3 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
3 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cockpit aluminium closing |
1 x | Screw-lock connector M2 (2 uds) |
3 x | Canopy Latch |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
3 x | Locking cable tie 2.5x100 (uds) |
4 x | Steering arm 12 mm Ø 4 mm (2 uds) |
3 x | SUS wire 3m (nylon coated) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
3 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Cockpit plastic closing |
2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
3 x | Locking cable tie 4.6x203 (uds) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Covered closure or fairings |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
3 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | LOWER TOW HOOK |
1 x | Towing hook <3m |
1 x | Fixed launching hook |
1 x | Tow hook for tug |
1 x | Adjustable launching hook |
2 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | CC 05 |
3 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Dean "T" - Futaba Adapter |
1 x | 800TVL CMOS camera for FPV |
3 x | CC 03 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | BEC 3A FOXY |
1 x | USB HLS prog. interface |
1 x | 30 cm BEC cable (male) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Circlick securite |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
2 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 30 cm BEC cable (female) |
3 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | CC 01 |
3 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | USB Mini Camera endoscope |
1 x | CM-3 |
1 x | Ventus 1:4 set of instruments |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Adapter lead MPX/EC3 |
1 x | Cabel charger transmitter GRAUPNER |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | 5 LiPo XH>EH adapter |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | 4 LiPo XH>EH adapter |
2 x | MPX-Dean "T" Adapter |
2 x | 3 LiPo XH>EH adapter |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
2 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
3 x | Profile ABS Square 1 x 1000 mm |
2 x | Profile ABS Square 4 x 1000 mm |
2 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | PPM Encoder Module |
2 x | Tube Pitot to PIXHAWK |
2 x | PIX Hawk with accesories |
2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Cap closure 33/23.5mm (2 uds) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | 18 mm reinforced hinge |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Small pinned hinge (12 uds) |
1 x | Flap hinge (6 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | 25 mm reinforced hinge |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Xplorer1 anemometro |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Paramotor Trike XL |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | 25 mm Sandpaper file |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cable Cargador FUTABA |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | EWC3 40 cm wing connector |
1 x | Hacker X-Pro USB interface V2 |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | SPARK Switch 12v |
1 x | Window mounting channel 5m |
1 x | Rubber profile 10-2 mm 2M |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
2 x | Profile ABS half cane 6.0x1000 mm |
3 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Adapter lead MPX/XT60 |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
3 x | ABS angle 6,0x6,0x1000 mm |
1 x | CC 02 |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | T-Connector 4.0 mm x 1000 mm |
2 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Propeller POWER-PROP 7x7 |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Rubber profile 6-2 mm 2M |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Allen wheel collar M4x6 |
1 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
3 x | Snap short M2 (10 uds) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Snap for floding prop for 2 mm axi |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M3x5 |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Field folding model stand SebArt |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | DUPLEX 2.4GHz GPS |
1 x | DUPLEX 2.4EX MULi 6s M |
2 x | 45 mm rods set for direction control |
2 x | Allen wheel collar M3x3 |
1 x | 28x5 mm wires output (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
3 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Pushrod greyline 4/3 with coupler M3 |
1 x | Tip wing protector 30x10 (2 pcs) |
3 x | Wheel collar 2 mm Ø (4 uds) |
2 x | Clip fixing for wing (2 pcs) |
1 x | Pushrod octagone 4/3 with coupler M3 |
2 x | Snap pin for micro clevis (10 uds) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Landing gear frontal support 25x32x16 |
1 x | Medium pin type hinge (12 uds) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
3 x | Landing gear axle Ø 5 mm (2 uds) |
3 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | Baseplate servo |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
2 x | SD HC 8 GB |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | RX cabel |
1 x | Connector CAN 15 |
1 x | Cabling for Fox MDM1 wings |
1 x | EWC6 40 cm wing connector |
1 x | Male connector for 6 pines AWG |
2 x | Profile ABS half cane 2.5x1000 mm |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | PT 20x13 EL Propeller |
1 x | ULTIMATUM 2.0 PRO "Full Carbon Red" |
1 x | Interruptor RX/Batterie |
1 x | ER-50eVo Set A [2x ER50 + RB-45] |
1 x | Female connector for 12 pines AWG |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Connector Sub-D 2+5 Female |
1 x | Male connector for 10 pines AWG |
1 x | 45 mm rods + T patellas set for direction control |
1 x | 140 mm rods + T patellas set for direction control |
1 x | SPARK Switch 7.4v |
1 x | DPSI Ampere battery backer |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Electric Landing Gear AVANTI XS (Elektron Retracts) |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | 90 mm rods + T patellas set for direction control |
1 x | FX three-position switched channel, long |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | DPS Switch JR/JR |
1 x | Micro Switch button |
1 x | 10-15mm Servo Arm HITEC |
1 x | Male connector for 16 pines AWG |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
1 x | E_brakes electronics |
1 x | 140 mm rods set for direction control |
1 x | PropCover 16-20" (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | CA Glue (medium) 20g |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Snap long M2 (10 uds) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | BULL MØ1 2.600mm RED |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Hardener Aero EPH 161 (250 g) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Junta humo metalica G30 (DLE30/DLE60) |
1 x | Pitts Muffler kit for CAP 21 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Robart Door Hinge (Pk2) |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Cockpit aluminium closing 4.7g |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | |
1 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | Rubber profile 8-2 mm 2M |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Landing gear axle 4x21 4 mm (2 uds) |
1 x | Spinner fold propeller 50 mm (white spare spinner) |
1 x | Spinner propeller pleg. 40 mm / 6 mm |
1 x | Rotorshape Autogyro |
1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Z Spinner (CN) 42mm |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Spinner propeller pleg. 42 mm/6,0 mm/0º |
1 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
1 x | 40 mm white plastic spinner for fixed propeller |
1 x | 45 mm white plastic spinner for fixed propeller |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | L-Connector 4.0 mm x 1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Mudguard for 140/165 mm wheels |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Katana Mini carbon wheel pants (2 pcs) |
2 x | Landing gear axle Ø 4 mm (2 uds) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Autogyro Cierva C30 Spain |
2 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/7º |
1 x | CN-Spinner propeller pleg. 36 mm / 6 mm |
1 x | White spinner propeller pleg. 42 mm / 6 mm |
1 x | Spinner propeller pleg. 38 mm / 5,0 mm |
1 x | Spinner propeller pleg. 30 mm / 3,17 mm |
1 x | Spinner propeller pleg. 40 mm / 4 mm |
1 x | Spinner propeller pleg. 40 mm / 5 mm |
1 x | Z Spinner (CN) 35mm |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | Spinner propeller pleg. 33 mm / 6,0 mm |
1 x | White spinner propeller pleg. 42 mm / 5 mm |
1 x | Spinner propeller pleg. 38 mm / 3,17 mm |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Spinner Alumin. propeller pleg. 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | Spinner NUT 1/4x28 |
1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
1 x | JETImodel SINGLE BEC |
1 x | Aluminum Fold Prop Spinner 34 mm / 3 mm |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | Spinner fixed propeller 60 mm / 5,0 mm |
1 x | MPX PCB "Gender-Changer (5 pcs) |
|
20,169.08EUR |