Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Universal Colour Paste white 50 g
1 x	Partall paste 650 g
1 x	800TVL CMOS camera for FPV
1 x	Oracover Orange 2 m
1 x	Steering arm 12 mm Ø 4 mm
1 x	Oracover light Grey 2m
1 x	Oratex Natural White 2m
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Orange
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Profile ABS Square 4 x 1000 mm
1 x	Vacuum pump 12 CFM
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Adapter 3,0 mm M6
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	1/10 Pilot "Jimmy"
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Horn 6/27 with M3 Bearing
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x
1 x	1/12 Pilot "Tom"
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Ball link M2 (10 pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	1,5x50 mm allen screwdriver
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Extension 90 cm (Futaba)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	18 mm reinforced hinge
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Paint gun for sprays
1 x	Spray adhesive AEROFIX 2
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Painting GHT Lexan Black 150 ml
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Oracover Black 2 m
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Oratex Red Fokker 10 m
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	DYNAMOMETER S-1580
1 x	Oratex White 2m
1 x	Oratex Yellow Cub 10 m
1 x	Canopy Latch
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Joint with bearing M2,5 22x5,5
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Horn with ball 40x30
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Adjustable brass horn threaded M3
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Horn for flap control (1 pcs)
1 x	Round Rod 1,0x1000 mm
1 x	Control horn long w/ball
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Horn 5/15 with M2 Bearing
1 x	Adapter 4,0 mm M8
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Rubber profile 8-2 mm 2M
1 x	Screwdriver for Torx® TX8
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Adapter lead MPX/XT60
1 x	Extension silicon 30 cm male (Graupner)
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Extension silicon 30 cm female (Futaba)
1 x	Gates hinge
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Long pinned hinge (12 uds)
1 x	Extension 100 cm (Futaba)
1 x	SE Ring 350 mm (2 pcs)
1 x	BALSA triangular 8x8x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	SE Ring 330 mm (4 pcs)
1 x	Cinta Goldfix 1m
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	SE Ring 360 mm (2 pcs)
1 x
1 x	SE Ring 200 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Jeti Black cap
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna

4,387.72EUR