85.00EUR

Motor Mega AC 16/15/05 CE F5J
[MEGA16155CEF5J]


Brushless motor MEGA ACn 16/15/x. Diameter 28mm, length 36,4mm, weight 76g.
Specifications
-Hardened stell shaft, diameter 5.0 mm.
-Two precise ball bearings
-Dynamically balanced
-Neodym magnet rotor
-Handmade stator, lightweight rotor allows high revolution.
-Kevlar bandage rotor
-Motor mount has two M3 threads for two M3 screws
-Efficiency up to 88%
-COMBAT version is designed for higer mechanical requirements, shaft diameter 5 mm.
-Recommended gearbox: MEGA GEAR 16
-Size and weight of these motors are the same as brushed motors of product line MIG 400. They have much better efficiency, power, max. revolutions and long lifetime. For example with motor MEGA ACn 16/15/8 and 8 cell aerobatic model you more than double the time of flight compared to MIG 400 motor.
-Motors are also suitable for 50 - 70 mm diameter ducted fan.
-At special request we can cupply also motor Mega ACn 16/15/4 with non-standart shaft with diameter 2,3mm. We can recommend this power drive for helicopter models MicroStar 400 (Graupner) Zoom 400 (Protech) with weight 650 - 700 g, 3 cells Li-Pol 3S1P 1500 – 1800 mAh. 11,1V , current supply approx. 10A, recommended controller 25A. (more in "RC Revue 06/2005" magazine (pages.50-51) - in Czech).


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Altimeter Altis V4
Altimeter Altis V4

temporarily out of stock
temporarily out of stock

Propeller Pleg CAM Carbon 10x6
Propeller Pleg CAM Carbon 10x6

temporarily out of stock
temporarily out of stock

Spinner propeller pleg. 38 mm / 5 mm
Spinner propeller pleg. 38 mm / 5 mm

temporarily out of stock
temporarily out of stock

Ø 28 mm fiberglass motor-holder for electric motors
Ø 28 mm fiberglass motor-holder for electric motors

temporarily out of stock
temporarily out of stock

Ø 40 mm fiberglass motor-holder for electric motors
Ø 40 mm fiberglass motor-holder for electric motors

temporarily out of stock
temporarily out of stock

Spinner propeller pleg. 30 mm / 5,0 mm
Spinner propeller pleg. 30 mm / 5,0 mm

temporarily out of stock
temporarily out of stock

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x SE Ring 400 mm (2 pcs)
2 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x 14x60 mm Mini rings Tie Wraps (4 pcs)
2 x Z type of cable coupler Ø 2 (2 uds)
4 x Tape GFK 38 mm
2 x 
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Threaded coupler M2 (10 uds)
3 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x SE Ring 300 mm (2 pcs)
2 x Ball Link M2 with Ball and Hardware, 10 pcs
2 x 20x1000 mm Ring Strap Back To Back
2 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x SE Ring HACKER 300 mm (2 pcs)
2 x Ball link V1 Ø7 M4/3 (6 uds)
2 x SE Ring 450 mm (2 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x SE Ring 350 mm (2 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Foil for sticking flaps and ailerons
2 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Aluminium red ball links M3 V1 (10 pcs)
2 x SE Ring 200 mm (2 pcs)
2 x Tape GFK 25 mm
2 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
2 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link duraluminium M3 V1 (10 pcs)
3 x Tape GFK 50 mm
2 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Couple M4 for wire (10 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
2 x Angled clevis with threaded rod M3
2 x SE Ring 250 mm (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
3 x Ring 320 mm length (5 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
3 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
2 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x Cinta Goldfix 1m
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 800TVL CMOS camera for FPV
2 x Glases Stratus
2 x Glases Nimbus "Black"
2 x Glases Aspen
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
2 x Glases Ace
1 x Windsock Ozone L -1200 mm
1 x Wing OXY 5,0 m2
1 x Set cintas unión paracaídas 145 cm
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Para-RC Trike "RC-Bullix"
1 x Paramotor BackPack XXS (without accessories)
1 x Paramotor Trike XL
1 x Para-RC Mix
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Rescue 1,8m2 / BackPack
1 x 1/4 Pilot "Mike"
1 x Adjustable launching hook
1 x Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Pulley brass 14/2 (2 pcs)
1 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
2 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x SE Ring 330 mm (4 pcs)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 240 mm (2 pcs)
1 x Blades 330mm
1 x Baseplate servo
2 x Marker ties (20 pcs)
1 x Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
2 x SE Ring 480 mm (2 pcs)
2 x SE Ring 360 mm (2 pcs)
1 x Glases Flitemaster
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Rubber profile 10-2 mm 2M
1 x ABS rectangular profile 12x6.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS half cane 2.0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x 5 line servos wire black (1 m)
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x ABS I Strip 10x5x1000 mm
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Profile ABS half cane 8.0x1000 mm
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x 20x200 mm battery rings
1 x Rubber profile 8-2 mm 2M
1 x Profile ABS half cane 4x2.5x1000 mm
1 x Round Rod 2,0x1000 mm
1 x ARS 300 91" ARF 2311mm ORANGE
1 x ULTRA STICK 30 cc ARF
1 x Sebart 2.2 m WHITE/BLUE (SebART)
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x ABS Strip 1.0x4.0x1000 mm
1 x SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x Round Rod 1,5x1000 mm
1 x EDGE 540-A 91" (2310 mm)
1 x ABS Strip 1.5x4.0x1000 mm
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Cable coupler M2 (10 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Ball link Aluminio M3 (2 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Cable coupler M2 (10 uds)
1 x Cable coupler M3 (10 uds)
1 x Cable coupler M2x66 (2 uds)
1 x 4 mm M3 red control terminal (4 pcs)
1 x Cable coupler M3 (10 uds)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Suncover 100cc Red
1 x Spikes Band (5 m)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Cierva C30 spanish decoration Stickers
1 x Head core
1 x LA500 cyclic central part
1 x LA500 pre-rotation gear
1 x 20x13 Falcon electric carbon prop (64g)
1 x Propeller POWER-PROP 14x9
1 x Head runner
1 x LA500 pilot-seat set
1 x Cierva C30 Elevator
1 x Head spacer
1 x Autogyro Cierva C30 Spain
1 x PropCover 16-20" (2 pcs)
1 x Propeller MEJZLIK 21x10 Electric light (36 g)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Servo HITEC D85 MG
11,355.96EUR
Manufacturers
Manufacturer Info
Mega Motor
Mega Motor Homepage
Other products
Languages
Español English
Currencies