Top » Catalog » Planes » Turbine » HISPANO AVIACION » BULL MØ1 2.6 » HABULLMo1R

3,950.00EUR

BULL MØ1 2.600mm RED
[HABULLMo1R]

BULL MØ1 2.600mm RED

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg

under request

Reviews

Categories

* OFFER MONTH *
Planes->
  Aluminium
  Kits constructions
  Electric->
  Gasoline-Glow->
  Turbine->
    AEROFOAM
    BAJA Jets
    BOOMERANG RC-JETS
    GLIDET.IT
    GLOBAL JET CLUB
    GRUMANIA Jets
    HANGAR 9
    HISPANO AVIACION->
      BULL MØ1 2.6
      BULL MØ1 2.6 Accesorios
      ULTIMATUM 1.5 Accesorios
      ULTIMATUM 2.0
      ULTIMATUM 2.0 Accesories
      ULTIMATUM 3.0 Accesories
    JET-TENG MODELS
    JMB Jets Models
    PAF Modellbau
    PILOT RC
    RIPMAX->
    SEBART->
    SKYMASTER
    TopRCModel
  FPV
  VC
  Childrens line
  Aircraft Planes
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

22x12 Falcon electric
105.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	50N turbine start protection tube
3 x	Ring support P-20 OPUS V-Jet 60mm
1 x	Set transmisions BULL Mo1 (dura/aluminium)
1 x	HAWKER HUNTER 1:5,8 Desert (1.770mm)
2 x	BOEING 727, Jet pipe for Boeing 727
1 x	Tank GFK Opus/JEt 300 ml
2 x	Fuselage Bags JEEMO
1 x	SkyMaxx 1.550 mm (kit)
2 x	XICOY X45 rail
1 x	Set stickers JEEMO "Andy"
1 x	JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x	Copier 5x20 cm pcs
2 x	Ball link Aluminio M3 (2 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Long pinned hinge (12 uds)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Dust collector for mould cleaning
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	Round Rod 2,0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Glases Moritz
2 x	Horn 5/10 with M2 Bearing
1 x	Glases Aspen
1 x	Flat washer 2.7 mm (20 uds)pcs)
2 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x
1 x	Micro flex hinge (12 uds)
1 x	CC 05
1 x	Cable with accesories
1 x	Strip 2,5x1,25x330 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Flap hinge (6 pcs)
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	BALSA triangular 6x6x1000 mm
2 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Ferrita 17x10x6.5 mm
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Extra-long adjustable aluminium control horn 2,8x34
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Cabling for Fox MDM1 wings
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Horn 6/27 with M3 Bearing
1 x	3,0x60 mm allen screwdriver
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	BULL MØ1 2.600mm "RED BULL"
1 x	BULL MØ1 2.600mm "ALPINE"
1 x	Set transmisions ULTIMATUM 2.0 (stainless/aluminium)
1 x	Set Stickers Ultimatum 2.0 - Andy Folienwelt
2 x	Bags BULL Mo1 2.6m "Luxe"
1 x	ULTIMATUM 2.0 m red/black
1 x	Vest clothes Hispano Aviación
1 x	BULL MØ1 2.600mm YELLOW
1 x	ULTIMATUM 2.0 PRO "McLAren"
3 x	Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO
1 x	2 mm Prop Adapter M6
1 x	2.3 mm Adapter for 30 mm spinners
1 x	25 mm fenders (10 pcs)
1 x	10x7 tree blades propeller
1 x	3.2 mm Prop Adapter M6
1 x	Shirt Hispano Aviación
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Crimping tool
1 x	BALSA triangular 8x8x1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Horn 6/20 with M3 Bearing
1 x	6 mm M3 variable inclined horn
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Buy Perforated film 100 cm / 10 m
1 x	Connector Sub-D 2+5 Male
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
2 x	Glases Flitemaster
2 x	BALSA trip 3.0x5.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Round Rod 6,0x1000 mm
1 x	Quicklock washer 4 mm (10 pcs)
1 x	A/C quality beech plywood 600x300x1.5 mm
2 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	CC 02
2 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Angled clevis with threaded rod M3
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	ABS Strip 1.5x2.0x1000 mm
1 x	Buy Perforated film 100 cm / 50 m
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Dremel PERMAGRIT 18 mm round lime
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Adjustable brass horn threaded M3
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Balsa panel 3.0x100x1000 mm
1 x	Crimping tool
2 x	M3 black washers (4 pcs)
1 x	Vasa model Catapult
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Ball Link Plier
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	25 mm reinforced hinge
2 x	Balsa panel 4.0x100x1000 mm
1 x	4 LiPo XH>EH adapter
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Glases Nimbus "Black"
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	BULL MØ1 2.600mm RED
2 x	Canopy BULL MØ1 2.600mm
1 x	3,2 mm Prop Adapter M6
1 x	28 mm turnbuckle
1 x	290 mm M4/4 mm Prop shaft
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Horn mando long (2 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	JETImodel SINGLE BEC
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Spinner 3BL propeller pleg. 40 mm / 4,0 mm
1 x	Spinner 3BL propeller pleg. 65 mm / 4,0 mm
1 x	45 mm black plastic spinner for fixed propeller
1 x	50 mm black plastic spinner for fixed propeller
1 x	Boat 140 mm
1 x	Cabestrante 13 x12 mm (5 pcs)
1 x	Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück
1 x	Bisagra de remo metal 28 mm de largo (2 pcs)
1 x	ALU servo arm 90º 3 mm shaft
1 x	Servo JETI DSHV 3D13T (13 Kg)
1 x	Balsa panel 6.0x100x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Micro Switch button
1 x	Schul-Malpinsel Gr.5
1 x	PowerBox SparkSwitch RS
1 x	Round Rod 4,0x1000 mm
1 x	Glases Innovation Plus
1 x	Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr
1 x	Cable coupler M3 (10 uds)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x	Cable control set
1 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	Horn with ball 40x30
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn DU-BRO 1/2 (2 pcs)
2 x	42 mm white plastic spinner for fixed propeller
1 x	Spinner 3BL propeller pleg. 40 mm / 6,0 mm
1 x	Spinner 3BL propeller pleg. 42 mm / 4,0 mm
1 x	Cleat 15 mm (2 pcs)
1 x	Spinner 3BL propeller pleg. 65 mm / 4,0 mm
1 x	BOEING 727 kit
1 x	Spinner plastic black fixed propeller 30 mm
1 x	Capstan of plastic 125x72x45 mm
1 x	Klumpblock (Plastik), Höhe 8 mm, 1 Rille, 20 Stück
1 x	Cancamo con aro 16/6.5 mm (10 pcs)
1 x	Low line 74 mm
1 x	Capstan of plastic 91x44x45 mm
1 x	Cannon 12.7 cm (2 pcs)
1 x	Klumpblock (Plastik), Höhe 3 mm, 1 Rille, 20 Stück
1 x	Balsa panel 1.5x100x1000 mm
1 x	Switc electronic 30 Amp
1 x	Balsa panel 2.0x100x1000 mm
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Glases Nimbus
1 x	Kwik link unmount tool
1 x	MAX BEC 2
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	15 mm reinforced hinge
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	L-39 Albatros 138"/3.5m lenght ARF
1 x	Pin hinge 34x16 mm (10 uds)
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Small flex hinge (12 uds)
1 x	Round Rod 5,0x1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	45 mm white plastic spinner for fixed propeller
2 x	40 mm white plastic spinner for fixed propeller
1 x	Cleat 10 mm (2 pcs)
1 x	Klumpblock (Plastik), Höhe 6 mm, 2 Rille, 20 Stück
1 x	500 ml sealer (DOPE)
1 x	40 mm white plastic spinner for folding propeller
1 x	39,0 mm propeller (left propeller)
1 x	36 mm white plastic spinner for fixed propeller
1 x	6 mm Prop Adapter M8
1 x	42,0 mm propeller (rigth propeller)
1 x	50 mm white plastic spinner for fixed propeller
1 x	33,0 mm propeller (rigth propeller)
1 x	38 mm fenders (10 pcs)
1 x	36,0 mm propeller (rigth propeller)
1 x	Railing L250 mm (10 pcs)
1 x	36 mm black plastic spinner for fixed propeller
1 x	36 mm red plastic spinner for fixed propeller
1 x	4 mm Prop Adapter M6
1 x	33,0 mm propeller (left propeller)
1 x	4 mm Prop Adapter M8
1 x	50 mm white plastic spinner for folding propeller
1 x	39,0 mm propeller (rigth propeller)

47,047.68EUR