Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	DYNAMOMETER S-1580
2 x	Extinguisher CO2 - 2 Kg
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Slave-cable USB Easy Sim
2 x	M2/M1/6 3Diam long black ball link V1 (2 pcs)
2 x	M2,5 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	M2,5 5Diam black ball link V2 (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	6 mm hexagonal ball link M3 (10 pcs)
2 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
2 x	SE Ring 450 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
3 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
3 x	Foil for sticking flaps and ailerons
1 x	Short ball link M1.6 (6 uds)
1 x	SE Ring 300 mm (2 pcs)
1 x	Joint with bearing M2 22x5,5
1 x	Ring 320 mm length (5 pcs)
2 x	M2 5Diam black ball link V2 (2 pcs)
3 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
2 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	M3 Maxi ball link (2 uds)
2 x	Ball link M3 (10 pcs, flat ball)
1 x	M2,5 Diam metal ball link V3 (2 pcs)
1 x	Blue metalic ball link M3/3 azul (2 pcs)
1 x	Joint with bearing M2,5 22x5,5
4 x	Spikes Band (5 m)
3 x	SE Ring 480 mm (2 pcs)
1 x	Socket head ball link M3 (2 uds)
1 x	Ball link M3 (6 uds)
2 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Ball link M2,5 (10 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	DUPLEX 2.4EX Central Box 210
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Aluminium ignition bad (red)
1 x	Landing gear axle Ø 8 mm (2 uds)
1 x	Blades 330mm
1 x	Landing gear axle Ø 4 mm (2 uds)
3 x	M3 Maxi ball link (2 uds)
3 x	20x200 mm battery rings
1 x	Wheel collar 2 mm Ø (4 uds)
3 x	SE Ring 350 mm (2 pcs)
2 x	SE Ring 240 mm (2 pcs)
2 x	Tape GFK 50 mm
1 x	Katana Mini carbon wheel pants (2 pcs)
1 x	Wheel collar 5 mm Ø (4 uds)
2 x	Fuselage Autogyro RAINBOW
1 x	Blade Holder Full (4 blades)
1 x	GameCommander USB Universal
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Propeller POWER-PROP 7x7
1 x	SE Ring 250 mm (2 pcs)
2 x	SE Ring 330 mm (4 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	MAX pilot ARTF
2 x	Paramotor BackPack XXS 2
2 x	Paramotor BackPack XXS (without accessories)
1 x	Parachute BACKUP X100
3 x	Set cintas unión paracaídas 145 cm
3 x	Para-RC Trike "RC-Bullix"
2 x	Wing OXY 5,0 m2
1 x	Motor mount VANQUIST 48" F3A
1 x	Secraft Fuel system v2, red color
1 x	Adapter lead MPX/XT60
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	DPSI Ampere battery backer
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Connector CAN 15
1 x	CC 01
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 200 mm (2 pcs)
1 x	Ball link M2 (10 pcs)
1 x	Long ball link M2 (6 uds)
1 x	Blue metalic ball link M2/2 azul (2 pcs)
2 x	Long ball link M3 (6 uds)
1 x	SkyMaxx 1.550 mm (kit)
1 x	Hovercraft sailcloth
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	NoNa BB wheel Ø130x40mm in pair
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Propeller Pleg CAM Carbon 14x12
1 x	Propeller Pleg CAM Carbon 12x6.5
1 x	Propeller Pleg CAM Carbon 10.5x6
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Propeller Pleg CAM Carbon 11x7
1 x	Propeller Pleg CAM Carbon 13x10
1 x	Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x	Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x	Distanzstück motor OS 120 AX
1 x	Junta humo metalica G85 (DLE85/DLE170)
1 x	Junta humo metalica G30 (DLE30/DLE60)
1 x	JM electric Pump
1 x	Spinner INOVA 45 mm White
1 x	Falcon Carbon Spinner 82mm for electric motor
1 x	51 mm INO spinner (carbon imitation)
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Three-position switched channel, short
1 x	FX three-position switched channel, long
1 x	R617 FS 2,4 GHz receiver
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x	Short ball link M2 (6 uds)
1 x	Propeller Pleg CAM Carbon 10x12
1 x	M3/5Diam metal ball link V3 (2 pcs)
1 x	M2,5 Diam metal short ball link V3 (2 pcs)
1 x	Propeller Pleg CAM Carbon 15x6
1 x	Propeller Pleg CAM Carbon 14x6
1 x	Propeller Pleg CAM Carbon 10x5
1 x	M2,5 5Diam metal ball link V3 (2 pcs)
1 x	Short ball link M3 (6 uds)
1 x	Joint with bearing M3 22x5,5
1 x	Propeller Pleg CAM Carbon 12x11
1 x	Propeller Pleg CAM Carbon 14x7
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Propeller Pleg CAM Carbon 12.5x7.5
1 x	Socket head long ball link M3 (6 uds)
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Wing OXY 0,5 pulgadas2
2 x	Windsock Ozone L -1200 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Combo AM480 T-Motor 650 Kv
1 x	Motor mount class 48"
1 x	Spring Clip Ø25 mm
1 x	Spring clamp for tube Ø50 mm
1 x	Compact Pitts Muffler OS MAX.35.40 FP
1 x	Junta humo metalica G35 DLE35
1 x	Giant Scale Muffler D.A. 70
1 x	Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x	O-ring Saito FG-73 5cyl
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	Spinner INO 63 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. fixed propeller 50 mm / 3,2 mm
1 x	FIALA Propeller 23x8 Electric
1 x	Blade Holder Full (3 blades)
1 x	LA500 housing-upper cyclic
1 x	Trike XL motor set (motor+esc+prop)
1 x	Parachute PV6 for F3J
2 x	Windsock Ozone L - 700 mm
1 x	Para-RC Mix
1 x	Paramotor Trike XL
1 x	Rescue 1,8m2 / BackPack
1 x	Nose OPTIMA 2.200 mm (Elec or Glider)
1 x	V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x	Fuel line plug Large 2 pcs

9,876.89EUR