25.00EUR

USB programador GO servos
[KAV20.0001]


USB programmer/interface for programming KAVAN GO digital servos of the GO-10xx/11xx/12xx series with the help of a convenient PC operating program for Windows XP, Vista, 7, 8, 10 (32/64bit).

USB interface - KAVAN GO-10xx/11xx/12xx series servo programmer. By using the computer monitor as a user interface, you have a programming and testing tool with comfortable operation. During programming the servo is powered from the USB port of the computer to which the programmer is connected. All parameters are first set in a window on the screen and then loaded into your servo. The operating program can be found in the "Downloads" section.
System requirements for using the programmer
Power supply: USB (5 V/500 mA)
Operating system: Windows® XP/Vista/7/8/10 (32/64bit)
USB port: USB 2.0
Compatible Servos: KAVAN GO-10xx/GO-11xx/GO-12xx series
Programmable functions

Servo angle: Used to set the maximum travel of the servo. Default setting is approx. 120° at normal control pulse width range (900~2100 µs); approx. 180° at maximum allowed control pulse width range (500~2500 µs).
Servo Neutral: Used to set the neutral (center) position of the servo.
Damping Factor: Sets the servo's stopping behavior characteristic.
PWM Power: Sets the output power of the servo. As higher the value is, the faster the servo is and the more thrust it has - of course, the current draw will be proportionally higher. Range: 39.2~100%
Sensitivity: Adjusts the sensitivity (insensitivity bandwidth) of the servo. The higher the value - the narrower the insensitivity bandwidth - the servo will only move if the change in control signal width is greater than the insensitivity bandwidth. Setting the sensitivity value too high can cause the servo to oscillate in some applications. Range: Ultra High (Extra High - sensitivity bandwidth approx. 1 µs) - High (High - approx. 2 µs) - Medium (Medium - approx. 3 µs) - Low (Low - approx. 4 µs) Soft start: Enables/disables the soft start function. This function prevents the servo from abruptly moving into the operating position after power is turned on, thus reducing the risk of damage to the servo gears.
Inversion: Reverses the sense of servo movement.
FUTABA SR mode: Used only with FUTABA RC system working in SR mode. Do not turn this option on if you are using a different FUTABA RC system setting or any other brand of RC system.
SANWA SSR mode: Used only with SANWA RC system working in SSR mode. Do not turn this option on if you are using a different SANWA RC system setting or any other brand of RC system.
Fail-safe: If the control signal from the receiver is completely lost or if the servo cannot detect the signal properly (e.g. due to interference), the servo may enter one of three fail-safe modes:
(a) Free: Fail-safe is disabled.
(b) Maintain Position: the servo maintains the position corresponding to the last correctly received signal.
(c) Transition to neutral: The servo returns to the neutral (1500 µs pulse width) position.
Overload protection: enables or disables servo overload protection in three levels - once the overload has lasted for a preset time (in seconds), the servo output power is limited to the corresponding preset value (in % of max power).
Reset: Restores the connected servo to its factory default settings.
The programmer kit includes: programmer GO servos, manual.


enought units
enought units

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Ferrita con funda
1 x Ferrita 17x10x6.5 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x ARAMID honeycomb 1300x2600x2 mm
2 x Vacuum bag, 1200 mm x 50 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon roving DowAksa / 24k / 1600 tex
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Bungee HLG Premium
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension 15 cm (Futaba)
1 x Paramotor Trike XL
1 x Banna gold connector 2,5 mm (M/F)
2 x Flat Connector 4.0 mm x 1000 mm
1 x Stickers-digit for marking
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
2 x Softshell Hispano Aviación
1 x ABS 500 x 400 x 2,0 mm (white)
1 x Support FUEL DOT V3
2 x Propeller diller for EME35 and DLE35
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
2 x DLE 55 carburetor
1 x Sparkplug ROSSI R8
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x Giant Scale Muffler D.A. 70
2 x Sparkplug 1/4-32 Glow
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
2 x Sparkplug 1/4-32 EVO 10GX
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Panel Honeycom carbon 350x150x3.5mm
1 x Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x Selfstarr EME35
1 x Fiberglass plate 620x540x2,0 mm
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x Starter EM Gear Power 80
2 x Film release agent PVA 25 ml
1 x Electric Fuel Pump 12v
1 x Servo GO-02 Digital 1.8g
1 x Servo GO-1280 MG 40 kg.cm 0.085s/60º
1 x Servo GO-1088MGW 74 kg.cm 0.125s/60º
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x Jeti Box mini
1 x Jeti Advance Pro Program Card
1 x JetiBOX
1 x Servo GO-1013 MG 3.8kg
1 x Servo Robbe FS 525 BB MG HV
1 x Servo GO-1053 MG 20.0kg
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Jeti Advance Plus Program Card
1 x Hacker X-Pro USB interface V2
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x 10-15mm Servo Arm
1 x 90x75 mm standart servo cover
1 x 18 mm wing servo holder
1 x Ferrita 27x14x7 mm
1 x Vest clothes Hispano Aviación
1 x Program 5v SIO RS 232
1 x 57 mm micro-mini servo cover
1 x Servo Controller Fibra optica
1 x Servo TOPMODEL DS9010 T
1 x 10-15mm Servo Arm HITEC
1 x IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x Propeller CFK 14.5x10 Slim
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 50m
1 x Propeller CFK 13x7.5
1 x Propeller CFK 15x15
1 x Propeller CFK 12.75x13
1 x Foam plastic plates (310x210x2 mm)
1 x Fiberglass plate 350x150x3.0 mm
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Tacometer mini ignition RCEXL
1 x Sparkplug DLE CM6
1 x Reed valve for DA 50-R
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Spark motor OS Type F
1 x Excentric gearbox for 2,0mm axis (5,0:1)
1 x Excentric gearbox BB for motor 600, 3,2mm axis (1,75:1)
1 x STD excentric gearbox for 2,3mm axis (3,0:1)
1 x Excentric gearbox for 3,2mm axis (4,1:1)
1 x Excentric gearbox for 2,3mm axis (3,5:1)
1 x Planetary gearbox(3,8:1)
1 x Propeller CFK 14x8
1 x Propeller CFK 18x19
1 x Fiberglass 5000x1100 mm 49 g/m²
1 x Propeller CFK 18x16
1 x Foam plastic plates (310x210x3 mm)
1 x Fiberglass plate 350x150x1.0 mm
1 x Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x Propeller RF CFK 13x6.5
1 x Propeller CFK 13x9
1 x Propeller RF CFK 16x8,5 S
1 x Propeller CFK 11x8
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x Suction funnel for carburetor 90D-L (red)
1 x DLE 111 pipe plug
1 x Spark plug key NGK MVVS
1 x Sparkplug NGK CM6
1 x Blocking screws M6 gas engine
1 x Spark motor OS nº 3
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Extension Arm for Carburetor (red)
1 x SAITO FG-36 carburetor
1 x Filler Gauges
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x Distanzstück motor OS 120 AX
1 x Spring Clip Ø25 mm
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Propeller diller for DA50, DLE55 red
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Hose clips 6 mm
1 x Pitts Muffler kit for CAP 21
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Adapters for 7.5 - 35cc aircraft and naval engines
1 x DA 85 / DA 100 / DA 100 L carburetor
1 x Junta humo metalica G30 (DLE30/DLE60)
1 x EME 55 cc carburetor WALBRO
1 x Extension Arm for Carburetor
1 x Propeller diller for DLE111 and DA85-150
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Propadapter for motor A50
1 x Propadapter for motor A60-V2
1 x O-ring Saito FG-73 5cyl
1 x Bujia OS G5 gasolina
1 x Propadapter for motor A50-V3
1 x DLA 116 crankshaft
1 x Suction funnel for carburetor 90D-M (red)
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Excentric gearbox for 3,2mm axis (3,0:1)
1 x STD excentric gearbox for 2,0mm axis (3,75:1)
1 x Excentric gearbox BB for motor 600, 3,2mm axis (2,33:1)
1 x Planetary gearbox(3,8:1)
1 x STD excentric gearbox for 2,0mm axis (5,0:1)
1 x Planetary gearbox(3,33:1)
1 x Planetary gearbox(3,33:1)
1 x STD excentric gearbox for 2,0mm axis (4,5:1)
1 x Excentric gearbox for 2,0mm axis (4,5:1)
1 x Planetary gearbox(3,33:1)
1 x Planetary gearbox(3,33:1)
1 x Excentric gearbox for 3,2mm axis (3,5:1)
1 x Excentric gearbox for 2,0mm axis (3,75:1)
1 x Excentric gearbox BB for motor 600, 3,2mm axis (2,8:1)
1 x Planetary gearbox(3,8:1)
1 x Excentric gearbox for 2,3mm axis (2,33:1)
1 x STD excentric gearbox for 2,0mm axis (4,5:1)
1 x Excentric gearbox for 2,3mm axis (4,1:1)
1 x STD excentric gearbox for 2,0mm axis (5,0:1)
1 x STD excentric gearbox for 2,3mm axis (2,33:1)
1 x Planetary gearbox(3,8:1)
1 x MZ-12, 6 Channel HoTT
1 x Propeller G-Sonic 20x8
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Aluminium sheet 500x250x0,5mm
1 x Conector MT-60 (pair)
1 x Black "FUEL VENT" round aluminum overflow socket
1 x ProgBOX MASTER Hacker
1 x Lipo RAY 2200 mAh 2s 7.4v 30C
1 x Propeller FOXY 34x12 2-Bl
1 x 290 mm M4/M4 6.0x4.0 mm shaft ship
1 x 290 mm M4 7/8x212 mm shaft ship
1 x Propeller CFK 16x13
11,868.10EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies