x	Oracover Brown 2 m
1 x	Lock washer 2.7 mm (20 pcs)
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Slave-cable USB Easy Sim
1 x	Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Horn 6/35 with M3 Bearing
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Digital scale up to 40 kg
1 x	Round Rod 3,0x1000 mm
1 x	Dust collector for mould cleaning
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	1/7 Pilot "Japanese"
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Round Rod 4,0x1000 mm
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Ball link M3 (6 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	ABS tube 5.0x4.0x156 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	3 mm Short Prop Adapter M5
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Couple M4 for wire (10 pcs)
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Starter Sullivan-STAR 601
1 x	Vacuum pump P1-N
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Threaded coupler M2 (10 uds)
1 x	Round Rod 1,25x1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	1/6 Pilot "Garry"
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Threaded coupler M3 (10 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Pilot "Anthony" (Slimline)
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	20 mm carbon horn
1 x	ABS tube 2.0x1.0x1000 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Buy Perforated film 100 cm / 10 m
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm M3 variable horn
1 x	Strip 1,5x1,5x330 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	SIMtransmitter 6 Mode 2
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	PIX Hawk with accesories
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Interface Realflight Simulator
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Horn mando long (2 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	ABS I Strip 20x10x1000 mm
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Joint with bearing M3 22x5,5
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	2 mm Prop Adapter M5
1 x	Hot Glue Stick BLACK
1 x	1/4 Pilot "Heidi"
1 x	Cable coupler M3 (10 uds)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	1/4 Pilot "Mike"
1 x	Ball link M3 (10 pcs, flat ball)
1 x	6 mm M3 variable inclined horn
1 x	Quicklock washer 2.5 mm (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Adapter 3,2 mm M8
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	1/10 Pilot "Jack"
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Adapter 5,0 mm M8
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Cable coupler M2 (10 uds)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Ball link M3 RPA's-UAV's
1 x	Z Bender - S Type Tool
1 x	1/6 Pilot "Buddy"
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Angled clevis with threaded rod M3
1 x	Cable coupler M3 (10 uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Black large kwik link (10 pcs)
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	ABS tube 18.0x16.0x1000 mm
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Horn 5/10 with M2 Bearing
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Hot Glue Stick RED
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	1/6 Pilot "Tony"
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Horn 5/20 with M2 Bearing
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Pilot "Duke" Legends Series (Slimline)
1 x	1/12 Pilot "Cougar"
1 x	Profile ABS half cane 6.0x1000 mm
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Extension lead 15 cm Multiplex
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Connector Sub-D 2+5 Male
1 x	Medium pin type hinge (12 uds)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	CM-3
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Cabel "Y" 15 cm
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Premium servo extension 100cm
1 x	Landing gear axle 4x21 4 mm (2 uds)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	Brass rod Ø 0.8 mm x 1000 mm

9,658.97EUR