4,551.42EUR

BULL MØ1 2.600mm "RED BULL"
[HABULLMo1RDB]


BULL MØ1 2.600mm \"RED BULL\"
BULL MØ1 2.600mm "RedBull"

An innovative structural design and its original design make the BULL Mo1 original and elegant.
Its NACA shots made by our aeronautical engineers make the Bull Mo1 possibly the most advanced aircraft in the market in terms of the design of "fluid dynamics" on an RC jet.
Fully built in "vacuum technology" with new materials and the most advanced techniques.
The construction quality is higher compared to the standard in the market.
Quick and easy to build.
The large opening at the top allows easy access for the installation of all electronic components and thus can be completely inspected. It has a lower access for the installation and testing of the turbine, with a completely new system for anchoring the turbine.
The flight characteristics are incredible at all speeds, but where it demonstrates its power is in its slow and harmonious flight.
Thanks to this feature, the BULL Mo1 can be flown by novice pilots, but they will delight the most extreme pilots.
The BULL Mo1 has been designed to be used with turbines from 13 Kg to 20 Kg. It is also possible to install a Vector trust to perform 3D maneuvers.
Factory building and custom painting service is available

Wingspan 2.600 mm
Lenght: 2.260 mm
Weigh kit aprox. 6.990 g
Turbine 13 a 20 Kg


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Oracover ROYAL RED 2m
1 x Oracover White 10 m
1 x Oracover Orange 2 m
1 x ORACOVER transparent Yellow (10 m)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Oracover Yellow CUB 10 m
1 x Oracover Green10 m
2 x ORACOVER Fluor red (2 m)
1 x Ply-Span 450x600/13g Blue
1 x Oracover Yellow CADMIO 2 m
2 x Oracover Azul 2 m
2 x Ply-Span 450x600/13g Yellow
1 x Oracover GREY Seafire Sea 2m
2 x Oracover Black 10 m
1 x 30 cm BEC cable (male)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Paramotor BackPack XXS 2
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Pilot "Goose" (Slimline)
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x Servo SAVOX SH 0257 MG
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x L-shaped servo mount
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Digital scale up to 40 kg
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Servo SAVOX SV-0236 MG HV
1 x Servo SAVOX SW-1250 MG digi
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Fast attachment for servos (25 pcs)
1 x Futaba 76/92 mm servo pull-pull double arm with ball link
1 x Futaba 25 mm servo arm with ball link
1 x Servo MKS 6100 DS
1 x Futaba 54 mm servo arm with ball link
1 x Futaba 52 mm servo arm
1 x Servo MKS HBL599 SL
2 x 18 mm wing servo holder
1 x SERVO DES 658 BB MG
2 x 50x45 mm micro-mini servo cover
1 x Servo HBS 690BB HV Digital
1 x 50 mm servo arm with bearing (2 pcs)
1 x SERVO DES 588 BB MG
1 x NF-3X-80 liner Kit
1 x Oracover Yellow CUB 2 m
1 x Oratex Natural White 2m
1 x 3,2x1000 mm 2:1 black termoretract tube
2 x Oratex Antik 2m
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Oratex Red Fokker 10 m
2 x Ply-Span 450x600/13g Orange
1 x Oracover Azul Cielo 2 m
1 x Oratex White 2m
1 x 1,6x1000 mm 2:1 black termoretract tube
1 x PVC blue transparent battery termo-retract 95 mm (1 m)
2 x Ply-Span 450x600/13g White
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Oratex Yellow Cub 10 m
1 x Oracover CHROME 2m
1 x Oracover White 2 m
1 x RX external cable for estandar receivers
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
2 x 68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x Ply-Span 450x600/13g Black
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x Oracover light Grey 2m
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x 800TVL CMOS camera for FPV
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x Foaming agent for epoxy resins 200 g
1 x HV6150 Digital Servo
1 x Servo safety connector (10 pcs)
1 x Futaba 30 mm servo arm with M3 ball link
1 x LED blink wire flashing (blue - 2pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Vacuum bag, 1200 mm x 50 m
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Hardener Aero EPH 161 (250 g)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Mixing tube for double syringes and cartridges (MR 1:1 and 2:1)
1 x 45 mm black plastic spinner for fixed propeller
1 x Spinner plastic white fixed propeller 30 mm
1 x 36 mm red plastic spinner for fixed propeller
1 x 50 mm white plastic spinner for fixed propeller
1 x Spinner plastic red fixed propeller 30 mm
1 x 42 mm white plastic spinner for fixed propeller
1 x 40 mm white plastic spinner for fixed propeller
1 x 45 mm white plastic spinner for fixed propeller
1 x Spinner plastic white fixed propeller 42 mm
1 x 42 mm black plastic spinner for fixed propeller
1 x 50 mm black plastic spinner for fixed propeller
1 x Servo HITEC HS-65 HB
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Servo TT ACE SHV 1504 MG
1 x LED wire (orange - 2pcs)
1 x Servo MKS HV6130
1 x LED blink wire flashing (green - 2pcs)
1 x SSPS105 Super Hi-Power servo
1 x Futaba 20 mm servo arm
1 x Servo MKS HV1220
1 x Horizontal mounting servo holder
1 x Servo JETI DSHV 3D13T (13 Kg)
1 x MultiLog Altimeter
1 x NF-3m Heli Kit
1 x Hitec 25 mm servo arm with M3 ball link
1 x DPSI 2001 RV
1 x DPSI LR-S (with push buttons)
1 x DPSI Micro MPS
1 x DPSI Micro - RCS
1 x ALBATROS 3.0 m (orange/white)
1 x Challenger ARF (Top Model)
1 x Oracover CARBON Metalic 1 m
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x RANGER Jet Red/Yellow 1.854mm combo
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x Boomerang ELAN STARS & STRIPES Combo
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Motor mount for 1200 mm models
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x Canopy Astra
1 x Electric spoiler 185 mm (2 pcs)
1 x PVC transparent black termo-retract battery 185 mm (1 m)
1 x 4,8x1000 mm 2:1 black termoretract tube
1 x Albatros ,spare fuselage (Top Model)
1 x PVC termo-retract battery 95 mm blue transparent (1 m)
1 x PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x Pipa 3D F-16 Scale 1/6
1 x HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106
1 x TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x MB-339 Aerofoam G2 "Italian Air Force Camu"
1 x PIX Hawk with accesories
1 x PPM Encoder Module
1 x Boomerang SPRINT V2 Yellow/Black
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
22,437.86EUR
Manufacturers
Manufacturer Info
Hispano Aviacion
Other products
Languages
Español English
Currencies