Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock
Sparkplug NGK CM6 temporarily out of stock	Conector BEC female (10 pcs) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	P-47 "Snafu" 96" ARF (2.438 mm)
1 x	P-47 96", Electric retract Landing gear
1 x	P-51D "Old Crow" 89" (2260 mm)
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	TS832 to Gopro AV/Power Cable
1 x	Bateria DJI Mini 2 2250 mAh
1 x	DJI Mavic Air Fly More Combo
1 x	ULTRA STICK 10 cc ARF
1 x	MVVS presuritation conection 26-175 cc
1 x	PARTENAVIA 2020 mm ARC with Flaps
1 x	FW-190 2400mm Electric Landing gear complet (CY model),
1 x	F8F Bearcat #68 2.460 mm
1 x	F8F Bearcat #201 2.460 mm
1 x	PARTENAVIA 2020 mm ARF with Flaps
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Muffler ZG 20
1 x	Stainless Steel Bend D 15x0,4mm
1 x	Digital precision scale up to 2000 g
1 x	Hot Glue Stick BLACK
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Hot Glue Stick GREEN
1 x	Giant Scale Muffler D.A. 150 (2 pcs)
1 x	Solid Headers for Single Cylinder DA-60 Solid 50mm drop
1 x	Ignition module ZG 38/S/SC
1 x	Hot Glue Stick RED
1 x	Silencer kit ZG 45/62
1 x	Canister combo DLE 55 cc
1 x	Crankcase Gasket set for ZG 74 / ZG 80
1 x	Motor UMS Radial-5-150cc gas
1 x	STANDOFF GAS ENGINE MOUNT 38 mm
1 x	Filetro gasoline filter Tillotson OW497
1 x	Rocket D3-P
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x	Motor DLE 20 RA cc
1 x
1 x	Stainless Steel Bend D 18x0,5 mm
1 x	Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x	KS86 S-6 muffler up to 65cc
1 x	Dust collector for mould cleaning
1 x	Muffler ZG 38/S/SC
1 x	90° TUBE-ANGLE Ø 28 mm
1 x	Motor SAITO FG-61 TS
1 x	ZENOAH ZG 26SLH Helicopter Engine
1 x	Motor DLE 35 RA
1 x	Xplorer1 anemometro
1 x	RM-85FSI 4-stroke inline gasoline engine
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Canister combo DLE 120 cc
1 x	Xplorer4 anemometro
1 x	Motor ST 7-160 B
1 x	Oils Pumps Empty (1 liter)
1 x	Motor Mount for TITAN ZG45 and ZG62, length 36 mm
1 x	Silencer Ring 7-35
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	Stainless Steel Bend D 12x0,4mm
1 x	Gasket carburettor/insulator for ZG 38/S/SC
1 x	Escape Krumscheid 81-6 hasta 55 cc
1 x	Canister combo DLE 120 cc
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	O-ring Saito FG-73 5cyl
1 x	180° TUBE-ANGLE Ø 25 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Pitts Muffler for D.A. 120
1 x	Motor DLE 130 cc
1 x	ZENOAH ZG26 SCM Marine Engine
1 x	PC-21 2880 mm Spinner 5Blade red
1 x	Bags de Luxe ASPIRE
1 x	MIRAGE 2000 Camuflage PNP
1 x	Tank Kevlar ASPIRE 6 L Kero
1 x	FELIX SportJet Blue/Green 2200 mm
1 x	VIPER 1.7 Electric break wheels + structure
1 x	Bags wings/rudder ASPIRE
1 x	MB339 Freece PNP 1790 mm
1 x	ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x	SCHOCKJET ARF 2.050 mm
1 x	VIPER JET G2 Esq. 2 White/Red
1 x	Round Rod 1,5x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	Propeller Pleg CAM-Prop 10x6 + Spinner
1 x	HAWKER HUNTER 1:5,8 Desert (1.770mm)
1 x	BOEING 727 kit
1 x	BOEING 727, Electric brake 28mm + controller
1 x	VIPER JET G2 Esq. 2 Red/White/Silver
1 x	VIPER JET G2 Esq. 3 Orange/Black
1 x	F4E Phantom Scale 1:7
1 x	FELIX SportJet Blue 2200 mm
1 x	BD-5J ARF+
1 x	L-39 Albatros 1:4.75, Electric retract landing gear
1 x	VIPER SL Thunderbird PNP 2270 mm
1 x	VIPER JET G2 Esq. 5 Green/White/Blue
1 x	F-16 Scale 1:6 (1.630mm)
1 x	FELIX SportJet Yellow 2200 mm
1 x	FELIX JR Yellow/Black 1750 mm
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	BOEING 727, Retract set for Boeing 727
1 x	Baering 3x8x4
1 x	Blade Holder Full (4 blades)
1 x	Head lower part New
1 x	Blade Holder (3 blades)
1 x	Screws flush mount M2
1 x	Nut M2 securing
1 x	Focke Wulf FW-190A-8 93", Electric retract Landing gear
1 x	ZERO Figther A6M52 93", Electric retract Landing gear ELECTRO
1 x	Focke Wulf FW-190A-8 93", Spinner 3Blade Scale
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Mudguard for 140/165 mm wheels
1 x	Stinson Reliant Yellow/Blue 2910 mm
1 x	Spare Part Frame Set for EACHINE RACER 250
1 x	O-Ring SAITO FG-60 R3
1 x	Receptor FUTABA R7006SB FASSTest/FASST
1 x	Trainer Jet Intro yellow/blue/navy

63,046.90EUR