Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return temporarily out of stock	Epoxy L 40 min. 10 kg (Resin) temporarily out of stock	Silicone red 4,0 qmm wire (25 m) temporarily out of stock
XT-90 connector (pair) temporarily out of stock	T- Fittings blue color (2pcs) temporarily out of stock	White gelcoat 1 Kg temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	Ballast 700gr OPALE
1 x	Windsock Ozone L -1200 mm
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
2 x	Aluminium wide washer M3 gold (4 pcs)
1 x	M3 black washers (4 pcs)
2 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
3 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Parachute PV6 for F3J
2 x	Wing OXY 5,0 m2
1 x	Spring lock washer 2.6 mm (20 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
2 x	Trike XL motor set (motor+esc+prop)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Set cintas unión paracaídas 145 cm
2 x	Windsock Ozone L - 700 mm
2 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Parachute P4
2 x	Opale Rucksack
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
3 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
2 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	M3-M4 rubber washer (8 pcs)
2 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aramid 50 daN 50 m
1 x	Flat washer 2.7 mm (20 uds)pcs)
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
4 x	Lock washer 2.2 mm (20 pcs)
2 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Para-RC Mix
1 x	Quicklock washer 3 mm (10 pcs)
2 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
3 x	Vacuum bag, 1200 mm x 50 m
2 x	Flat washer 4.3 mm (20 pcs)
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
2 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 2.0x10.0x1000 mm
2 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
2 x	Beech dowels 10 mm x 1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 100 cm (Futaba)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x	CM-3
1 x	Screwdriver for Torx® TX8
1 x	Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	Flat washer 2.2 mm (20 pcs)
1 x	LED blink wire flashing (green - 2pcs)
2 x	Nut for mounting M2 (4 pcs)
2 x	Blind nut M5 (4 pcs)
1 x	3 mm Long Prop Adapter M5
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Blind nut M4 (10 pcs)
1 x	Screw M4x30 (10 pcs)
2 x	Screws 2,2 x 6,5 mm (20 pcs)
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Blind nut M3 (4 pcs)
1 x	LUCAS pilot ARTF
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Aluminium sheet 500x250x0,5mm
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Screw KB 1.4x6 mm (10 pcs)
1 x	Servo M2x5/16 screw (4 pcs)
2 x	Pan Head Screw M2x8 PH
1 x	Screw M2x6 (10 pcs)
1 x	Motor OS 3820-1200 electric
1 x	Tapping Screw M2.2x13 (10 pcs)
2 x	Nut for mounting M3 (10 pcs)
1 x	5 mm Prop Adapter M6
1 x	3 mm Short Prop Adapter M5
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Socket Head Screw M2x12
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 20m
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
2 x	Nylon Screw M6x40
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Paramotor Trike XL
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 silver pcs)
1 x	Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm)
1 x	Styrene plate 320x120x1.0 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Parachute BACKUP X100
1 x	Hexagonal Nut M4 (10 pcs)
1 x	Release film 100 cm x 50 m
1 x	Screw M2.5x8 (10 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x	Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Styrene plate 320x120x0.5 mm
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Buy Perforated film 100 cm / 20 m
1 x	Blind nut M5 (10 pcs)
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Carbon plate 350x150x2.5 mm
1 x	Pine wood slat 3.0x5.0x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Release wax 250ml
1 x	White smoke bombs AX-18 (5 pcs)
1 x	Spray adhesive AEROFIX 2
1 x	Partall paste 650 g
1 x	AX-60 starters (5 pcs)
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	500 ml sealer (DOPE)
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Yellow smoke canister 100 g
1 x	"S" set for planes
1 x	20 g tin paste
1 x	Yellow smoke canister 65 g
1 x	"S" set for boats
2 x	CNC FPV Display screen&Transmitter Holder Vertical
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Complete kit CAT 966G II WEDICO-construction-models
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	FunCub NG azul RR
1 x	3-blades 16x10 carbon prop Super Silence
1 x	Propeller POWER-PROP 12x9
1 x	Propeller POWER-PROP 10x6
1 x	Propeller electric carbon 8.5x6
1 x	PROPELLER ELECTRIC glass 9,5x6
1 x	Propeller POWER-PROP 10x7 Izda
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Servo arm with 5 mm hole to FEMA 9810A
1 x	Pan Head Screw M1,6x8 (10 pcs)
3 x	Lock washer 3.2 mm (20 pcs)
1 x	Lock nut M5 (10 pcs)
1 x	Pan head screw M2x16 PH
1 x	Pan Head Screw M2x6 PH
1 x	Receptor CORE PBR-26XS 26ch
1 x	Emisora FUTABA T18 SZ + R7208SB
1 x	38 mm Alu spinner 5 mm pleg. propeller
1 x	Aluminum Fold Prop Spinner 50 mm / 6mm
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Paramotor BackPack XXS (without accessories)
1 x	Para-RC Trike "RC-Bullix"
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Módulo Bluetooth
1 x	BALSA triangular 15x15x1000 mm
1 x	Wingstabi 9 DR M-Link Receiver
1 x	PARKMASTER PRO Kit + (RR)
1 x	Beech dowels 2.0 x 1000 mm
1 x	21x14 Falcon electric carbon prop (64 g)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	30x14 prop Super Silence
1 x	Xoar Electric Beechwood Prop 20x10
1 x	Xoar Electric Beechwood Prop 15x8
1 x	20cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	3-blades 24x12 carbon prop Super Silence
1 x	Propeller 12x6 Falcon electric
1 x	10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	20,5x14,5 Falcon electric V2 (40 g)
1 x	Propeller POWER-PROP 11x9
1 x	Legs + electric brakes for Viper Jet 90
1 x	Fail Safe air retract
1 x	Tap FESTO 4-4 mm
1 x	Lock nut M6 (10 pcs)
1 x	Lock washer 4.3 mm (20 pcs)
1 x	Socket Screw M3x9 mm
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Lock nut M2 (20 pcs)
1 x	Screw M2.5x10 (10 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)

28,315.83EUR