1 x | Allen wheel collar M4x4 |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Allen wheel collar M3x3 |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
3 x | Canopy Latch |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | 45 mm rods + T patellas set for direction control |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | 45 mm rods set for direction control |
2 x | Cockpit aluminium closing |
3 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Cable tie mounts 4.3 (4 uds) |
2 x | 140 mm rods set for direction control |
1 x | 80 mm rods set for direction control |
3 x | 100 mm rods set for direction control |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | 41x5,5 mm wires output (2 pcs) |
3 x | Cable grommet Ø 5 mm (4 uds) |
2 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Ferrita 27x14x7 mm |
1 x | Ferrita 14x8x5.5 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | ABS tube 8.0x6.0x1000 mm |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | 1/4 Pilot "Mike" |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
3 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Piloto jet 130 mm |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
2 x | 1/12 Pilot "Tom" |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | 1/6 Pilot "Cindy" |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Pushrod octagone 3/2 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Motor A2212/13T |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Smoke set "S" |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Snap short M2 (10 uds) |
2 x | 4 LiPo XH>EH adapter |
1 x | Support Pitot JETI |
1 x | Support pumb/filter Xicoy X45 |
1 x | Angle support XT60 conector |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | 22m Fitting barb |
1 x | |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | 20 mm carbon horn |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | 1/10 Pilot "Jack" |
1 x | 1/4 Pilot "Heidi" |
1 x | 1000 cc gasoline fuel tank complet |
1 x | 1/12 Pilot "Fighter" |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | 120x60 mm SLH KOVO wheel |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | Cockpit latch closing I=10 mm |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Cockpit metalic closing |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | Support conector MPX (6 pcs) |
1 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | PPM Encoder Module |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Support FUEL DOT V3 |
1 x | Support ECU Xicoy X-45 |
1 x | 1,5x50 mm allen screwdriver |
2 x | 20 g tin paste |
1 x | Servo DITEX EL0510M |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | 2 LiPo XH>EH adapter |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 30 cm BEC cable (female) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Ferrita con funda |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Bags wings/rudder ASPIRE |
1 x | Cockpit aluminium closing 5.4g |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Loctite HYSOL 9462 |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Propeller 10x4,7 SlowFlyer |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Servo DITEX TD2612S |
1 x | 1/6 Pilot "Garry" |
1 x | LA500 Autogyro |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
1 x | TYGON tubo 1 m Diam. 3.4 x 2.0 mm |
1 x | "Taxi Tank" Fuel Tank |
1 x | Spinner INOVA 102 mm Black |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | 18m Fitting barb |
1 x | Landing gear Rocket 400 |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 5,0 mm |
1 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Tren de cola carbono 50-70cc |
1 x | 1/6 Pilot "Buddy" |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | 20x200 mm battery rings |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | Spinner INOVA 45 mm White |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Balsa panel 10x100x1000 mm |
1 x | Bags de Luxe ASPIRE |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | F4E Phantom Scale 1:7 |
1 x | Xplorer2 anemometro |
1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
1 x | 1/7 Pilot "Japanese" |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | OPTIC 8 opto Rx-servo insulation |
1 x | DUPLEX 2.4 EX MBar |
1 x | Caps multicolor Switch JETI |
1 x | Neck strap JETI DC |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Teacher / Student Cable |
1 x | Propeller 9x7 SlowFlyer |
1 x | Propeller 3x3 |
1 x | PIX Hawk with accesories |
|
10,607.09EUR |