Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Silver
3,300.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ALBATROS 3.0 m (orange/white)
1 x	FOX 2.300 mm V2 PNP (FMS)
1 x	PPM Encoder Module
1 x	FANTASY ARF 3.0m, Fundas alas
1 x	Ion Pro NG electric with flaps ORANGE (JP Model)
1 x	HERON RR
1 x	ABS tube 3.0x2.0x330 mm
1 x	Xplorer2 anemometro
1 x	X-RAY Micro QR (Fuselage with canopy)
1 x	Aero-Master (Aero-naut)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Crimping tool
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Vacuum pump 12 CFM
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Starter EM Gear Power 250
1 x	1,5x50 mm allen screwdriver
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Hot Glue Stick BLACK
1 x	Z Bender - S Type Tool
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Round Rod 1,0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	Piloto JET 1:3,5
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	30 cm MULTIPLEX female connector
1 x	Pilot "Anthony" (Slimline)
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Socket head long ball link M3 (6 uds)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Gates hinge
1 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x	Medidor ángulos y/o incidencias
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Cable coupler M2 (10 uds)
1 x	Connector CAN 15
1 x	ORACOVER Fluor red (2 m)
1 x	Suncover 100cc Red
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	5 line servos wire black (1 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 05
1 x	Adapter lead MPX/EC3
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Cabel "Y" 15 cm
1 x	LOWER TOW HOOK
1 x	Premium servo extension 50cm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Flip ARF (Top Model)
1 x	Fascination 3600 mm, Spare Elevator (Top Model)
1 x	Fascination 3600 mm, Canopy (Top Model)
1 x	IKURA 4.0 m
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Z Bender - S Type Tool
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Hot Glue Stick RED
1 x	Beech dowels 4.0 x 1000 mm
1 x	Crimping tool
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Cable coupler M2x66 (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	1/6 Pilot "John"
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Round Rod 1,5x1000 mm
1 x	6,4x1000 mm 2:1 green termoretract tube
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	Oracover Black 2 m
1 x	Oracover CARBON Metalic 1 m
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M1.6 (6 uds)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	18 mm reinforced hinge
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	1/12 Pilot "Fighter"
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Ball link M3 (10 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	ABS I Strip 20x10x1000 mm
1 x	4 mm M3 red control terminal (4 pcs)
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Cable coupler M2,5 (2 pcs)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	1/6 Pilot "Tony"
1 x	Ball link M2 (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	1/6 Pilot "Garry"
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	200 mm extensión servo HITEC/JR
1 x	ABS tube 14.0x10.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	DELPHIN Race 3.6m c64
1 x	Glidder Mü13e (Bergfalke)
1 x	Ion Pro NG electric with flaps GREEN Fluor (JP Model)
1 x	Tube Pitot to PIXHAWK
1 x	X-RAY Micro QR (Rudder)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Vasa model Catapult
1 x	FANTASY ARF 3.2m
1 x	ASG 32 560 mm
1 x	Avia (Top Model)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Albatros ,spare cockpit (Top Model)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Albatros red/white (Top Model)
1 x	X-RAY Micro QR (Elevator)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Gracia (Top Model)
1 x	BIG MOSNTER
1 x	EASYGLIDER 4 RR
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Bungee HLG Premium
1 x	Avia spare blue cockpit (Top Model)
1 x	CYCLONE XT 6.2m ARF
1 x	Fascination 3600 mm (Top Model)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Glider STROLCH
1 x	Y Cable
1 x	GPS Expander Module
1 x	Digital precision scale up to 2000 g
1 x	Starter Sullivan-STAR 603 DINATRON
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Screwdriver for Torx® TX8
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	One touch canopy lock
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Starter EM Gear Power 80
1 x	Hot Glue Stick GREEN
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Ball Link Plier
1 x
1 x	BALSA triangular 15x15x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Screwdriver for Hexagon 1,27mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Cockpit plastic closing
1 x	Steering arm 16 mm Ø 4 mm
1 x	Copier 2x20 cm pcs
1 x	Dust collector for mould cleaning
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x	SUS wire 3m (nylon coated)
1 x	Ball Link Plier
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Locking cable tie 2.5x100 (uds)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Steering arm 16 mm Ø 3 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	2,5x60 mm allen screwdriver
1 x	Beech dowels 10 mm x 1000 mm
1 x	2,0x50 mm allen screwdriver
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Canopy Latch
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	BALSA triangular 8x8x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Covered closure or fairings
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Screw-lock connector M2 (2 uds)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Strip 3,5x1,75x330 mm
1 x	30 cm DEANS female connector
1 x	Socket head ball link M3 (2 uds)
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Conector BEC male (10 pcs)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Buy Perforated film 145 cm / 50 m
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Buy Perforated film 100 cm / 10 m
1 x	10m servo "Premium" wire (white/red/blue)
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1/4 Pilot "Heidi"
1 x	Cable coupler M3 (10 uds)
1 x	Joint with bearing M2 22x5,5
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	6 mm ball link M3 (10 pcs)
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	1/10 Pilot "Jimmy"
1 x	Long ball link M3 (6 uds)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Oracover Azul 2 m
1 x	1/12 Pilot "Tom"
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	Round Rod 4,0x1000 mm
1 x	Banna gold connector 2,5 mm (M/F)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	25 mm reinforced hinge
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	1/6 Pilot "Buddy"
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	USB Mini Camera endoscope
1 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Bag connector 2 mm
1 x	1/10 Pilot "Jack"
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	4,8x1000 mm 2:1 red termoretract tube
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Conector Servo female 4 pines
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Glases Ace
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Long pinned hinge (6 uds)
1 x	Conector JR Servo male (50 pcs)
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Round Rod 2,5x1000 mm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Glases Stratus
1 x	Conector MR-60 (pareja)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	800TVL CMOS camera for FPV
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Conector JR Servo female (10 pcs)
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Flap hinge (6 pcs)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	1/6 Pilot "Cindy"

19,771.61EUR