1,220.74EUR

Big-Malibu XL Roof box with surfboard rack GREY
[SLBMALIXXL30]

Big-Malibu XL Roof box with surfboard rack 285x90x44 cm. GREY

DESCRIPTION
Action: Direct from the manufacturer, including surfboard rack on the roof box.
It’s true that a roof box is not the most important thing for holiday planning.
However, it makes a holiday comfortable and safe. With this small description, we will try to sum up our over 25 years of experience. The no.1 for roof boxes made of fibreglass worldwide – leading through quality!
The Big-Malibu XL roof box is a modern and very stable fibreglass roof box (GRP) that is equipped with all the clever product characteristics. Ideal for surfing and other holidays: it is ideal for the transport of surf equipment, but also for ski equipment or other luggage.
The Big-Malibu XL is available in a sleek glossy white. For a small fee you can order the Big-Malibu XL in glossy black, glossy grey and glossy silver. Accessories: All Inclusive roof box.
Made of fibreglass. Exclusive roof box. Only from Mobila. This roof box has no recesses for the carrying inserts. The minimum distance of the rear attachment to the end of the roof box is 78 cm. The provided installation area between the roof beams is 61-120 cm. However, it can easily be extended to its full length, as the bottom portion is specifically reinforced. The roof box automatically opens from behind upwards, and can easily be loaded from the back and sides. This is the only safe way to be on the road at high speeds!
It has two front screwed NIROSTA stainless steel hinges, inside two pneumatic springs, and at the rear three clamps made from NIROSTA stainless steel to prevent sudden opening of the box. Unrivalled theft protection is thereby automatically integrated.
Big-Malibu XL ca. 1100 l
This big roof box is ideal for surfers, whose equipment includes 4-5 masts (length <280 cm), 3-4 boom and 7-10 sails or 1-2 Boards <280/81cm. There is also enough space for small items. The roof box is prepared to transport surfboards on the cover. Depending on the distribution of gravity, the pneumatic springs will automatically lift surfboards of up to 20 kg.
Example Big-Malibu XL
The surfboard rack can be removed
Manufactured from fibreglass
Nirosta stainless steel fittings included
Nirosta stainless steel mounting kit included
Nirosta stainless steel T-stones are possible*
Glossy nano-coating and sealing included
Completely UV resistant
Roof box is lockable
2 strong pneumatic springs
Aerodynamic, torsion-resistant
Suitable for all vehicles and vehicle systems
Variable mounting (smooth base)
Dimensions: approx. 285 x 90 x 44 cm (maximum internal length is approx. 280 cm)
Only 28 kg Weight
130 kg carrying capacity

under request

Reviews

Customers who bought this product also purchased

Fuel tank fiberglass Easy Jet 2,2 l under request	Servo HITEC HSB-9380TH under request	Straightened rod Ø 2.0 mm x 1000 mm under request
Extra hard 1500 ccm complete gasoline fuel tank under request	Gas or Kerosene Refueling Dry-Break Ports w/Return Line under request	Straightened rod Ø 0.5 mm x 1000 mm under request

Quick Find

Shopping Cart

1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Extension silicon 10 cm (Futaba)
1 x	Cabel "Y" 30 cm (graupner)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	2,5x60 mm allen screwdriver
1 x	Cotton Flocks, bag/ 7 Kg
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x	Starter 12v (Max 180 and 30ccm)
1 x	Flat washer 4.3 mm (20 pcs)
2 x	Profile ABS Square 4 x 1000 mm
1 x	Angled clevis with threaded rod M3
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x	ABS angle 3,0x3,0x1000 mm
2 x	Cross Connector 4.0 mm x 1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Couple M4 for wire (10 pcs)
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Cable Cargador FUTABA
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	M2 5Diam black ball link V2 (2 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Socket head long ball link M3 (2 uds)
2 x	Hardener Aero EPH 161 (250 g)
2 x	Joint with bearing M2 22x5,5
1 x	Joint with bearing M3 22x5,5
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Long ball link M1.6 (6 uds)
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
2 x	Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
2 x	Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
2 x	resin-hardener package L-385 with hardener H-385
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	3 blades set
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Pull-Pull complet set with CF rudder double servo arm
2 x	ABS "T" angle 6.0x6.0x1000 mm
2 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
2 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Mudguard wheels 112/127 mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	Red 4 mm connector holder
1 x	XH female balance (6S) connector (2 pcs)
1 x	XH male balance (4S) connector (2 pcs)
1 x	XH male balance (6S) connector (2 pcs)
1 x	XH male balance (7S) connector (2 pcs)
1 x	XH male balance (9S) connector (2 pcs)
1 x	XT60 Connector with Holder Male 2pcs
1 x	800TVL CMOS camera for FPV
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Cable coupler M3 (10 uds)
1 x	wire tensioner (black)
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Cable coupler M2x66 (2 uds)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	wire tensioner (silver)
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Pulley brass 2,5/1 (2 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Xplorer3 anemometro
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Hot Glue Stick GREEN
1 x	ABS angle 2,0x2,0x1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Xplorer2 anemometro
1 x	L-Connector 1.5 mm x 1000 mm
2 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Z Bender - S Type Tool
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Dust collector for mould cleaning
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Ball Link Plier
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Oils Pumps Empty (1 liter)
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Oil FUCHS 1 liter
1 x	AC-10 pre-rotacion with motor
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Hot Glue Stick BLACK
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Starter 12v (Max 90 and 15ccm)
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Set freno para ruedas Dia. 127 mm
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	XH female balance (2S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	XH male balance (2S) connector (2 pcs)
1 x	XT-60 connector (male)
1 x	MPX Support
1 x	XT-30 connector (pair)
1 x	XH female balance (4S) connector (2 pcs)
1 x	PIN Connector female (100 pcs)
1 x	MPX Sub-D Adaptor
1 x	XH male balance (8S) connector (2 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	XH male balance (3S) connector (2 pcs)
1 x	MPX Support (2 pcs)
1 x	Wing conexion 2 servos JR/Graupner 50 cm
1 x	Red 3m5 mm connector holder
1 x	XH female balance (7S) connector (2 pcs)
1 x	XH LiPo extension lead
1 x	Protector Connector Dean-T (1 pair)
1 x	MR30 connector female
1 x	Protector Connector MPX (1 pair)
1 x	MR30 connector male
1 x	XH male balance (5S) connector (2 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Optotronix Aurora Plug
1 x	XT-90 connector (pair)
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
2 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	White gelcoat 1 Kg
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x	Epoxy Resin L (2.5 Kg)
1 x	Hardener Aero EPH 161 (500 g)
1 x	MEKP Harderner 100 g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Ball link M1.6 (6 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M3 (6 uds)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	Solvent Plasti Dip 1000 ml
2 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Tail tube RAINBOW
1 x	Battery plate
1 x	LA500 housing-lower cyclic
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Spannlack 1000 ml
1 x	Short ball link M3 (6 uds)
1 x	Hovercraft sailcloth
1 x
1 x	Servo NARO Max Std
1 x	Motor rotor LA-500
1 x	Blade Holder Full (4 blades)
1 x	Steering lever
1 x	Bearing housing
1 x	Autogyro Cierva C30 Spain
1 x	Cierva C30 simulated motor
1 x	LA500 tail empennage
1 x	Raer wall
1 x	Head spacer
1 x	Motor wall
1 x	LA500 rotor head core
1 x	Head upper part
1 x	LA500 Blades
1 x	Cierva C30 Body Spain
1 x	Ball joint long
1 x	Fuselage Autogyro RAINBOW
1 x	Rotorshape Elevator
1 x	Balls 4 mm
1 x	Pilot LA 500
1 x	Cierva C30 Elevator
1 x	LA500 ciclic lever
1 x	Head lower part New
1 x	LA500 housing-upper cyclic
1 x	Rotorshape Autogyro
1 x	LA500 cyclic central part
1 x	LA500 rotor head shaft
1 x	Washer 2.2×4

7,374.26EUR