Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Vasa model Catapult
2 x	PARTALL® Hi-Temp Wax, 340 g
2 x	Plasti Dip Liquid Tape 429 ml black
2 x	Painting GHT Lexan Black 150 ml
1 x	Universal Colour Paste deep black 50 g
2 x	Solvent Plasti Dip 1000 ml
2 x	Bungee HLG Premium
1 x	Nitroverdu 500 ml
1 x	Release wax 250ml
3 x	Plasti Dip Liquid Tape 429 ml black
1 x	Presto SF Light Filler styrene-free (420 g)
2 x	Spannlack 1000 ml
1 x	500 ml sealer (DOPE)
1 x	Paint gun for sprays
3 x	1000 ml sealer (DOPE)
2 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Spray adhesive AEROFIX 2
1 x	Universal Colour Paste white 50 g
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Premium servo extension 75cm
3 x	Futaba Female 40 cm extension
1 x	Piloto Jet "Red" 1/6 Scale
3 x	Prolongador S-Bus JR/JR 20cm
2 x	Premium servo extension 50cm
2 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	200 mm extensión servo HITEC/JR
2 x	silicon 100 cm Futaba Extension Ø 0,35 mm
2 x	1/12 Pilot "Cougar"
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	Extension silicon 10 cm (Graupner)
1 x	Prolongador S-Bus JR/JR 10cm
2 x	1/12 Pilot "Langley"
3 x	Civilian pilot "Gramps" size 9cm (Slimline)
2 x	Extension silicon 30 cm female (Futaba)
2 x	Futaba Female 40 cm extension
3 x	Extension silicon 10 cm (Futaba)
1 x	1/4 Pilot "Heidi"
2 x	1/6 Pilot "Tony"
1 x	1/7 Pilot "Japanese"
4 x	Extension silicon 100 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
2 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	1/6 Pilot "John"
1 x	Extension silicon 30 cm male (Graupner)
3 x	Extension 100 cm (Futaba)
1 x	Extension silicon 30 cm female (Graupner)
2 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
2 x	1/10 Pilot "Jimmy"
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	Straightened threaded rod M2-1m
2 x	Horn 16,5x20 mm (2 pcs)
3 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	Threaded coupler ALU M2 Ø 3 (2 uds)
2 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Horn 20x28,5 mm (2 pcs)
2 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
2 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	SlowFlyer control horn (3 pcs)
1 x	RH long aluminium horn (2pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
2 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Brass control horn M3 short for wire (2 pcs)
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
2 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
3 x	ABS tube 14.0x10.0x1000 mm
2 x	Carbon fiber rod 8.0 mmx1000 mm
3 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
3 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Windsock Ozone L -1200 mm
1 x	Cockpit plastic closing
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Hovercraft sailcloth
1 x	Initior Receiver FRX2 Wireless
1 x	Ventral support for AX-18/AX-60
2 x
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Actuador lineal HLS12-100210-7.4v
2 x
2 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
2 x	Hardener Aero EPH 161 (250 g)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	1/10 Pilot "Jack"
1 x	Circlick securite
3 x	Extension silicon 75 cm (Graupner)
2 x	Pilot "Anthony" (Slimline)
1 x	Cable S.BUS 3 salidas 300 mm
2 x	Extension 7.5 cm
2 x	Pilot JAN 1/4 Saiplanes
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	Extension S-Bus 1-2 silicon 120 cm FUTABA
2 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th
2 x	Extension 30 cm (Futaba)
2 x	Extension silicon 25 cm (Graupner)
1 x	Extension silicon 75 cm (Futaba)
1 x	Extension PVC 150 cm (Graupner)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Extension 15 cm (Futaba)
2 x	Extension 90 cm (Futaba)
1 x	Motor brushless 1806 - 2300 Kv Cuadracopter
2 x	1/6 Pilot "Buddy"
1 x	Buy Perforated film 100 cm / 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	1/6 Pilot "Garry"
1 x	Buy Perforated film 145 cm / 50 m
1 x	Cabel "Y" 15 cm
1 x	Cabel "Y" 30 cm (graupner)
2 x	Small aluminium horn red (2pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	LH long black aluminium horn L31xH30 (2pcs)
2 x	Cable with accesories
1 x	Control horn long w/ball
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Horn DUBRO 1/2A
1 x	Short adjustable control horn 3x24
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	ABS tube 8.0x6.0x1000 mm
2 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Power supply NT 25 Amp.
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	20 mm carbon horn
1 x	ABS tube 3.0x2.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	Horn 5/20 with M2 Bearing
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Horn with ball 55x40
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	460 mm EPP Floats
1 x	resin-hardener L-385 H-385 (625 g)
1 x	Hobbylite Filler, Balsa colour
1 x	Universal Colour Paste deep black 250 g
2 x	Combo 4 pcs AXI 2204 Multicopter
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m
1 x	Epoxy Resin L + Hardener LT kit/ 3125g
1 x	Extension silicon 50 cm (Futaba)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Extension silicon 25 cm (Futaba)
1 x	ESC ALPHA 60A HV
1 x	1/4 Pilot "Mike"
1 x	Piloto JET 1:3,5
1 x	AXI 2204 Multicopter
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 50m
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	Hardener P-25, canister 2.5Kg
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x	Mould Resin P 10 kg
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	5 mm M2 variable horn
1 x	Bidule 170 ARF 3.48 m
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	Sebart 2.2 m YELLOW/BLACK (SebART)
1 x	Bidule 55 2460 mm Cabina
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	Bidule 111 3000 mm
1 x	Adjustable brass horn threaded M3
1 x	Long adjustable aluminium control horn with bearing 2,8x15
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x	Glow Plug Clip 1.3 Ah
1 x	Fuel bottle 500 ccm
1 x	Microbalon filler for CA glues. Packaging bottle 20g
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	EDGE 540-A 74" (1880 mm)
2 x	Fiberglass tube 6/4x1000mm
1 x	Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Straightened rod Ø 6.0 mm x 1000 mm
2 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
2 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
2 x	Retract undercarriage

15,944.35EUR