13.75EUR

Epoxy 5min KAVAN 2x 100g
[KAV569963]


Epoxy 5min KAVAN 2x 100g
Premium 5min clear two-part epoxy adhesive. Packaging: 2x bottle 100 g (hardener + resin).
A clear, very fast curing, two-component, high-strength epoxy adhesive that is resistant to fuels, solvents and vibration; easily sandable when fully cured. Does not become brittle with age. Bonds wood, fibreglass, carbon composites, aluminium, copper, steel, brass, concrete, glass, hard plastics, polystyrene foam, etc.
Properties
Ingredient mixing ratio: 1:1 (by volume and weight)
Initial colour: clear
Final colour: clear
Viscosity (after mixing): 5000–10000 mPa.s
Working time (to gelation): ca. 5 min (20 °C to 25 °C)
Handling of glued parts: after 15–20 min
Half strength: after 10–15 min
Full strength: after 2–3 h
Full cure: 16–24 h
Shear strength: 20 N/mm²
Temperature resistance of bonded joint: -40 °C to +120 °C
Removal of excess uncured adhesive: cloth or paper towel moistened with denatured alcohol.
Thinner: S6300 epoxy thinner (the use of thinners increases the curing time and reduces the final strength of the joint - if you need a "thinner" epoxy, use a laminating or finishing epoxy with a lower viscosity).
Use as a sealer, suitable fillers: microballoons, talc, baby backfill, diatomaceous earth, fine balsa or lime sawdust, chopped fibreglass. Caution - the addition of filler may reduce working time by up to 25% and (depending on the type and amount of filler used) may reduce joint strength.
Suitable for bonding: softwood and hardwood, chipboard, plywood, metals, polystyrene foam, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres.
Not suitable for bonding: soft and flexible plastics (incl. EPP and EPO), polyethylene, Teflon.
Storing: in a tightly sealed container, in a cool, dry and dark place (at a temperature of 10 °C to 25 °C). Do not expose to temperatures below 10 °C. Take care not to confuse the resin and hardener caps - even a small amount of hardener can degrade large quantities of resin.
Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year while maintaining the above product properties. Practical experience shows that epoxy resins based on bisphenol A and epichlorohydrin maintain their excellent properties for many years when stored correctly (see also Note 2) - if you buy a pack of adhesive appropriate to your consumption, you do not have to "worry" about its lifetime at all.
Note 1: the curing of the adhesive depends mainly on the ambient temperature; if you mix larger quantities of epoxy at a time (typically more than 20–30 g) it can cure much faster - to maintain longer working time, the adhesive needs to be cooled, e.g. in a water bath. This is because heat is released when the resin and hardener react, and also because the resin cures faster at higher temperatures. And since the mass of the resin (and therefore the amount of heat generated) increases faster than the size of the external surface from which heat is dissipated to the surroundings as the volume increases, more resin is heated and cured faster. Don't you believe it? Believe. A 1 cm cube has a volume of 1 cm³ and a surface area of 6 cm² - a 6:1 ratio, while a 2 cm cube has a volume of 8 cm³ and a surface area of 24 cm² - a ratio of only 3:1.
Note 2: originally clear and quite flowable epoxy resins based on bisphenol A and epichlorohydrin can sometimes thicken ("curdle" like bee honey) and lose transparency - this is due to exposure to low temperatures, humidity or time. By gently heating it in hot water (60–70 °C) for a few minutes until the resin becomes clear again in its entire volume, you will get the resin "as new" again, with its original properties.
The product contains substances classified as hazardous within the meaning of Regulation (EC) No 1272/2008. For detailed information see the section "Downloads".


temporalmente fuera de stock
temporalmente fuera de stock

Comentarios

Clientes que compraron este producto, también han comprado
Ciano KAVAN Thin 20g
Ciano KAVAN Thin 20g

temporalmente fuera de stock
temporalmente fuera de stock

Tensor de riostras M2,5x32/48 (2pcs)
Tensor de riostras M2,5x32/48 (2pcs)

temporalmente fuera de stock
temporalmente fuera de stock

Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
    Cianocrilato->
    Epoxy->
      EMC-Vega
      KAVAN
      Loctite
      Resoltech
      Epoxy BSI
      Epoxy R-G
    Resinas/Gelcoat
    Microbalones
    Pegamento contacto
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Motor DLE 200cc Premium Muffler
2 x Silent-blocks DLE 170M
1 x Corona grade autoarranque DLE-170M
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Equilibrador hélices
1 x Soporte para aviones SebArt
2 x Bisagra de nylon 15x0,3 (10 pcs)
1 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Medidor de incidencias
1 x Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x CC 05
1 x Varilla acero Ø 0,8 mm x 1000 mm
1 x CM-3
1 x Taco goma 11 mm (14 pcs)
1 x Pasacable de goma Ø 6.4 mm (4 uds)
1 x Bancada servo gancho
1 x Terminales riostras M3x16 (2 uds)
1 x Kwik link negro largo (10 pcs)
1 x Bayoneta aluminio/strongal D12 mm/0,5 m
1 x Ball link latón BS M3 V1 (10 pcs)
1 x Arandela 2.7 mm (20 pcs)
1 x Prisionero aluminio 4 mm Ø (4 uds)
1 x Conjunto bieleta 80 mm para dirección
1 x Gancho remolque inferior plano
1 x Pasacable de goma 9.5 mm (4 uds)
1 x Arandela abierta 2.6 mm (20 pcs)
1 x Gancho de remolque + 4,5 m
1 x Gancho de remolcador
1 x Terminales riostras M2,5 (2 pcs)
1 x Salida para cables 28x5 mm (2 pcs)
1 x Arandela conica ancha alumino M3 rojo (4 pcs)
1 x Prisionero allen M3x5
1 x Conjunto bieleta 140 mm y rótulas T. para dirección
1 x Prisionero aluminio 6 mm Ø (4 uds)
1 x Pasacable de goma Ø 4 mm (4 uds)
1 x Arandela 1.7 mm (20 pcs)
1 x Terminales de mando o arriostrado aluminio rojo M3, 4 mm (4 pcs)
1 x Fuente Alimentacion eFuel 30A
1 x Circlick para eje 1.5 mm (10 pcs)
1 x Prisionero aluminio 3.5 mm Ø (4 uds)
1 x Cierre cabina V1 M3 Rojo (2 pcs)
1 x Bayoneta aluminio/strongal D35 mm/1 m
1 x Arandela de bloqueo 1.5 mm (10 pcs)
1 x Prisionero aluminio 2 mm Ø (4 uds)
1 x Salida para cables 38x4,5 mm (2 pcs)
1 x Circlick para eje 1.2 mm (10 pcs)
1 x Prisionero allen M4x4
1 x Carga cohete D9-7
1 x Combo RAY C3542-1000 + ESC 60A
1 x AXI 2217/20 V2 Long "F5J"
1 x Motor A60-6XS V4 28-pole kv370
1 x Disipador motor tipo 150
1 x Disipador radial para motores MPJ AC 25/35-xx
1 x Motor A20-26 M EVO
1 x Micro Cristal RX 35.120 Ch 72
1 x Set Radial para Hacker A40
1 x Soporte ventral para Speed 280
1 x Combo FOXY C3530-700 + FOXY 80 amp
1 x Motor A10-7 L 4,4:1
1 x AXI 2814/16 V2 Eje largo
1 x Set Radial para Hacker A30-S
1 x Cables para el motor AC 28/7
1 x Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Bancada motor HACKER A60 aluminio
1 x Bancada motor HACKER A50 aluminio
1 x A60-6XS V4 28-Pole
1 x Eje para motor Hacker A20-S (3 uds)
1 x Bujía Champion RCJ-7Y para ZG
1 x Pipa bujía DLE-111
1 x Bujía motor OS nº 8
1 x AXI 2826/8 V2 Eje largo
1 x AXI 2826/8 V2
1 x AXI 2808/16 V2 Eje largo
1 x AXI 2808/20 V2
1 x Cable simulador USB multiplayer
1 x AXI 2808/24 V2
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x AXI 2814/16 V2
1 x Disipador axial para motores MPJ AC 25/25-xx
1 x AXI 2820/12 V2 Eje largo
1 x Soporte de motor para FunJet (Multiplex)
1 x Eje para motor Hacker A40 L 8-Polos Turbina eléctica
1 x Disipador motor tipo 280
1 x AXI 2808/20 V2 Eje largo
1 x AXI 2814/12 V2 Eje largo
1 x Motor B20-15 L + reductora 4:1
1 x Bancada receptor (Azul)
1 x Soporte frontal para Speed 400/480
1 x Sistema de paso variable 3D Indoor
1 x Disipador para motor Hacker B 20 (o motores hasta Ø20 mm)
1 x Motor A30-10 XL V4
1 x Backmountset complete A40
1 x Recambio lonas Hovercraft
1 x Tarjeta programadora KAVAN PRO
1 x Motor A30-12 L V4
1 x AXI 2217/16 V2 Long
1 x Mig-29 "FULCRUM" (RBC Kits)
1 x Motor A20-20 L EVO
1 x AXI 2212/26 V2
1 x FOXY G2 C3530-700
1 x AXI 2820/8 V2 Eje largo
1 x Motor A50-14 L 8-Polos Turbina eléctica
1 x AXI 2814/20 V2
1 x Interface Jack Adapter IKARUS
1 x Motor A40-10 L V2 14-Polos Glider
1 x Motor DLE 200cc Std
1 x Gafas Zurich Sport Sunglasse Dark Sensity BROWN
1 x Soporte filtro FESTO (4 pcs)
1 x Soporte Angular conector XT-60 (2 pcs)
1 x Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x Bisagra de nylon 20x20x0,3 (10 pcs)
1 x Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
1 x Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x Bisagra larga con pin metalico (6 uds)
1 x Bisagra de nylon 20x15x0,3 (10 pcs)
1 x Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x Bisagra de compuerta aluminio (1 pcs)
1 x Bisagra Larga flexible (12 uds)
1 x Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x Bisagra Micro flexible (12 uds)
1 x Cargador POWER PEAK D7 EQ-BID 12V/230V-Duo
1 x Soporte para aviones
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Bungee HLG Premium
1 x Soporte conector XT-60 (2 pcs)
1 x Catapulta Vasa model
1 x Cierre cabina
10,454.04EUR
Fabricantes
Información del Fabricante
Kavan
Otros productos
Idiomas
Español English
Monedas