4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Cyano SUPER - GOLD™ THIN (12g)
Cyano SUPER - GOLD™ THIN (12g)

temporarily out of stock
temporarily out of stock

CA Glue (medium) 20g
CA Glue (medium) 20g

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x 80 mm rods set for direction control
2 x Allen wheel collar M4x6
2 x Canopy Lock V1 M3 Blue (2 pcs)
2 x 28x5 mm wires output (2 pcs)
2 x 100 mm rods set for direction control
1 x Allen wheel collar M3x5
2 x Cable grommet 9.5 mm (4 uds)
2 x Aluminun wheel collar 5 mm Ø (4 uds)
2 x Cable grommet Ø 6.4 mm (4 uds)
1 x 41x5,5 mm wires output (2 pcs)
2 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Canopy Lock V1 M3 Red (2 pcs)
2 x 250 mm / 16 mm Airbrakes
2 x 38x4,5 mm wires output (2 pcs)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
2 x Cable grommet Ø 4 mm (4 uds)
2 x Aluminun wheel collar 3 mm Ø (4 uds)
2 x 140 mm rods set for direction control
2 x Aluminium alloy coupler for carbon tube 6/M4
1 x Cable tie mounts 4.3 (4 uds)
2 x 45 mm rods set for direction control
3 x 45 mm rods + T patellas set for direction control
1 x 90 mm rods + T patellas set for direction control
2 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cockpit aluminium closing
2 x 100 mm rods + T patellas set for direction control
2 x Cable grommet Ø 5 mm (4 uds)
3 x Cabin latch Fox MDM1 4m (pair)
1 x Aluminun wheel collar 6 mm Ø (4 uds)
2 x 140 mm rods + T patellas set for direction control
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Allen wheel collar M4x4
1 x Cap closure 33/23.5mm (2 uds)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Allen wheel collar M3x3
1 x Clip mini fixing for wing (2 pcs)
1 x Stickers-digit for marking
1 x Pushrod greyline 3/2 with coupler M2 L: 1000 mm
1 x Split M1,2x10 (10 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Press fitting for 0,5 diam. steel cable (10 pcs)
1 x Fully Threaded Steel Rod M3
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Pushrod greyline 3/2 with coupler M3 L: 1000 mm
1 x One touch canopy lock
1 x Pushrod greyline 4/3 with coupler M3
1 x Snap short M2 (10 uds)
1 x Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x Pushrod octagone 3/2 with coupler M2
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Landing gear frontal support 29x26x13,5
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x Snap long M2 (10 uds)
1 x Snap pin for micro clevis (10 uds)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x White smoke canister 100 g
2 x Ventral support for AX-18/AX-60
1 x White smoke canister 65 g
1 x SE Ring 350 mm (2 pcs)
3 x 
1 x Spikes Band (5 m)
1 x Cinta Goldfix 1m
2 x 20x200 mm battery rings
1 x Steering arm 12 mm Ø 4 mm
1 x STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x Wheel collar 3 mm Ø (4 uds)
1 x Triple rod con. 2mm Pushrod (2 pcs)
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Wheel collar 6 mm Ø (4 uds)
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x SUS wire 3m (nylon coated)
1 x Triple rod con. 3mm Pushrod (2 pcs)
1 x Steering arm 16 mm Ø 4 mm
1 x Window mounting channel 5m
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Wheel collar 3.5 mm Ø (4 uds)
2 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Wing bolts M3 Steel screw Red (2 pcs)
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Wing bolts M6 Steel screw Blue (2 pcs)
1 x 5 mm M2 variable inclined horn
1 x 6 mm M3 variable horn
1 x Horn with ball 40x30
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Horn 20x28,5 mm (2 pcs)
1 x Horn DUBRO 1/2A
1 x Horn 6/35 with M3 Bearing
1 x Horn for flap control (1 pcs)
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Extra long horn 60x30
1 x Brass control horn M2 large for wire (2pcs)
2 x 6 mm red aluminium threaded horn with patella
2 x Horn 5/20 with M2 Bearing
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Horn mando small (2 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x 100m servo "Premium" wire (white/red/blue)
1 x PPM Encoder Module
1 x L-Connector 1.5 mm x 1000 mm
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Horn with ball 55x40
1 x Small aluminium horn gold (2pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Pegamento Pu R 50g polyuretano
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x LA500 freewheel bearing
1 x Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x White smoke bombs AX-9 (10 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Tape GFK 50 mm
1 x AX-60 starters (5 pcs)
1 x Super Light Wheels(Sponge Tyre) Ø 65mm x 19mm (2pcs) axis Ø 3.5m
1 x Green smoke canister 140 g
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Wheel FEMA 140 mm / 6 mm
1 x AX-60 starters (5 pcs)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Red smoke bombs AX-60 (5 pcs)
1 x White smoke bombs AX-60 (5 pcs)
1 x Red smoke canister 140 g
1 x 76x23 Ø3.5 mm aluminium core wheel
2 x Ring 320 mm length (5 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Red smoke canister 100 g
1 x Tape GFK 38 mm
1 x Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm)
1 x SE Ring 300 mm (2 pcs)
1 x Wheel 28 mm
1 x Wheel FEMA 152 mm / 8 mm
2 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 450 mm (2 pcs)
1 x PCARD Wireless System
1 x Foil for sticking flaps and ailerons
1 x 4" - 102 x 45 mm Ø5 mm aluminium core wheel
1 x Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m
1 x Blue smoke canister 140 g
1 x 127x43 Ø6.0 mm aluminium core wheel
1 x Wheel FEMA 112 mm / 6 mm
1 x "S" set for planes
1 x Wheel FEMA 178 mm / 8 mm
1 x Wheel 75 mm with electromagnet and brake disk (2 uds)
1 x Yellow smoke canister 140 g
1 x Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m
1 x SE Ring 400 mm (2 pcs)
1 x Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds)
1 x B4-0 rocket charges (6 pcs)
1 x Blue smoke canister 100 g
1 x 60x25 mm tail wheel "type F3A"
1 x DPSI RV Mini 5 (2008)
1 x Switch magnet for gas cap and magnet switch actuators
1 x Emcotec SPS Magnetic Switch Actuator
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x DPSI Micro - RCS RV
1 x SE Ring HACKER 300 mm (2 pcs)
1 x BATTWIN BATTERY REDUNDANCY SYSTEM
1 x Sparkplug ROSSI R8
1 x Sparkplug NGK CM6
1 x Sparkplug 1/4-32 Glow
1 x Sparkplug Saito 400
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Spark motor OS Type F
1 x DPSI RV Mini 5 Magic
1 x OPTOTRONIX Aurora LCU
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x DPSI V-Match
1 x SE Ring 250 mm (2 pcs)
1 x DPSI OCP Overload protection
1 x GPS, Vario and altitude Sensor SBS-01G
1 x DPSI RV Mini 6 Magic with Gas-Cap switch
1 x Extension for SensorSwitch 30cm
1 x Bujia OS G5 gasolina
1 x PowerBox iGyro SRS + GPS Modul
1 x Rudder forward 80x28 "type Kato"
1 x Horn mando long (2 pcs)
1 x 5 mm gas motor standoff
1 x Micro control horn (2 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Brass control horn M2 short for wire (2 pcs)
1 x RH long aluminium horn (2pcs)
1 x Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x 6 mm M3 variable inclined horn
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Brass control horn M4 long for wire (4 pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x Horn 13,5x16 mm (2 pcs)
1 x Extension silicon 30 cm female (Futaba)
1 x Extension silicon 50 cm (Futaba)
4,874.09EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies