3 x | Aluminum Bayonet / strongal D25 mm / 1 m |
4 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
3 x | Straightened rod Ø 1.5 mm x 1500 mm |
2 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
2 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
4 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
3 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
2 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | PPM Encoder Module |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1000 mm |
3 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Jeti Black cap |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Large flex hinge (12 uds) |
3 x | 18 mm reinforced hinge |
1 x | Micro flex hinge (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Flap hinge (6 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | Gates hinge |
2 x | Brass control horn M2 short for wire (2 pcs) |
2 x | 6 mm aluminium horn with patella |
2 x | Horn 5/10 with M2 Bearing |
2 x | Small aluminium horn gold (2pcs) |
2 x | Small aluminium horn red (2pcs) |
1 x | Brass control horn M4 short for wire (10pcs) |
3 x | 20 mm carbon horn |
2 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | Horn 6/35 with M3 Bearing |
3 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Small aluminium horn blue (2pcs) |
3 x | SlowFlyer control horn (3 pcs) |
2 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
2 x | Horn for flap control (1 pcs) |
3 x | Horn with ball 55x40 |
4 x | RH long aluminium horn (2pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Cable with accesories |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | Horn 6/20 with M3 Bearing |
2 x | Horn 5/20 with M2 Bearing |
2 x | Horn 6/27 with M3 Bearing |
2 x | Cable control set |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Propeller APC 12x8 SF |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | CC 02 |
1 x | Silent-blocks DLE 170M |
1 x | Support FUEL DOT V3 |
3 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | PIX Hawk with accesories |
1 x | Support XT60 conector (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
4 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
2 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Long pinned hinge (6 uds) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Small pinned hinge (6 uds) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | Horn with ball 40x30 |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | VIPER JET G2 Esq. 2 Red/White/Silver |
1 x | OPUS-V / Jet-CC-BF |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | VIPER JET G2 Esq. 3 Orange/Black |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Propeller Pleg CAM-Prop 8x6 |
1 x | 25 mm reinforced hinge |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Long adjustable control horn 3x34 |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Long adjustable control horn with bearing |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Small adjustable control horn with bearing |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Short adjustable control horn 3x24 |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Small control horn with bearing (2 pcs) |
|
9,071.43EUR |