Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » SETOKW

16.00EUR

Opto Gas Engine Kill Switch
[SETOKW]

This kill switch is double Optically Coupled to isolate your ignition system from your radio system (No Interference!!). It also consist an additional safety functions.

Device features
• Includes a remote mountable ultra bright LED to indicate when the ignition is armed or not, or if the safety sequence protection is active.
• The LED diode informs also if Fail-Safe occured during flight (even after landing).
• Safety sequence protection for engine ignition powering up after model preparation.
• Double optically Coupled input/output is Isolated.
• Turning engine ignition ON or OFF directly from RC Transmitter
• No need to use additional mechanical switch for disconnecting ignition battery.
• 8 Bit microcontroller powered directly from RC receiver.
• 3,0 - 24,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad Input (receiver side).
• 3,0 - 20,0 Volt Li-Po/Li-Ion/A123/Ni-Mh/NiCad MOSFET Output (ignition side).
• Possible to use one battery setup (independent two batteries setup by default).
• Max. current output: 5 Amp continous, 16 Amp peak
• Fail-Safe engine kill when interference or signal lose is longer then 1 second. (this function can be turned OFF).
• PPM-PCM 2048 – 1024 & 2.4Ghz Interface Support.
• Low Voltage Drop – Less than 150mv.
• 100% Surface Mount Technology.
• Heavy Gauge Wires 22AWG, universal connectors Futaba/JR.
• Small and light weight – only 15 Grams!

This device plugs into a spare receiver channel.

This is a must have safety device for any gas powered plane! This device allows you to safely kill your engine at anytime (on the ground, or inthe air!)

temporarily out of stock

Reviews

Customers who bought this product also purchased

Spark motor OS nº 3

temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAVAGE Max Red 1080 mm
129.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Conector MR-60 (pareja)
2 x	Extension MPX-MPX 20 cm
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Crimping tool
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Turbina KINGTECH K320 G5
2 x	Starter EM Gear Power 80
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
2 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
2 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
3 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
3 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
2 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Z Bender - S Type Tool
2 x	Starter Sullivan-STAR 601
1 x	Screwdriver for Torx® TX6
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Copier 2x20 cm pcs
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Cut tube
1 x	Hot Glue Stick RED
1 x	Copier 5x20 cm pcs
2 x
1 x	Digital precision scale up to 2000 g
1 x	Stickers-digit for marking
1 x	Optical RPM Sensor
1 x	Transmitter GRAUPNER MZ-24 Pro
2 x	ORACOVER Fluor red (2 m)
2 x	Coupling bush 5 - 5 mm
1 x	Oracover CHROME 2m
1 x	Receiver replacement antenna, approx. 15
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Propeller Pleg CAM-Prop 8x6
1 x	Spinner fixed propeller 42 mm / 5,0 mm
2 x	Oratex Natural White 20m
1 x	Oracover Green10 m
2 x	Oratex White 2m
1 x	Oracover light Grey 2m
2 x	Oratex Red Fokker 10 m
2 x	Aluminium sheet 500x250x0,5mm
1 x	Mini Infrared Thermomiter
1 x	Canopy Latch
1 x	Beech dowels 3.0 x 1000 mm
2 x	Oracover Brown 2 m
1 x	MZ-18, 9 Channel HoTT
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	Receiver replacement antenna, approx. 85
1 x	Decorative caps, multicoloured
2 x	Oracover ROYAL RED 2m
1 x	Oracover GREY Seafire Sea 2m
1 x	Oracover Verde 2 m
2 x	Beech dowels 2.0 x 1000 mm
2 x	Beech dowels 4.0 x 1000 mm
2 x	Flap hinge 33x9 mm (6 pcs)
1 x	Receiver Crystal 35 Mc/s Ch 62
1 x	Transmitter Crystal 35 Mc/s Ch 77
1 x	Oracover White 2 m
1 x	Hose clips 6 mm
1 x	MZ-10, 5 Channel HoTT
1 x	Adjustable brass horn threaded M3
1 x	40,0 mm hydro-propeller (left hydropropeller)
2 x	Monokote BLUE metalizado (1.8x0.65m)
3 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	ORACOVER transparent Yellow (10 m)
1 x	Quick hose connector 6-4 mm
1 x	Oratex Natural White 2m
1 x	Transmitter Crystal 35 Mc/s Ch 62
2 x	Distanzstück motor OS 120 AX
1 x	MZ-12, 6 Channel HoTT
1 x	Charger LiPo Charger4
1 x	Universal Colour Paste white 50 g
1 x
1 x	Spray adhesive AEROFIX 2
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	Presto SF Light Filler styrene-free (420 g)
1 x	Universal Colour Paste deep black 50 g
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Universal Colour Paste deep black 250 g
1 x	20 g tin paste
1 x	Paint gun for sprays
1 x	Horn with ball 40x30
1 x	Round Rod 1,25x1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	White smoke canister 65 g
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	1/12 Pilot "Cougar"
1 x	Propeller RF CFK 14.5x14
1 x	Receptor CORE PBR-26XS 26ch
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Racor 2/3 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 18.0x16.0x1000 mm
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Universal Filter
1 x
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
2 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Sealing Iron Sleeve PROF
1 x	Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x	Blade holder metal LAMA
2 x	Oracover Black 10 m
2 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	PVC transparent battery termo-retract 195 mm (1 m)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	4,8x1000 mm 2:1 blue termoretract tube
2 x	19 mm 2:1 black termoretract tube
1 x	Ply-Span 450x600/13g Black
1 x	Oracover Black 2 m
2 x	6,4x1000 mm 2:1 black termoretract tube
1 x	Solarfilm Lite blue transp. 5m
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	28 mm tailwheel unit
2 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	6,4x1000 mm 2:1 blue termoretract tube
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
2 x	4,8x1000 mm 2:1 black termoretract tube
1 x	Small flex hinge (12 uds)
1 x	Adjustable launching hook
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
2 x	12.7 mm 2:1 black termoretract tube
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Oratex Silver 2m
1 x	PVC lilac battery termo-retract 70 mm (10 m)
1 x	Shaft sleeve LAMA
2 x	1,2x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
2 x	SERVO DES 588 BB MG
1 x	TMM 2512-3S heli
1 x	Oracover Azul Cielo 2 m
1 x	Carbon blade 3D 230 mm
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	ORACOVER Ferrari red (2 m)
1 x	T-shape holder metal LAMA
1 x	Swashplate metal LAMA
1 x	Flybar support metal LAMA
1 x	Oratex Yellow Cub 10 m
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	PVC transparent battery termo-retract 70 mm (10 m)
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Foam plastic plates (310x210x8 mm)
1 x	Ply-Span 450x600/13g Orange
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
1 x	Oracover Azul 2 m
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Jeti Black cap
1 x	Decorative caps, multicoloured, short
1 x	Propeller 11x4,7 SlowFlyer
1 x	76 mm light wheels (2 pcs)
1 x	Cooler motor type 150
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	LASER 73" 1.85m (05) PILOT
1 x	FALCON 20X9 CARBON PROPELLER (GAS)
1 x	Propeller POWER-PROP 13x9 Izda
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	12V Car Adapter
1 x	Reductora IPS 150 DX2BB-BXCS 7:1
1 x	Foam wheel Ø 351 mm (2 pcs)
1 x	Reductora IPS dual-motor 10,7:1 with spinner
1 x	Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x	Cooler motor type 280
1 x	Propeller 8x4,3 SlowFlyer
1 x	Propeller 10x4,7 SlowFlyer
1 x	Cooler motor type 400
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	EXTRA 300 78" V3 Orange/Blue
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Hardener Aero EPH 161 (500 g)
1 x	Hardener Aero EPH 161 (250 g)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x	ABS I Strip 10x5x1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	EXTRA NG 85" 2159mm yellow/blue
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	SLICK 360-B 104" (2640 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x	Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Stainless Steel Bend D 12x0,4mm
1 x	Captador OS GT 33 cc
1 x	L ELBOW 90º ø 25 mm
1 x	180° TUBE-ANGLE Ø 25 mm
1 x	Giant Scale Muffler D.A. 150 (2 pcs)
1 x	L ELBOW 90º ø 25 mm

19,757.27EUR