Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock
Propeller MENZ-S 18x12 temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
3 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
2 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	30 cm BEC cable (male)
2 x	30 cm BEC cable (female)
2 x	Adapter lead MPX/EC3
1 x	CC 05
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Interface Jack Adapter IKARUS
1 x	SIMtransmitter 6 Mode 2
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Bec MR UBEC 5A (5v/6v/7v)
2 x	Slave-cable USB Easy Sim
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	4 LiPo XH>EH adapter
1 x	Adapter lead MPX/XT60
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - JST-EH 4/5S Adapter
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	EasyFLY Addon
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	2 LiPo XH>EH adapter
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	CC 02
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Circlick securite
1 x	Dean "T" - Futaba Adapter
1 x	MPX-Dean "T" Adapter
1 x	Digital scale up to 40 kg
1 x	Motor DLE 170 M- Paramotors
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	Hot Glue Stick RED
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball Link Plier
1 x	Vacuum pump 12 CFM
1 x	2,0x50 mm allen screwdriver
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x	Starter Sullivan-STAR 601
1 x	Screwdriver for Hexagon 1,27mm
1 x	Z Bender - S Type Tool
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Z Bender - S Type Tool
1 x	Screwdriver for Torx® TX6
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	Digital precision scale up to 2000 g
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Cut tube
1 x	Ball Link Plier
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x
3 x	Motor DLE 430 cc - Paramotors
1 x	Crimping tool
1 x	Copier 5x20 cm pcs
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	2,5x60 mm allen screwdriver
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Stickers-digit for marking
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Ply-Span 450x600/13g Orange
3 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
2 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Female connector JST SH 1.0mm with 10 cm wire
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	PSC 5
1 x	USB interface ALTIS
1 x	Vacuum pump P1-N
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Propadapter for motor A60-V2
1 x	Suction funnel for carburetor WALBRO 20-80cc (red)
1 x	SAITO FG-36 carburetor
1 x	Propeller diller for EME35 and DLE35
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Blocking screws M6 gas engine
1 x	DLA 116 crankshaft
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Silent-blocks DLE 170M
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 200cc Std
1 x	Small Crow DLE-170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Dust collector for mould cleaning
1 x
1 x	Precision wrench L100 mm
1 x	SERVO DES 588 BB MG
1 x	SSPS105 Super Hi-Power servo
1 x	SERVO DES 806 Pignons
1 x	Soporte metal para servos
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor)
1 x	SERVO DES 806 Pignons
1 x	Servo HBS 690BB HV Digital
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Crystal Universal RX 35.130 Ch 73
1 x	Servo NARO Max Std
1 x	Crystal Universal RX 35.120 Ch 72
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Pins M connect Multipin connectors AWG 20-24
1 x	Male connector for 12 pines AWG
1 x	Extension 5 lipos JST/C
1 x	Multi-adapter balancer JST - TP
1 x	Switc electronic 30 Amp
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	BEC 3A FOXY
1 x	Opto Gas Engine Kill Switch
1 x	3 LiPo XH>EH adapter
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Three-position switched channel, short
1 x	Female connector for 10 pines AWG

28,229.78EUR