Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

3 x	Bayoneta aluminio/strongal D25 mm/1 m
3 x	Varilla acero Ø 1,0 mm x 1000 mm
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
3 x	Varilla acero Ø 1,5 mm x 1500 mm
2 x	Varilla acero Ø 2,5 mm x 1000 mm
2 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
2 x	Bayoneta aluminio ø30×1 mm x 1m
4 x	Varilla acero Ø 2,0 mm x 1000 mm
2 x	Varilla acero Ø 4,5 mm x 1000 mm
2 x	Varilla acero Ø 5,0 mm x 1000 mm
2 x	Varilla acero roscada M3 -1m
1 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
2 x	Bayoneta aluminio/strongal D12 mm/0,5 m
2 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Modulo PPM Encoder
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
2 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Sensor digital Air Speed con Pitot
2 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1000 mm
2 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Borde Salida BALSA 35x8x1000 mm
1 x	Listón de CAOBA 3,0x3,0x1000 mm
1 x	Listón de PINO 2,0x2,0x1000 mm
1 x	Gorra Jeti Negra
1 x	Liston de BALSA 6,0x6,0x1000 mm
1 x	Listón de PINO 1,5x3,0x1000 mm
1 x	Listón de TILO 3,0x3,0x1000 mm
1 x	Listón de PINO 6,0x6,0x1000 mm
2 x	Bisagra Larga flexible (12 uds)
3 x	Bisagra 18 mm reforzada
1 x	Bisagra Micro flexible (12 uds)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm (2 pcs)
1 x	Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
2 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x	Bisagra pequeña con pin metalico (12 uds)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
2 x	Bisagra de Flaps (6 uds)
2 x	Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
2 x	Bisagra de aluminio tipo PIN 4,5x70 mm kit (2 pcs)
2 x	Bisagra de compuerta/Flaps
1 x	Horn corto de latón M2 para cable (2 pcs)
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Horn de mando 5/10 con rótula M2
1 x	Horn aluminio pequeño amarillo (2pcs)
2 x	Horn aluminio pequeño rojo (2pcs)
1 x	Horn corto de latón M4 para cable (10 pcs)
2 x	Horn de mando carbono 20 mm
2 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn de mando 6/35 con rótula M3
2 x	Horn corto de latón M4 para cable (4 pcs)
1 x	Horn aluminio pequeño azul (2pcs)
2 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn aluminio LH largo L31xH30 (2pcs)
1 x	Acople ALU M2,5 Ø 4 (2 uds)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Horn corto de latón M3 para cable (2 pcs)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Horn control flaps (1 pcs)
3 x	Horn con ball 55x40
3 x	Horn aluminio RH largo (2pcs)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Cable con accesorios
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn de mando 6/20 con rótula M3
1 x	Horn de mando 5/20 con rótula M2
1 x	Horn de mando 6/27 con rótula M3
1 x	Conjunto de mandos arriostrados
1 x	Acople ALU M2 Ø 3 (2 uds)
2 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Helice APC 12x8 SF
1 x	Cable servos silicona 0,50 mm2 Graupner (100 m)
1 x	CC 02
1 x	Silent-blocks DLE 170M
1 x	Soporte FUEL DOT V3
2 x	Varilla acero Ø 6,0 mm x 1000 mm
1 x	PIX Hawk con accesorios
1 x	Soporte conector XT-60 (2 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Soporte grifo FESTO (2 pcs)
3 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Varilla acero Ø 14,0 mm x 1000 mm
2 x	Varilla latón hexagonal Ø 3.5 mm x 1000 mm
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Tubo Pitot para PIXHAWK
1 x	Listón de CAOBA 1,5x1,5x1000 mm
1 x	Listón de BALSA 3,0x3,0x1000 mm
1 x	Liston de BALSA 2,0x10,0x1000 mm
1 x	Listón de HAYA redondo 2,0 x 1000 mm
1 x	Listón de HAYA redondo 3,0 x 1000 mm
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Listón de HAYA redondo 10 mm x 1000 mm
1 x	Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x	Bisagra de compuerta aluminio (1 pcs)
1 x	Bisagra de compuerta 30x16 mm (2 pcs)
1 x	Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra 15 mm reforzada
1 x	Bisagra pin 39x20 mm (10 uds)
1 x	Bisagra larga con pin metalico (6 uds)
2 x	Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x	Bisagra PIN mediana (12 uds)
1 x	Bisagra cilíndrica 67 mm Ø 5 mm (4 pcs)
1 x	Bisagra pequeña con pin metalico (6 uds)
2 x	Bisagra papel CA (12 uds)
1 x	Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm (2 pcs)
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x	Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x	Bisagra de nylon 15x0,3 (10 pcs)
1 x	Bisagra PIN 4.7 mm (5 pcs)
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
1 x	Horn con ball 40x30
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Reenvío de Profundidad 90x28 mm "tipo Kato"
1 x	Horn de mando pequeño ajustable aluminio con rodamiento 2,8x15
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	VIPER JET G2 Esq. 5 Verde/Blanco/Azul
1 x	VIPER JET G2 Esq. 4 Rojo/Blanco/Plata
1 x	OPUS V/JET con 4 flaps + color brillante
1 x	Set DECO Ultimatum 2.0 - Andy Folienwelt
1 x	Bayoneta aluminio/strongal D35 mm/1 m
1 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	VIPER JET G2 Esq. 3 Naranja/Negro
1 x	Patas + Ruedas con frenos eléctricos VIPER 1.7
1 x	Pipa VIPER 1.7 + Deposito 1500 ml
1 x	Aro soporte P-20 OPUS V-Jet 60mm
1 x	Hélice plegable CAM-Prop 8x6
1 x	Bisagra 25 mm reforzada
1 x	Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)

8,808.01EUR