115.00EUR

GPS Sensor + Logger OPTronics
[OPTGPS]


GPS Sensor + Logger OPTronics
FEATURES

Small dimensions, high measurement accuracy.
Large industrial memory for data logging.
Latest generation GPS chipset supporting multiple satellite systems.
3-axis magnetometer/compass for external navigation purpose.
Backup supercapacitor for fast position fix after powering off.
Voltage measurement and logging.
Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2.
Automatic timezone detection.
Configuration through the transmitter.
Firmware updates.
Dimensions 28x30x9mm
Weight 14g
Memory size 256mb
Supported positionning systems GPS , Galileo, Glonass
Flash endurance 100 000 cycles
Sampling 10Hz, 5Hz, 2Hz, 1Hz
Operating current 50mA
Voltage 3.5-8.4v
Telemetry Duplex EX, Multiplex MSB,
Graupner Hott, Futaba S.Bus2
Status LED Oui
GNSS Receiver sensitivity -167dbm
GNSS Max Acceleration 4G


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x SUS wire 3m (nylon coated)
1 x Steering arm 16 mm Ø 3 mm
1 x Stainless steel cable Ø 0.5 mm (2 m)
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Stainless steel cable Ø 0.62 mm (10 m)
2 x Locking cable tie 2.5x100 (uds)
1 x Crimping sleeves for cable 1.3 mm (10 pcs)
2 x Canopy Latch
1 x Screw-lock connector M2 (2 uds)
2 x Stainless steel cable Ø 0.5 mm (10 m)
2 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Locking cable tie 4.6x203 (uds)
1 x Remote electric ignition system
1 x Parachutist
1 x Yellow smoke canister 140 g
1 x White smoke canister 100 g
1 x Premium servo extension 75cm
1 x Extension 90 cm (Futaba)
1 x Cabel "Y" 30 cm (Futaba)
1 x Green smoke canister 140 g
1 x Premium servo extension 50cm
1 x Yellow smoke canister 65 g
1 x Extension silicon 10 cm (Futaba)
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x AX-60 starters (5 pcs)
1 x Circlick securite
1 x Extension silicon 30 cm female (Graupner)
1 x ORACOVER Fluor red (2 m)
1 x ORACOVER transparent Yellow (10 m)
1 x Oracover Azul 2 m
2 x Oracover light Grey 2m
2 x Oracover CHROME 2m
2 x Oratex Yellow Cub 10 m
1 x MYLAR film A350 (1000x500 mm)
2 x Oracover Yellow CADMIO 2 m
1 x Oratex Natural White 20m
1 x Oratex Red Fokker 10 m
1 x Oracover CARBON Metalic 1 m
1 x 1/7 Pilot "Japanese"
2 x Pilot "Dick" Legends Series (Slimline)
1 x Piloto RC Civil 1/5- 1/6 Scale 12"
1 x 1/12 Pilot "Fighter"
1 x 1/12 Pilot "Langley"
1 x Civilian pilot "Gramps" size 9cm (Slimline)
2 x 1/4 Pilot "Mike"
1 x Piloto Jet "Red" 1/6 Scale
1 x Pilot "Goose" (Slimline)
1 x 1/6 Pilot "Buddy"
2 x Pilot "Duke" Legends Series (Slimline)
2 x Piloto JET 1:3,5
2 x 1/6 Pilot "Garry"
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x Optical RPM Sensor
2 x Civilian pilot "Joe" size 9cm (Slimline)
1 x 1/6 Pilot "Cindy"
2 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Pilot "Anthony" (Slimline)
1 x Extractor piñones 2.3/3.2 mm
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x Complet landing gear
1 x Steering lever
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x 28x5 mm wires output (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Allen wheel collar M3x3
1 x Screw-lock connector Ø 2 mm (2 uds)
1 x Allen wheel collar M4x6
1 x Cable tie mounts 4.3 (4 uds)
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Steering arm 16 mm Ø 3 mm (2 uds)
1 x Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x Cockpit plastic closing
1 x Tip wing protector 30x10 (2 pcs)
1 x Wheel collar 5 mm Ø (4 uds)
1 x 1/10 Pilot "Jimmy"
1 x Pushrod octagone 4/3 with coupler M3
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Split pin 1.6x16 mm (10 uds)
2 x Pilot JAN 1/4 Saiplanes
1 x 100 mm rods + T patellas set for direction control
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x 1/12 Pilot "Tom"
1 x Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Snap short M2 (10 uds)
1 x Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x 250 mm / 16 mm Airbrakes
1 x Crankcase Gasket set for ZG 74 / ZG 80
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x ZENOAH ZG 26SLH Helicopter Engine
1 x Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x Wing bolts M3 Steel screw blue (2 pcs)
1 x Support pump Xicoy X45
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Extension PVC 150 cm (Graupner)
1 x Extension silicon 75 cm (Graupner)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Extension silicon 75 cm (Futaba)
1 x 200 mm extensión servo HITEC/JR
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Premium servo extension 100cm
1 x 6,4x1000 mm 2:1 blue termoretract tube
2 x 1,6x1000 mm 2:1 black termoretract tube
1 x Oracover Yellow CUB 10 m
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x PVC termo-retract battery 45 mm transparent orange (1 m)
1 x Oracover Green10 m
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x 120x60 mm SLH KOVO wheel
1 x Monokote ROJO misil (1.8x0.65m)
1 x Oracover White 2 m
1 x Flybar support metal LAMA
1 x PVC termo-retract battery 45 mm black transparent (1 m)
2 x Ply-Span 450x600/13g Yellow
1 x Ply-Span 450x600/13g Blue
1 x PVC termo-retract battery 95 mm blue transparent (1 m)
1 x Oratex White 2m
1 x PVC transparent battery termo-retract 195 mm (1 m)
2 x 12.7 mm 2:1 black termoretract tube
1 x Oratex Antik 2m
1 x Oracover White 10 m
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x 1,2x1000 mm 2:1 red termoretract tube
2 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x Oracover Black 10 m
1 x Oratex Natural White 2m
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 2,4x1000 mm 2:1 red termoretract tube
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Monokote PLATINO metalizado (1.8x0.65m)
2 x 12,7x1000 mm 2:1 green termoretract tube
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x Piloto Jet "Green" 1/6 Scale
1 x PROFICOVER 5m
1 x Ply-Span 450x600/13g Black
1 x Ply-Span 450x600/13g Red
1 x Oracover GREY Seafire Sea 2m
1 x Oracover Azul Cielo 2 m
1 x VBar Control Touch, midnight black
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Motor DLE 35 RA
1 x Valvoline SynPower 2T, 1 Litre
1 x Diaphragm Set Walbro 116/152cc
1 x Cilinder joint for G230RC/G260RC
1 x Aluminium-Plate, carb>reed valve carrier, DA-85 DA-100L and DA-1
1 x Motor DLE 40 cc Twin
1 x Ignition for ZG motors
1 x Reduction gear 2.8:1 for ZG 38 inline version
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x DA-100 Bearing
1 x Silencer Ring 7-35
1 x T-Motor U7-V2.0 Kv420
1 x Piston ring for ZG 20 and G240RC
1 x Cylinder for DA-60 and DA-120
1 x Dia. 25x5 mm tefon tube for escape
1 x Crankshaft DA-120
1 x ZENOAH/ZG 20cc
1 x DA-50R motor alumine support
1 x Escape O-Ring ZIMMERMANN FG-84/90 R3
1 x Cast Aluminium Intake Bend for ZG 23/26 and Zenoah 26
1 x Motor DLE 55 cc
1 x Motor Saito FG-100 TS, 100 cc
1 x Blade Holder Full (4 blades)
11,997.65EUR
Manufacturers
Manufacturer Info
Roi-Import
Roi-Import Homepage
Other products
Languages
Español English
Currencies