Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Canopy Astra
1 x	Electric spoiler 300 mm (2 pcs)
1 x	Sliding window 1:2,4 / 1.2,6 Scale
1 x	Canopy Sweet / Siesta
1 x	Electric spoiler 440 mm (2 pcs)
1 x	120x60 mm SLH KOVO wheel
1 x	DINO Glider ARC
1 x	Grafas ARF 3.0 m (Top Model)
1 x	1/6 Pilot "Buddy"
1 x	"S" set for planes
1 x	1/4 Pilot "Heidi"
1 x	Electric Fuel Pump 12V
1 x	Electric Fuel Pump 12v
1 x	Angle measurer
1 x	Avia (Top Model)
1 x	Angle of incidence meter
1 x	90x60 mm standart servo cover
2 x
1 x	30 mm Alu spinner 3 mm pleg. propeller
1 x	57 mm micro-mini servo cover
1 x	18 mm wing servo holder
1 x	ALBATROS 3.0 m (orange/white)
2 x	ACTIVE ARF Electric 1.995 mm
2 x	BULLIT Wing 1095 mm
1 x	Bidule 55 V3 2460 mm
1 x	BULLIT Wing 840 mm
2 x	Albatros red/white (Top Model)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Electric starter BEE (old)
1 x	PowerFuel RX V2 Fuel Pump
1 x	Variable Flow Smoke Pump System
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Surface Indicator Gauge Small
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Support conector MPX (6 pcs)
1 x	Extension silicon 35 cm male (Futaba)
1 x	One touch canopy lock
1 x	BALSA trip 10x10x1000 mm
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	Long pinned hinge (12 uds)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Towing hook
1 x	ABS tube 5.0x4.0x156 mm
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Landing gear axle Ø 4 mm (2 uds)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Ply-Span 450x600/13g Orange
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Crimping tool
1 x	20 mm tail wheel for 0,5-1 Kg models
1 x	Oratex White 2m
1 x	DYNAMOMETER S-1580
2 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Screwdriver for Hexagon 1,27mm
1 x	Extension silicon 30 cm male (Futaba)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Round Rod 3,0x1000 mm
1 x	Starter EM Gear Power 250
1 x	Steering arm 12 mm Ø 4 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	SUS wire 3m (nylon coated)
1 x	Support XT60 conector (2 pcs)
1 x	MYLAR film A350 (1000x500 mm)
1 x	200 mm extensión servo HITEC/JR
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Strip 2,0x2,0x330 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
1 x	"S" set for boats
2 x	Horn mando small (2 pcs)
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	1/10 Pilot "Jimmy"
1 x	Plastic caps for AIR BURTS (30 pcs)
2 x	Horn 5/20 with M2 Bearing
1 x	Extra long horn 60x30
1 x	Ventus 2cx 4.5 m Cabling wings
1 x	Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Servo HITEC D-955 TW Titanium
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Charger ISDT 608AC 200W
1 x	Servo Mount S (red)
1 x	Red aluminium servo arm V1-Futaba 1,25" inch M3
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	Ka 8 B (Top Model)
1 x	Pilot JAN 1/4 Saiplanes
1 x	Propeller electric carbon 10x8
1 x	PVC grid straight 290x185x0.32 mm
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Straightened threaded rod M3 - 1m
1 x	Blind nut M6 (4 pcs)
1 x	Smokelance
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Servo HITEC HS-56 BB
1 x	Servo HITEC HS-5085 MG Digi
1 x	Servo HITEC D131 MW nano
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Servo HITEC HS-55
1 x	Smoke Oil Blue 5 l
2 x	Bidule 55 2460 mm Cabina
1 x	Cable set Premium™ MAXI "one4two"
1 x	MPX-Dean "T" Adapter
1 x	Extension MPX-MPX 20 cm
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Motor XPower F2915/12 XLight
1 x	Servo TOPMODEL STANDARD S3217
1 x	58 mm micro servo cover
1 x	NIKE-2 EVO ARF
1 x	Pegasus 2050 mm F4J (Top Model)
1 x	Bidule 111 3000 mm Canopy
1 x	BRASS CONTROL HORN M3x16 mm 2pcs
1 x	Avia spare blue cockpit (Top Model)
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	90x75 mm standart servo cover
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	50x45 mm micro-mini servo cover
1 x	Crimping tool
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	Propeller hub spacer 8/5.5
1 x	Propeller POWER-PROP 11x8
1 x	resin-hardener package L-385 with hardener H-385
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
1 x	Tape GFK 50 mm
1 x	Tape GFK 25 mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	SE Ring 400 mm (2 pcs)
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	WingFix ULTRA Black Edition
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Glass fabric 425 g/m² aero,10x1m
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Brass control horn M3 short for wire (2 pcs)
1 x	Parachute PV6 for F3J
1 x	20 mm carbon horn
1 x	Cable with accesories
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Micro control horn (2 pcs)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Horn 5/10 with M2 Bearing
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Rudder forward 70x28 "type Kato"
1 x	Horn with ball 55x40
1 x	Micro control horn T2 Ø 1
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x	Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6
1 x	Set Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Adjustable brass horn threaded M3
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Horn DUBRO 1/2A
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	6 mm blue aluminium threaded horn with patella
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horns indoor
1 x	6 mm M3 variable inclined horn
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Small aluminium horn blue (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Horn 6/27 with M3 Bearing
1 x	RH long aluminium horn (2pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn for flap control (1 pcs)
1 x	Horn 6/20 with M3 Bearing
1 x	SlowFlyer control horn (3 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Brass control horn M2 large for wire (2pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 6/35 with M3 Bearing
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Horn 5/15 with M2 Bearing

14,845.94EUR