Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

VSpeak ECU converter KingTech
79.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Ferrita 14x8x5.5 mm
1 x	Ferrita con funda
1 x	Ferrita 27x14x7 mm
1 x	Bisagra 25 mm reforzada
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Perfil Acero Inox. 9.0x5.0x1000 mm
2 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x	Perfil de ABS de media caña 3x1000 mm
1 x	Bisagra papel lite CA (12 uds)
1 x	Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x	Conector ABS "CRUZ" 4.0 mm x 1000 mm
2 x	Conector ABS "H" 4.0 mm x 1000 mm
1 x	Bisagra de aluminio desmontada 6x98 mm (2 pcs)
2 x	Conector ABS "L" 1.0 mm x 1000 mm
1 x	Perfil Acero Inox. 15.5x8.5x1000 mm
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x	Bisagra 15 mm reforzada
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Perfil de ABS "L" 3,0x3,0x1000 mm
1 x	Perfil de ABS "L" 6,0x6,0x1000 mm
1 x	Perfil de ABS de media caña 2,5x1000 mm
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Perfil de ABS de media caña 2,0x1000 mm
2 x	Perfil Acero Inox. 12.3x7.7x1000 mm
1 x	Bisagra correa de latón en miniatura 1m
2 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
1 x	Perfil de ABS "L" 2,0x2,0x1000 mm
2 x	Conector ABS "L" 4.0 mm x 1000 mm
1 x	Canal de ABS de 3,0x6,0x1000 mm
2 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Perfil de ABS cuadrado 2 x 1000 mm
1 x	Perfil de ABS "L" 1.5x1.5x1000 mm
2 x	Bisagra cilíndrica 4,5 Ø x 12 x 67 mm (10 pcs)
1 x	Arrancador Sullivan-STAR 603 DINATRON
2 x	Banda lijado g. 120 para BSL 220/E (5 pcs)
2 x	Acumulador polvo para limpieza moldes
1 x	Destornillador Allen 1.27 mm
1 x	Arrancador 12v (Max 180 and 30ccm)
1 x	Crimpadora
1 x	Barra pegamento caliente Verde
1 x	Conector "T" 6-6-6 mm tubo bomba vacio
1 x	Alicate para hacer "Z"
1 x	Barra pegamento caliente Negro
2 x	Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x	Motor A2212/13T
1 x	PVC termo-retráctil batería 135 mm transparente (1 m)
1 x	Plancha ABS 500 x 400 x 0,5 mm (blanca)
1 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
1 x	LO 100 Scale 1:2 - Modellbau Bruckmann
1 x	SATORI 2 PRO V C64 F5J
1 x	Bisagra de Flaps (6 uds)
1 x	Bisagra Larga flexible (12 uds)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Perfil de ABS cuadrado 1 x 1000 mm
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Perfil de ABS de media caña 6,0x1000 mm
1 x	Perfil de ABS de media caña 5,0x1000 mm
2 x	Perfil de ABS "T" 4.0x4.0x1000 mm
1 x	Perfil de ABS cuadrado 3 x 1000 mm
1 x	Perfil de ABS triangular 6.0x1000 mm 90º
1 x	Plancha de balsa 1,5x100x1000 mm
1 x	Listón de NOGAL 2,0x2,0x1000 mm
2 x	Bomba de vacio 12 CFM completa
1 x	Filtro para bomba vacio
1 x	Pasta soldar 100g
1 x	Dremel 3000 130W
2 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Punta recambio soldador KAVAN 668838
1 x	Destornillador allen "Hex" Ø 2.0 molibdeno
1 x	Alicate para "Ball-Link"
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Disco Corte Proxxon/Dremmel 22 mm
2 x	Alicate para "Ball-Link"
3 x	Destornillador allen 2,5x60 mm molibdeno
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Listón de PINO 3,0x5,0x1000 mm
1 x	Listón de BALSA 4,0x4,0x1000 mm
1 x	Listón OBECHI 2,0x3,0x1000 mm
1 x	Listón triangular de BALSA 10x10x1000 mm
1 x	Listón de PINO 5,0x5,0x1000 mm
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Listón de PINO 2,0x2,0x1000 mm
2 x	Soporte lija 25 mm
2 x	Crimpadora
1 x	Barra pegamento caliente Rojo
3 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Lija cóncava-convexa con papel de 13 mm
1 x	Corta tubos aire
1 x	Bolsas inyectoras desechables (30x16cm) 100 pcs
1 x	Tijera Aramid 21 cm/8" PROTON
1 x	Molde conector Dean-T
1 x	Banda lijado g. 180 "Carburo de Silicio" para BSL 220/E (5 pcs)
1 x	Bomba de vacio P1-N
1 x	Llave inglesa de precisión L100 mm
2 x	Soporte turbina Xicoy X45 Jeemo
1 x	Varilla acero Ø 1,5 mm x 1000 mm
1 x	Funda fuselaje JEEMO
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Carro remolque JEEMO
1 x	Fournier RF-4D
1 x	Aro soporte P-20 OPUS V-Jet 60mm
1 x	Receptor FUTABA R617 FS 2,4 GHz
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Perforador hélices DA-35/50/60/70
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Herramienta para desmontar kwik link
1 x	Soporte para cables L 10 mm (6 pcs)
1 x	Soporte trasero 45 mm para motor gasolina
1 x	Soporte trasero 15 mm para motor gasolina
1 x	Hélice PT 16x10 E
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
2 x	Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x	Perfil Acero Inox. 6.3x3.5x1000 mm
1 x	Listón de NOGAL 3,0x3,0x1000 mm
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Pincel Gr.5
1 x	Mini-clip
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Destornillador allen 2,0x50 mm molibdeno
2 x	Molde conector Sub-D
1 x	Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x	Molde conector XT-60
1 x	Molde conector XT-30
1 x	Rueda de acero Proxxon/Dremmel 2,35 mm
1 x	Goma arrancador KAVAN "soft"
1 x	Roller cutter 28 mm
1 x	Destornillador Torx® TX6
1 x	Lija con papel de 13 mm
1 x	Cable acero trenzado Ø 0,5 mm (10 m)
1 x	Adaptador de hélice 3.2 mm M8
1 x	Bisagra Pequeña flexible (12 uds)
1 x	Alicate para hacer "Z"
1 x	Tarjeta programadora RAY G2
1 x	Plastilina para moldeado (1 Kg)
1 x	Soporte trasero 25 mm para motor gasolina
1 x	Soporte trasero 50 mm para motor gasolina
1 x	Soporte trasero 5 mm para motor gasolina
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Eje rueda 4x16 mm (2 uds)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Sistema cierre negro doble cara 20x1000 mm
1 x	Círculo autoadhesivo 12 mm (49 pcs)
1 x	Juego pegatinas JEEMO "Andy"
1 x	FOX MDM-1 3.500 mm ARF White

14,671.77EUR