Top » Catalog » Motors & Turbines » Explosion » Gasoline » OS Engines » OSGT154040

419.90EUR

OS GT15 W/E-4040 for airplane
[OSGT154040]

Aero gasoline engine with 14.95ccm power 2.37 horsepower at 15000o / min., Idle speed 2000rpm, engine weight 631g, exhaust weight 178g, ignition weight 95g designed for 2-cl. LiPo and Life operation.

O.S. The MAX GT15 gives pilots models designed for 10cc 2-stroke or 15cc 4-stroke glow engines all they need - reliability and durability, simple and inexpensive operation, easy adjustment, high efficiency and high performance. Designers O.S. MAX has given him more power and the ability to turn propellers of larger diameter than competing engines of this class, making it the No. 1 choice for pilots who are not satisfied with compromises!
The same built-in dimensions as the “glow” O.S. MAX 65AX.
New IG-06 electronic ignition with power from 4-5 cells NiCd / NiMH or 2S LiPo / LiFe.
Double needle carburetor type 61H with pressure regulator and fuel pump PD-08 for perfectly stable fuel delivery in all flight modes.
It uses an affordable blend of Natural Gasoline with two stroke oil blended at a ratio of 25-50: 1 (depending on oil type).
Economical operation - 200 ml tank is sufficient for 12-13 minutes of aerobatic flying with a reserve of 8-10 minutes at full throttle).
Expansion silencer E-4040 with effective sound attenuation allowing the exhaust outlet to be rotated in 90 ° increments
The noble deep sound of a two-stroke gasoline ideal for mock-ups and semi-scale models, the high performance and fast response needed for aerobatic models.
The GT15 is a two-stroke gasoline engine designed for aircraft models designed to drive 10cc 2-stroke or 15cc 4-stroke glow engines. It is equipped with a double needle carburetor type 61H with pressure regulator and fuel pump PD-08. The IG-06 electronic ignition and the E-4040 expansion muffler are also supplied as standard.

Propeller proportions: Run-in: 13x8 “, Sport / Aerobatic / Scale model: 13x8-11“ 14x8-10 “17x6“ 15x8 “
Recommended fuel: run-in 25: 1 (25 parts natural gasoline per 1 part KLOTZ oil), normal 50: 1 operation
The fuel tank (200-300 ml) and all hoses must be for gasoline.
Engine set includes:GT15 engine with RC carburetor 61H with pressure regulator and pump PD-08, IG-06 electronic ignition, spark plug CM-6, muffler E-4040, operating instruction manual.

Desplazamiento [ccm] 14,95
Número de cilindros 1
Calibre [mm] 27,7
Carrera [mm] 24,8
Velocidad de funcionamiento [rpm] 2000 - 15000
Potencia del motor (a 15000 rpm) [kW] 1,76
Potencia (a 15000 rpm) [HP] 2,4
Peso (motor) [g] 631
Peso (escape) [g] 178
Peso (encendido) [g] 95
Bujia recomendada CM-6
Volumen recomendado del tanque [ml] 200 - 300
Rosca de la tuerca de la hélice UNF 5 / 16-24

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Motor B40 9L + MAXON 4,4:1 Keramik
249.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	5 mm Prop Adapter M8
1 x	5 mm Prop Adapter M8
2 x	Prop Shaft Adapter 4 mm/M8 "long" 35 mm
2 x	5 mm Prop Adapter CN-Spinner
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	2,3 mm Prop Adapter M6
3 x	4 mm Prop Adapter CN-Spinner
2 x	2,3 mm Prop Adapter M6
2 x	3,2 mm Prop Adapter M6
2 x	3.17 mm Prop Adapter CN-Spinner
3 x	3 mm Prop Adapter M6
1 x	3.2 mm Prop Adapter M8
2 x	3,2 mm Prop Adapter M6
2 x	3.2 mm Prop Adapter M6
2 x	6 mm Prop Adapter M8
2 x	6 mm Prop Adapter M8
2 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
2 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 20.0x18.0x1000 mm
2 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	LOWER TOW HOOK
2 x	Cap Hispano Aviación
1 x	Softshell Hispano Aviación
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Partall paste 650 g
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	BALSA triangular 6x6x1000 mm
1 x	Strip 2,0x2,0x330 mm
1 x	1/4 Pilot "Heidi"
1 x	Conector FESTO M3 Quick 3mm 90º
3 x	Extension Arm for Carburetor (red)
1 x	Adapters for 7.5 - 35cc aircraft and naval engines
2 x	3 mm Prop Adapter M6
1 x	Recessed MPX connector support (6 pcs)
1 x	Secraft Fuel system v2, red color
1 x	LED lighting system High Power
1 x	LED blink wire flashing (blue - 2pcs)
1 x	LED wire (green - 2pcs)
1 x	SERVO HOLDER
1 x	NF-3m Heli Kit
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	Carbon plate 350x150x1.0 mm
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	4 mm Prop Adapter M8
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	Screwdriver for Hexagon 1,27mm
1 x	2,0x50 mm allen screwdriver
2 x	Tube Pitot to PIXHAWK
1 x	Shirt Hispano Aviación
2 x	Electric spoiler 440 mm (2 pcs)
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Tube mounting clamps
1 x	T-Hose connector 4-4-4mm
1 x	Refueling Cap V3 (RED)
1 x	4 mm Prop Adapter M6
2 x	Suction funnel for carburetor WALBRO 20-80cc (red)
2 x	Reed valve for DA 50-R
2 x	Hose clips 6 mm
2 x	Motor OS FS-62V 4T
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support FUEL DOT V3
1 x	Propeller APC 10x5 Electric Pusher
1 x	Tube holder
1 x	Tube mounting clips (5 pcs)
2 x	QS Bulkhead Valve 4/4 mm
1 x	Tubo espiral FESTO 6x1 Black
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	10 mm Prop Adapter M12
1 x	QS Bulkhead Valve 6/6 mm
1 x	Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180
1 x	4 mm Prop Adapter M8
2 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	2.3 mm Adapter for 30 mm spinners
1 x	T-Hose connector 3-3-3 mm
2 x	2 mm Prop Adapter M6
2 x	Tygon tube 7.94 x 4.7 mm 15 m
2 x	SINGLE FUELING VALVE GASOLINE MK2 SMALL
2 x	Tygon tube 9.53 x 6.35 mm 15 m
1 x	Support 45% Hopper JetsMunt
1 x	Quick hose connector 4-4 mm
1 x	T- Fittings red color (2pcs)
3 x	Extension Arm for Carburetor
1 x	Walbro carburetor for MVVS 26/30/35/40 cc
1 x	Refueling Cap V3 Red
1 x	Tank gas KUZA 260 cc
2 x	Tygon tube 4.8 x 3.2 mm 1m
2 x	SAITO FG-36 carburetor
1 x	T- Fittings blue color (2pcs)
2 x	Suction funnel for carburetor 90D-L (red)
1 x	Refueling Cap V3 Black
2 x	Suction funnel for carburetor 90D-M (red)
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	Motor OS FS 95 V 4T
1 x	OS Engine 105HZ-R Heli with pipe 105
1 x	500 ccm complete gasoline fuel tank
1 x	Motor OS 3820-1200 electric
1 x	Motor OS 15 LA
2 x	Motor OS MAX 120 AX
1 x	Joint with bearing M3 22x5,5
1 x	Captador OS GT 33 cc
3 x	Motor OS MAX 160 AX
1 x	OS 37 SZ-H, Carburetor Wharf OS 40, 60, FS70, 91S and 120SE
1 x	Carburador OS (Type 40K) 46AXII
1 x	Motor OS 55 AX
2 x	Motor OS 50 SX-Hyper
2 x	Motor OS 81 FS 4T
1 x	Motor OS FS 75 AX
1 x	OS Engine 105HZ-R Heli
2 x	OS 37 SZ-H, Crankshaft
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Support Filtro FESTO
1 x	DOMINO 46-55 Trainer 1583 mm
2 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	Aro pasacable Ø20 mm (4 pcs)
2 x	BULLIT Wing 1095 mm
1 x	SkyMaxx 1.550 mm (kit)
1 x	Tube support Ø 6mm (10 pcs)
1 x	Propeller APC 10x4.7 SF Pusher
1 x	Propeller APC 12x8 SF
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 11x10 Electric
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 11x8 Electric
1 x	Propeller APC 12x10 Electric
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	DLE 30 complete electronic ignition
1 x	PIX Hawk with accesories
1 x	PPM Encoder Module
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Towing hook
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Starter EM Gear Power 250
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	3 mm Long Prop Adapter M5
1 x	Propeller balancer
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Towing hook <3m
1 x	36 mm black plastic spinner for fixed propeller
1 x	Blue "FUEL VENT" round aluminum overflow socket
1 x	TYGON tubo 1 m Diam. 3.4 x 2.0 mm
1 x	OS GT15 W/E-4040 for airplane
1 x	Bujia OS G5 gasolina
1 x	TRAINER RC Pilot V2 90" w/r ARF
1 x	36 mm white plastic spinner for fixed propeller
1 x	45 mm white plastic spinner for fixed propeller
1 x	50 mm white plastic spinner for fixed propeller
1 x	40 mm white plastic spinner for fixed propeller
1 x	Spinner plastic red fixed propeller 30 mm
1 x	Tubo silicona transparente 3.5 x 2 mm (1m)
1 x	FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent)
2 x	45 mm black plastic spinner for fixed propeller
1 x	42 mm black plastic spinner for fixed propeller
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	Fuel line plugs (Red)
1 x	Fuel line plugs (Black)
1 x	Tygon tube 4.8 x 3.2 mm 15 m
1 x
1 x	Black "FUEL VENT" round aluminum overflow socket
1 x	Carbon plate 350x150x3.0 mm
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	EME 55 cc carburetor WALBRO
2 x	OS 37 SZ-H, Connecting rod
1 x	Motor OS 37 SZ-H

17,874.47EUR