Top » Catalog » Gas. Motor Paramotors » ROIDLE200PM

2,900.00EUR

Motor DLE 200cc Premium Muffler
[ROIDLE200PM]

This engine is not toy. For your own safety, please read the manual carefully before operation. DLE is not responsible for all injuries result from the use.
Thank you for purchasing the DLE engine. DLE200 is a opposed cylinder 2-stroke engine designed for paramotor and UAV. It has unique feature with light weight, long life, high power and low vibration. The design of DLE200 does not use the tuned pipe by routine. It improves the engine's power limit and extends the life of the engine with excellent throttle respond and curve. DLE200, with its new design, will offer you unexpected flight experience.
This engine is not a toy! Therefore, all users who are not specifically skilled or trained to perform the operation or flight should stop the dangerous action and be performed following the help of the experienced.
Misuse or inaccurate maintenance may result in damage of engine, injury or death. Installation, trial run and maintain of the engine must be carried out by experienced. DLE will not be liable for any damage or death caused by misuse or inaccurate maintenance.
This is not a certified aircraft engine. User assumes all risk of use and acknowledges by his use that he knows the engine is subject to sudden stoppage. DLE will not be liable for any damage or death caused through the sudden stoppage in the air.
This engine does not have product liability insurance. We cannot assure the nonoccurrence of the engine failure. Using the engine can be dangerous and accidents can result in serious property loss, injuries or death! Never start the engine if you don't want to take the risks.

Type 2 stroke
Bore 55mm
Stroke 42mm
Displacement 200CC Power ( Premium Muffler ) 23HP/8000rpm
( Standard Muffler ) 20HP/7500rpm
Compression Ratio 10:1
Reduction ratio 1:2.7
Transmission Type Belt
Starting Type Electrical Start
Net Weight (without muffler) 10.3 Kg
Standard Muffler Weight 1.1 Kg
Premium Muffler Weight 2.2 Kg
Spark Plug DLE-8A
Petrol 93# 、97#
Alternator Output 14V 1A
Premium Alternator Output 14V 4A
Propeller 1220mm Applicable Pilot Weight (Premium Muffler) 120Kg
Applicable Pilot Weight (Standard Muffler) 80Kg

under request

Reviews

Quick Find

Shopping Cart

1 x	MZ-10, 5 Channel HoTT
1 x	MZ-12, 6 Channel HoTT
1 x	MZ-18, 9 Channel HoTT
2 x	Servo NARO Max Std
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
2 x	Small Crow DLE-170M
2 x	Motor DLE 170 M- Paramotors
2 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x
1 x	Cinta Goldfix 1m
1 x	SE Ring 480 mm (2 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Ferrita con funda
1 x	SE Ring 360 mm (2 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
2 x	Xplorer2 anemometro
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Xplorer1 anemometro
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Xplorer4 anemometro
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Long pinned hinge (6 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Hot Glue Stick GREEN
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Hovercraft sailcloth
1 x	ALPHA 1000mm BL ARTR
1 x	Fishing boat Jule Fischkutter
1 x	261 mm M4/M4 6.0x4.0 mm shaft ship
1 x	10 mm dogdrive props
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Motor DLE 200cc Premium Muffler
1 x	Motor DLE 430 cc - Paramotors
1 x	25 mm reinforced hinge
2 x	15 mm reinforced hinge
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Long pinned hinge (12 uds)
1 x	JETImodel Addcap 820
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	Neck strap JETI DS
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2.4EX Central Box 220
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Glases Nimbus
1 x	Foam plastic plates (310x210x3 mm)
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x	Glass fabric 80 g/m² (silane, twill) 100 cm x 10m
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Ball bearing 6003 DLE
1 x	DLE-55RA Ignition unit
1 x	Ball bearing 6002 DLE
1 x	Canister combo DLE 120 cc
1 x	Carburetor DLE 170M
1 x	Ball bearing 6203 DLE
1 x	Escape DLE-60 Izda
1 x	Gasket set DLE-30
1 x	SLICK 360-B 104" (2640 mm)
1 x	400 Newtons FEMA absorber
1 x	300 Newtons FEMA absorber
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	Bidule 111 3000 mm Canopy
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	20x1000 mm Ring Strap Back To Back
1 x	Spring Clip Ø25 mm
1 x	Motor Mount for TITAN ZG45 and ZG62, length 36 mm
1 x
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Propeller APC 16x8 Glow/Gas
1 x	3-blades 16x10 carbon prop Super Silence
1 x	PPM Encoder Module
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	PIX Hawk with accesories
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	DLE 111 pipe plug
1 x	Cylynder DLE 20-RA
1 x	DLE 55 RA pipe plug
1 x	Canister combo DLE 55 cc
1 x	DLE 111 Carb gasket (V1)
1 x	Canister combo DLE 120 cc
1 x	Carburetor DLE 170
1 x	DLE 85 / DLE111 / DLE120 Prop Washer
1 x	CILINDER FOR DLE 55RA
1 x
1 x	Carburetor DLE 20
1 x	Cilinder DLE 30 - DLE 60
1 x	DLE 55-RA Muffler
1 x	Gasket set DLE-55RA
1 x	DLE 85/111/120 Crankshaft keyway
1 x	DLE 111 Old Crankshaft keyway
1 x	Gasket set DLE-20
1 x	Big Crow DLE-170M
1 x	Canister combo DLE 111 cc
1 x	Gasket set DLE-120
1 x	CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x	Gasket set DLE-55
1 x	Carburetor DLE 30
1 x	DLE 85 Ignition unit
1 x	DLE 55 Muffler
1 x	12 mm dogdrive props
1 x	Propeller RABOESCH M4 30 mm (3 Blades) (Left hydropropeller)
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	DPSI Micro - RCS
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	Propeller RABOESCH M5 65 mm (4 Blades) (Right hydropropeller)
1 x	DPSI Micro - RCS RV
1 x	Propeller RABOESCH M4 65 mm (4 Blades) (Right hydropropeller)
1 x	wing/fuselage connector for 3 pines AWG 20-24
1 x	LiIon Battery 3000 mAh 3.3v 15A (2 pcs)
1 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Propeller RABOESCH M4 50 mm (3 Blades pr) (Left hydropropeller)
1 x	Cylinder for ZG20

23,291.81EUR