1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x Ventus 1:4 set of instruments
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x One touch canopy lock
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Cockpit plastic closing
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Steering arm 16 mm Ø 4 mm (2 uds)
2 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Steering arm 16 mm Ø 3 mm
2 x Screw-lock connector Ø 2 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm
2 x Cap closure 33/23.5mm (2 uds)
3 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Cierre cabina aluminio Ø4, I=10 mm
2 x Steering arm 16 mm Ø 4 mm
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x SUS wire 3m (nylon coated)
2 x 800TVL CMOS camera for FPV
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Solvent Plasti Dip 1000 ml
2 x Paint gun for sprays
1 x Spray YELLOW Inca Lexan 150ml
1 x Universal Colour Paste deep black 50 g
1 x PARTALL® Hi-Temp Wax, 340 g
2 x 500 ml sealer (DOPE)
1 x Spray Graphit 33
1 x Spray EC Red 400ml
1 x Plasti Dip Liquid Tape 429 ml orange
2 x Nitroverdu 500 ml
1 x Release wax 250ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x 
2 x Spray adhesive AEROFIX 2
1 x Cable with accesories
1 x White smoke bombs AX-60 (5 pcs)
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
2 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Window mounting channel Type H 2.5x0.5 (2 m)
1 x Soporte grifo FESTO (2 pcs)
1 x Covered closure or fairings
1 x PROFI TX fastening rings
1 x Transmitter JETI Duplex DS-12 EX Multimod BLACK
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark BLUE Multimod
1 x JETI transmitter DC-14 II Green Multimode
1 x Transmitter JETI Duplex DS-12 EX Multimod BLUE
1 x Transmitter JETI Duplex DS-12 EX Multimod YELLOW
1 x Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2
1 x Emisora JETI Duplex DS-16 II Carbon Line YELLOW
1 x JETI handheld transmitter DS-14 II Blue Multimode
1 x Arnes cruzado Confort de Luxe PROFI
1 x DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2,4GHz MRPM-AC EX
1 x Quadcopter Q50 Kit Carbon Fiber
1 x Carbon plate 350x150x1.0 mm
1 x DUPLEX 2.4 EX MBar
2 x FA27.2×8.9 Prop-2PCS/PAIR
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x Locking cable tie 2.5x100 (uds)
2 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x ABS tube 18.0x16.0x1000 mm
1 x Motor DLE 430 cc - Paramotors
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 3-blades 16x10 carbon prop Super Silence
2 x Spray adhesive INFUTAC (Clear) 500 ml
2 x Hobbylite Filler, Balsa colour
1 x Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Paramotor BackPack XXS 2
1 x Parachute PV6 for F3J
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x Aramid 50 daN 50 m
1 x MAX pilot ARTF
1 x Wing OXY 5,0 m2
1 x Windsock Ozone L -1200 mm
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
3 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Tube Pitot to PIXHAWK
2 x PIX Hawk with accesories
1 x Para-RC Mix
1 x Wing OXY 0,5 pulgadas2
2 x Paramotor BackPack XXS (without accessories)
2 x Parachute BACKUP X100
1 x Set cintas unión paracaídas 145 cm
1 x Windsock Ozone L - 700 mm
1 x Opale Rucksack
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Para-RC Trike "RC-Bullix"
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Parachute P4
1 x EXTRA 330L 35% hardware pack (Precision Aerobatics)
2 x ULTRA STICK 10 cc ARF
1 x EDGE 540 1.73m SEAGULL Model
1 x EDGE 540-A 91" (2310 mm)
1 x Sebart 2.2 m YELLOW/BLACK (SebART)
1 x FunCup XL RR
1 x SUPER DIMONA TC-80
1 x CESSNA 50E White/Blue
1 x Pilatus PC-21 + LG.2100 mm BLUE/WHITE (SebArt)
1 x Receiver DUPLEX REX 3 A20 2.4 GHz
1 x SBEC 40
1 x DUPLEX Satellite receiver Rsat 900
1 x Master MEZON 120
1 x VIPER 1.7 Electric break wheels + structure
1 x IKARUS plane
1 x WINGO 2 ARF
1 x BETA 1400 ARF Red
1 x ROBIN S50E BLUE/WHITE
1 x FunCub NG verde RR
1 x SkyMaxx 1.550 mm (kit)
1 x DRACO 2.0m PNP
1 x DRACO 2.0m BNF
1 x METEOR 1.000 mm kit
1 x DRACO 2.0m landing gear
2 x Skyray (RBC Kits)
1 x JOKER 3 1550mm
1 x Pilatus PC-21 2100 mm RED/WHITE (SebArt)
1 x DRACO 2.0m Helice 14.5x9 4-Blade
1 x Pilatus PC-21 2100 mm BLUE/WHITE (SebArt)
1 x F9F Panther (Aero-naut)
1 x Avanti S 1.8m Jet White/Blue
1 x Jun-Si iCharger 4010 Duo
1 x DUPLEX R7 REX receiver 2,4GHz
1 x White aluminium 230 mm landing gear
1 x DUPLEX R14 receiver 2,4GHz
1 x Receptor DUPLEX REX R9 Slim Assit
1 x DUPLEX R18 EX 2,4GHz + Rsat2
1 x Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX
1 x DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x CRACK YAK (Mini) 600 mm
1 x Transmitter Stick Ends JETI DS-16/14
1 x DUPLEX R7 receiver nano 2,4 GHz
1 x DUPLEX R12 receiver REX Assist
1 x Motor Set CHALLENGER Indoor
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x 3 mm metalic joint for DA-35 or DA-75 cilinder/elbow
1 x 27x10 prop Super Silence
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 200cc Std
1 x 500 ccm complete gasoline fuel tank
1 x Pipa 3D F-16 Scale 1/6
1 x F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x BD-5 Pro ARF
1 x VIPER JET G2 Esq. 5 Green/White/Blue
1 x Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x Esc MasterSPIN 16 Pro
1 x Servo NARO Max Std
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x PPS-4D Propeller
1 x Receiver DUPLEX R5L EX 2.4 GHz
1 x Big Crow DLE-170M
1 x Oratex Natural White 20m
1 x Oratex Red Fokker 10 m
1 x Oratex White 2m
1 x Motor DLE 200cc Premium Muffler
2 x 21x12D BIELA propeller (3-blades)
2 x 25x14 4Bl Scale
1 x SLICK 360-B 104" (2640 mm)
1 x Trike XL motor set (motor+esc+prop)
1 x LUCAS pilot ARTF
1 x 18x8 BIELA 3Bl propeller (3-blades)
1 x 26x18 BIELA propeller
1 x 20x10 BIELA propeller (3-blades)
1 x 17x10 BIELA propeller (3-blades)
1 x 18x8 BIELA propeller
1 x 19x10 BIELA propeller (3-blades)
1 x 23x10 BIELA propeller (4-blades) Scale
1 x 22x10 BIELA pusher propeller
1 x 26x16D BIELA 3Bl propeller (3-blades)
1 x 24x10 4Bl Scale
1 x 22x8 BIELA propeller
1 x 26x8 BIELA propeller
1 x 23x8 BIELA propeller
1 x 26x12D BIELA 3Bl propeller (3-blades)
1 x 18x10 BIELA propeller SCALE (3-blades)
1 x 26x12 BIELA 3Bl Pusher propeller
1 x 22x12 BIELA propeller (3-blades)
55,522.72EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies