Top » Catalog » Gas. Motor Paramotors » ROIDLE200STD

2,500.00EUR

Motor DLE 200cc Std
[ROIDLE200STD]

This engine is not toy. For your own safety, please read the manual carefully before operation. DLE is not responsible for all injuries result from the use.
Thank you for purchasing the DLE engine. DLE200 is a opposed cylinder 2-stroke engine designed for paramotor and UAV. It has unique feature with light weight, long life, high power and low vibration. The design of DLE200 does not use the tuned pipe by routine. It improves the engine's power limit and extends the life of the engine with excellent throttle respond and curve. DLE200, with its new design, will offer you unexpected flight experience.
This engine is not a toy! Therefore, all users who are not specifically skilled or trained to perform the operation or flight should stop the dangerous action and be performed following the help of the experienced.
Misuse or inaccurate maintenance may result in damage of engine, injury or death. Installation, trial run and maintain of the engine must be carried out by experienced. DLE will not be liable for any damage or death caused by misuse or inaccurate maintenance.
This is not a certified aircraft engine. User assumes all risk of use and acknowledges by his use that he knows the engine is subject to sudden stoppage. DLE will not be liable for any damage or death caused through the sudden stoppage in the air.
This engine does not have product liability insurance. We cannot assure the nonoccurrence of the engine failure. Using the engine can be dangerous and accidents can result in serious property loss, injuries or death! Never start the engine if you don't want to take the risks.

Type 2 stroke
Bore 55mm
Stroke 42mm
Displacement 200CC Power ( Premium Muffler ) 23HP/8000rpm
( Standard Muffler ) 20HP/7500rpm
Compression Ratio 10:1
Reduction ratio 1:2.7
Transmission Type Belt
Starting Type Electrical Start
Net Weight (without muffler) 10.3 Kg
Standard Muffler Weight 1.1 Kg
Premium Muffler Weight 2.2 Kg
Spark Plug DLE-8A
Petrol 93# 、97#
Alternator Output 14V 1A
Premium Alternator Output 14V 4A
Propeller 1220mm Applicable Pilot Weight (Premium Muffler) 120Kg
Applicable Pilot Weight (Standard Muffler) 80Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	Stickers-digit for marking
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	CC 01
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	3 LiPo XH>EH adapter
1 x	CC 03
1 x	CC 05
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger transmitter GRAUPNER
1 x	Dean "T" - Futaba Adapter
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	Glases Flitemaster
1 x	Glases Stratus
1 x	Glases Aspen
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Wing OXY 5,0 m2
1 x	Cabel "Y" 30 cm (graupner)
1 x	Cable coupler M3 (10 uds)
1 x	1/10 Pilot "Jimmy"
1 x	Suncover 100cc Red
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
2 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	50m servo "Premium" wire (white/red/blue)
1 x	120x60 mm SLH KOVO wheel
1 x	Extension silicon 30 cm female (Futaba)
1 x	Futaba Female 40 cm extension
1 x	Cable S.BUS 3 salidas 300 mm
1 x	Cabel "Y" 30 cm (Futaba)
1 x	Extension 15 cm (Futaba)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
2 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Carbon plate 500x400x2.0 mm ISOTECH
1 x	Chopped glass fibre strands 3 mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Astra (Top Model)
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Bidule 111 3000 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Bidule 55 V3 2460 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Canopy Astra
1 x	11 mm wing servo holder
1 x	Electric spoiler 185 mm (2 pcs)
1 x	Challenger ARF (Top Model)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Tape GFK 50 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Albatros ,spare fuselage (Top Model)
1 x	SE Ring 400 mm (2 pcs)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	Astra wing Joinner (Top Model)
1 x	Avia spare blue cockpit (Top Model)
1 x	ACTIVE ARF Electric 1.995 mm
1 x	Bidule 111 3000 mm Canopy
1 x	SE Ring 300 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	BULLIT Wing 840 mm
1 x	Electric spoiler 250 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Electric spoiler 300 mm (2 pcs)
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x	Spikes Band (5 m)
1 x	18 mm wing servo holder
1 x	Albatros red/white (Top Model)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	13 mm wing servo holder
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x	Canopy Sweet / Siesta
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Bidule 170 ARF 3.48 m
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 3,0 mm M6
1 x	12 mm dogdrive props
1 x	Adapter 3,2 mm M6
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	DLE-55RA Ignition unit
1 x	Canister combo DLE 120 cc
1 x	Sparkplug DLE CM6
1 x	CILINDER FOR DLE55, DLE111, DLE222
1 x	Carburetor DLE 20
1 x	DLE Ignition 111/120/170
1 x	Electric Fuel Pump 12v

12,520.45EUR