Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Cable servo PREMIUM 1 m (blanco/rojo/azul)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Cable servos PVC 0,25 mm2 Graupner (5 m)
1 x	Cable servo 4 lineas PVC 0,25 mm2 JR/Graupner (5 m)
1 x	Cable servo PREMIUM 100m (blanco/rojo/azul)
2 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
2 x	Cable silicona 0,25 mm² rojo (25 m)
1 x	Acoplador "Z" Ø 1.8 (2 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Acoplador "Z" Ø 1 (2 uds)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Acoplador para cable M4 (10 pcs)
2 x	Arrancador Sullivan-STAR 601
1 x	Arrancador EM Gear Power 250
2 x	Conector "T" 6-6-6 mm tubo bomba vacio
1 x	Bascula precision 0.1-2000 g
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Bascula precisión 0.1- 600 g
2 x	Crimpadora
1 x	Corta tubos aire
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
1 x	Bascular < 40 Kg
1 x	Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x	Destornillador allen 1,5x50 mm molibdeno
1 x	Destornillador Torx® TX6
1 x	Barra pegamento caliente Rojo
1 x	Crimpadora
2 x	Arrancador 12v (Max 90 and 15ccm)
1 x	Destornillador Allen 1.5 mm
2 x	Copiador 2 unidades de 20 cm
1 x	Acumulador polvo para limpieza moldes
1 x	Barra pegamento caliente Negro
1 x	Destornillador allen 2,0x50 mm molibdeno
1 x	Arrancador 12v (Max 180 and 30ccm)
1 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x	Destornillador Torx® TX8
1 x	Relleno balsa HobbyLite
1 x	Cera desmoldemante "Alta Temperatura" 340g
1 x	Antena Cloverleaf 5.8 GHz Tx - Rx
1 x	Anclaje cabina de soporte vertical "tipo F3A" (2 pcs)
1 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Cartucho de humo Amarillo 65 g
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Cable silicona 0,75 mm2 negro (25 m)
2 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x	Cable silicona 1,0 mm2 rojo (50 m)
2 x	Prolong. XH / XH 30 cm para 4 elem. cables silicona 0,25 mm2
1 x	Prolong. Macho XH 30 cm para 2 elem. cables silicona 0,25 mm2
1 x	Cable silicona 0,25 mm² blanco (25 m)
1 x	Cable silicona 0,5 mm2 rojo (1 m)
1 x	Cable silicona 0,5 mm2 amarillo (50 m)
1 x	Cable servo PVC 0,14 mm2 JR/Graupner (5 m)
1 x	Cable silicona 0,75 mm2 rojo (1 m)
1 x	Cable silicona 2,5 mm2 negro (25 m)
1 x	Cable silicona 1,5 mm2 rojo (1 m)
1 x	Prolong. XH / XH 30 cm para 6 elem. cables silicona 0,25 mm2
1 x	Soporte bomba Xicoy X45
1 x	Soporte grifo FESTO (2 pcs)
1 x	Varilla carbono 7.0 mmx1000 mm
1 x	Disipadores de calor para LEDs Optotronix
1 x	Soporte Antena 2.4 Ghz (2 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
2 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	Funda plancha entelar STD
1 x	Lima redonda PERMAGRIT 18 mm para Dremel
1 x	Funda plancha entelar PROF
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Goma arrancador KAVAN "soft"
1 x	Varilla ABS 5,0x1000 mm
1 x	Liston ABS 1,5x6,0x1000 mm
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Cable silicona 0,25 mm² verde (25 m)
1 x	Conector banana oro 4 mm
1 x	Tuerca autoempotrable M4 (4 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado lila (4 pcs)
1 x	Tuerca autoempotrable M5 (10 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado negro (4 pcs)
1 x	Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado azul (4 pcs
1 x	Tren aterrizaje Electrico ULTIMATUM 2.0 (Electron Retracs)
1 x	Tren aterrizaje Electrico AVANTI XS (Electron Retracs)
1 x	Molde conector MPX V1
1 x	Soporte soldadura universal aluminio
1 x	Perforador hélices DA-35/50/60/70
1 x	Perforador hélices para DLE111 y DA85-150
1 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Medidor ángulo palas helicóptero
1 x	Perforador hélices para DA50, DLE55 rojo
1 x	Mini termometro infrarrojos
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Molde conector Dean-T
1 x	Lima fina PERMAGRIT para Dremel
1 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Adaptador 5,0 mm M6 para cono 40 mm hélice fija.
1 x	Cable silicona 1,0 mm2 rojo (100 m)
1 x	Cable silicona 1,0 mm2 negro (100 m)
1 x	Cable silicona 0,75 mm2 rojo (25 m)
1 x	Prolong. Macho XH 30 cm para 5 elem. cables silicona 0,25 mm2
1 x	Soporte para cables S 6 mm (10 pcs)
1 x	Bateria LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	Bateria LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Círculo autoadhesivo 10 mm (72 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Tornillo M2x12 mm aluminio (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Tuerca autoempotrable M2 (10 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Tornillo Servos M4x5/8 aluminio anodizado lila (4 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Arandela conica ancha alumino M4 Oro (4 pcs)
1 x	Círculo autoadhesivo 12 mm (49 pcs)
1 x	Tuerca autoempotrable M3 (4 pcs)
1 x	Arandela conica alumino M4 azul (8 pcs)
1 x	Foco combo blanco/rojo
1 x	Resistencia 3W 5% OR47
1 x	ER-50eVo Set A [2x ER50 + RB-45]
1 x	Controlador frenos electricos
1 x	Condensador AddCAP 10AS
1 x	DSM 10 Dual Switch Mixer
1 x	DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x	Llave inglesa de precisión L100 mm
1 x	Tijera curva PREMIUM 16 cm
1 x	Tacometro Hyperion Multi-pala
1 x	Perforador helices DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-50/
1 x	Molde conector XT-30
1 x	Lija PERMAGRIT 45° 140x51 mm
1 x	Programador HPP-21 PLUS HITEC digital servos PC
1 x	Pistola termica MH 550 micro
1 x	Hoja sierra 65mm Diamond para OZI/E
1 x	Pincel laminar 10 mm (50 pcs)
1 x	Herramienta enrollador alambre (Kwik Twist Tool DU301)
1 x	Disco Corte Proxxon/Dremmel 22 mm
1 x	Set Perma-Grit "Fine" 7 piezas
1 x	Tijera electrica

5,875.64EUR