2 x | CC 03 |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Dean "T" - Futaba Adapter |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 30 cm BEC cable (male) |
2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Cabling for Fox MDM1 wings |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | CM-3 |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | CC 02 |
3 x | 2 LiPo XH>EH adapter |
1 x | Connector Sub-D 2+5 Male |
1 x | 5 LiPo XH>EH adapter |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Connector Sub-D 2+5 Female |
1 x | CC 01 |
2 x | 30 cm BEC cable (female) |
1 x | CC 05 |
2 x | 4 LiPo XH>EH adapter |
1 x | Jeti Black cap |
1 x | DYNAMOMETER S-1580 |
1 x | Towing hook |
1 x | LOWER TOW HOOK |
2 x | Towing hook |
1 x | Towing hook <3m |
1 x | Optical RPM Sensor |
1 x | Fixed launching hook |
1 x | Tow hook for tug |
1 x | Ring 320 mm length (5 pcs) |
1 x | Marker ties (20 pcs) |
2 x | |
1 x | SE Ring 250 mm (2 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
2 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Tape GFK 25 mm |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | 20x200 mm battery rings |
1 x | Tape GFK 50 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Foil for sticking flaps and ailerons |
1 x | SE Ring 450 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | SE Ring 480 mm (2 pcs) |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Male connector for 6 pines AWG |
1 x | Adapter lead MPX/EC3 |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Round Rod 4,0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Soporte servo KST X08/H and Plus |
1 x | Servo KST X08 Plus 9g HV servo |
2 x | 3 LiPo XH>EH adapter |
1 x | Servo MKS 6100 DS |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | 10-15mm Servo Arm HITEC |
1 x | Servo MKS HBL550 |
3 x | Servo SAVOX SV-0236 MG HV |
1 x | Gear for D 54 |
2 x | Servo HITEC HS-45 HB |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Adjustable launching hook |
1 x | SERVO HOLDER |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Servo SAVOX SV-1261 MG |
2 x | 50 mm servo arm with bearing (2 pcs) |
2 x | Servo SAVOX SA-1258 TG |
1 x | SAVOX SH 1290 MG servo digi |
2 x | Servo SAVOX SV-1270 TG |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Servo HITEC HS-45 HB, servo box |
2 x | Servo SAVOX SH 0257 MG |
1 x | Servo HITEC D950 TW |
1 x | Circlick securite |
1 x | Servo mounting frame SV-1260MG |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
2 x | Savox Brushless Servo SB-2271SG |
1 x | Savox Brushless Servo SC-1267 SG |
2 x | SAVOX SH 1250 MG servo digi |
1 x | Servo SAVOX SB-2290 SG |
1 x | Savox Brushless Servo SC-1251 MG |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | Servo SAVOX SV-1273 TG |
2 x | Servoarm Aluminium SH-82 |
2 x | ALU servo arm 90º 3 mm shaft |
1 x | Servo HITEC HS-325 BB |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Gear set HITEC HS-55 |
1 x | ALU servo arm 3 mm shaft |
1 x | Gear set HITEC D645 MW |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Servo HITEC D954 TW |
1 x | Gear set HITEC HS-56 HB |
1 x | Servo HITEC D145 SW |
1 x | Servo HITEC D131 MW nano |
1 x | Gear set HITEC HS-85 |
1 x | Gear set HITEC HS-65 HB |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Conector XT-30 (macho) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Power Pack SE Series JETCENTRAL |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Extension 6 lipos XH > EH |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Red 3m5 mm connector holder |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | Conector Servo female 4 pines |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | Servos security connector (2 pcs) |
1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
1 x | JETCENTRAL ECU LIFE BATTERY 3800 MAH |
1 x | Futaba 52 mm servo arm |
1 x | FUTABA 20 mm servo arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
1 x | SE Ring 300 mm (2 pcs) |
1 x | 8 mm Adapter for AXI53xx |
1 x | Frontal Adapter for AXI53xx |
1 x | Servo AN-20 MGBBA |
1 x | Oracover Black 10 m |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | HDT Jet Central |
1 x | Futaba 20 mm servo arm |
1 x | Futaba 38 mm servo arm |
1 x | Futaba 17 mm servo arm with ball link HITEC |
1 x | 17 mm servo arm with ball link DES Graupner |
1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | 5 mm M2 variable horn |
1 x | Gates hinge |
1 x | Indoor landing gear set |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Futaba 30 mm servo arm with M3 ball link |
1 x | Hitec 25 mm servo arm with ball link |
1 x | White aluminium 230 mm landing gear |
1 x | Futaba 38 mm servo arm with ball link |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Futaba 2x20 mm servo double arm |
1 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Futaba 46 mm servo arm with ball link |
1 x | Bearing block for noseleg landing gear |
1 x | Futaba 30 mm servo rounded arm |
1 x | Adapter rotula M3 |
1 x | Futaba 25 mm servo arm with ball link |
1 x | Hitec 20 mm servo arm |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Ball link M2 (10 pcs) |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Ball link M3 (10 pcs) |
1 x | HITEC 20 mm servo arm with ball link |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | 120 mm leg for retract undercarriage with rotation sistem (1 pcs |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | Legs + electric brakes for Viper Jet 90 |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Propeller hub spacer 8/5.5 |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Radial Mount Set for AXI2814 and AXI2820 V2 |
1 x | AXI Cooler 41xx |
1 x | Prop Holder AXI 41xx V2 |
2 x | 15x7 tree blades propeller |
2 x | Propeller POWER-PROP 14x10 |
2 x | Propeller POWER-PROP 13x9 Izda |
2 x | XPower XC4226/12 LS |
1 x | Propeller electric carbon 6.5x4 |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Planetary gearbox(3,33:1) |
1 x | Excentric gearbox for 2,0mm axis (5,0:1) |
1 x | PH5 adapter for 5mm M8 axi for AXI2820 y 2826 |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Universal Prop Saver |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | Propeller POWER-PROP 11x9 |
1 x | Propeller electric carbon 10.5x8 |
1 x | 8x6 tree blades propeller |
1 x | Propeller electric carbon 6x5 |
1 x | Propeller electric carbon 7x7 |
1 x | MIG AC 400 /14 |
1 x | Propeller electric carbon 8.5x7 |
1 x | Propeller POWER-PROP 13x10 |
1 x | XPower XC3522/5 LS |
1 x | Motor XPOWER F2919/10 F5J Light |
1 x | Propeller electric carbon 9.5x5 |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Planetary gearbox(3,8:1) |
1 x | Planetary gearbox(3,33:1) |
1 x | STD gearbox for Speed 480 3,2mm axis (2,33:1) |
1 x | Gearbox KPG25 5,2:1 |
1 x | MEGA GEAR 16 3,1:1 Gearbox |
1 x | Adapter SPEED 500/600 |
1 x | Propeller POWER-PROP 14x12 |
1 x | Propeller POWER-PROP 12x9 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller POWER-PROP 12x8 |
1 x | 16x10 tree blades propeller Master Airscrew |
1 x | Propeller electric carbon 10.5x7 |
1 x | Propeller POWER-PROP 10x7 |
1 x | Propeller POWER-PROP 13x8 |
1 x | Propeller POWER-PROP 12x6 |
1 x | 15x7 tree blades propeller LEFT |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller electric carbon 9.5x7 |
1 x | Dumper propeller 6/8 mm |
1 x | Motor XPower F2915/12 XLight |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller electric carbon 10x8 |
1 x | Propeller electric carbon 10x7 |
1 x | Propeller POWER-PROP 13x9 |
1 x | 6x4 tree blades propeller |
1 x | STD excentric gearbox for 2,0mm axis (4,5:1) |
1 x | Excentric gearbox for 3,2mm axis (2,33:1) |
1 x | STD excentric gearbox for 2,3mm axis (3,0:1) |
1 x | STD excentric gearbox for 2,3mm axis (4,1:1) |
1 x | Planetary gearbox(3,33:1) |
1 x | Excentric gearbox for 2,3mm axis (3,5:1) |
1 x | Excentric gearbox for 2,3mm axis (3,0:1) |
1 x | Planetary gearbox(3,33:1) |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Servo SAVOX SV-1260 MG |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Servo SAVOX SA-128S SG |
1 x | Adapter FUN 400/480 |
1 x | Reductora IPS 150 DX2BB-BXCS 7:1 |
1 x | Gearbox KPG27 5,2:1 |
1 x | Grease Dryfluid HELI |
|
8,324.29EUR |