129.90EUR

SAVAGE Max Red 1080 mm
[KAV02.8026]


A builder’s kit of 3D aerobatic park-flyer (1080 mm wingspan) made of virtually unbreakable thoroughly carbon reinforced EPP foam for 350-500W brushles motors. Symmetrical wing section, flat, large area fuselage for great 3D/knife edge handling. Aileron, elevator and rudder control.
SAVAGE MAX is a high performance 3D aerobatic park-flyer made of virtually unbreakable EPP foam for 350-500 W brushless motors. A couple of hours with a bottle of cyano are all you need to finish this model capable of classic pattern aerobatics as well as all 3D stunts! SAVAGE MAX is not just for skilled pilots; on small rates she could be flown by any Sunday flyer who already knows how to do a loop, stall turn and roll. And if something (or your fingers on sticks) goes wrong, thanks to the low all-up weight there usually is not much damage - and even if so, the EPP foam is so easy to repair!
The all-in-one wing EPP foam wing with symmetrical wing section is reinforced with a pair of carbon spars; the pre-cut bays are ready for your servos, indeed. The horizontal part of the fuselage is thoroughly reinforced by a web of carbon spars; the large area vertical part of the fuselage makes the knife edge easy. The plywood firewall is anchored to the foam fuselage with carbon spars as well; the pre-cut bays are ready to accommodate the elevator a rudder servos. The empennage is also made of the EPP foam; halves of the all-moving horizontal tailplane are glued to a carbon tube that rotates freely in 3D printed bearings in the fuselage. The control surface linkage is made of 3D printed horns, plastic clevises and short carbon or steel push rods. The carbon main undercarriage with lightweight foam wheels and EPP pants is secured by 4 bolts to a fibreglass plate anchored to the fuselage with 3D printed plastic holders. The steerable tail wheel assembly consists of 3D printed bracket and lightweight foam wheel.
You will need at least a four channel RC set; a computer radio featuring dual and exponential rates is strongly recommended.
SAVAGE MAX of a Sunday flyer would work nicely with analog micro servos with metal gears like KAVAN GO-13MG, Hitec HS-65MG etc. If you are serious about aerobatics even a little bit, you should go for high speed & torque digital servos like KAVAN GO-1013MG, Hitec HS-5065MG or similar.
We recommend KAVAN PRO 3536-1000, FOXY 3536-1000, Model Motors AXI 2814/16 V2 or similar brushless motors with the APC 11x4.7SF propeller if 3S LiPo battery was used or the APC 10x4.7SF with 4S LiPo.
At least 40A speed controller featuring a powerful switching BEC should be used - especially when high speed & torque digital servos are installed - like the KAVAN PRO-40SB or KAVAN R-50SB.
You can use 3S or 4S LiPo LiPo flight pack 1300-1800 mAh at least 40C.
Designed and manufactured in the Czech Republic.
The kit contents: printed parts of fuselage, wing, tail and wheel pants cut of EPP foam, plywood firewall, carbon spars, 3D printed plastic parts, horns, clevises, push rods and other small accessories, carbon undercarriage with light foam wheels, illustrated step-by-step instruction manual.
Wing span [mm] 1080
Length [mm] 1200
Weight [g] 850
Controlled functions S,V,K(2),M
Build difficulty S2
Operating difficulty P2,P3


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x T-shape holder metal LAMA
1 x Flybar support metal LAMA
1 x Big-Malibu XL Roof box with surfboard rack GREY
2 x Ciano KAVAN Super Thin 20g
1 x Electric Fuel Pump 12v
2 x Battery LiPo GRE18 600 mAh 7.4v
2 x 
1 x Cable coupler M2 (10 uds)
1 x Glidder Mü13e (Bergfalke)
1 x BABY glider drawings (Aero-naut)
2 x Round Rod 1,25x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x ABS Strip 1.5x2.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Propeller POWER-PROP 7x7
1 x Strip 2,0x2,0x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x ABS Strip 1.5x4.0x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Pin hinge 34x16 mm (10 uds)
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Ciano KAVAN Thick 20g
1 x BETA 1400 ARF Red
1 x Glow Plug Clip 1.3 Ah
1 x Adaptadores carga 6s JST-XH
1 x SKY RC T400Q Charger 4x100w
1 x 10 mm aluminium spinner (Kavan)
1 x Brazo servo KAVAN doble aluminio 25T - 2.5" M3
1 x Conector MR-60 (pareja)
1 x Fuel bottle 500 ccm
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Spinner 40 mm Black (Kavan)
1 x Pin hinge 39x20 mm (10 uds)
1 x Glow starter with charger 230v
1 x POLARON EX 800w charger
1 x Engine mounts for .09 - .19 engine
1 x Charger LiPo Charger4
1 x Ciano KAVAN Medium 20g
1 x Charger SKY RC e680
1 x Conector MT-60 (pair)
1 x KAVAN CA Activator 150ml
1 x Combo KAVAN PRO 3542-1150 + KAVAN PRO-80 SB
1 x Ciano KAVAN Thin 20g
1 x BETA 1400 RTF Red
1 x Micro Tarjeta SD Rapid Rush 16 GB
1 x ASPIRE Red ARF 2.000 mm
1 x HAWKER HUNTER 1:5,8 (1.770mm)
1 x CNC FPV Display screen&Transmitter Holder Vertical
1 x LENTUS Multiplex Landig gear retract
1 x SkyMaxx 1.550 mm (kit)
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x Bags de Luxe ODYSSEY
1 x TX 250 mW especial GOPRO
1 x Bags wings/rudder ODYSSEY
1 x Glider IKARUS
1 x ASPIRE Navy ARF 2.000 mm
1 x Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x Bird (Aero-naut)
1 x Fox 4000 mm Airworld,canopy frame
9,304.35EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies