Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

PowerBox SparkSwitch RS unregulated
69.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	LiPo TopFuel 4600 mAh 5S 20C ECO-X Competition F3A 2017
1 x	Ferrita con funda
1 x	Ferrita 14x8x5.5 mm
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Cable BEC 30 cm (macho)
1 x	Conector Sub-D 2+5 Hembra
1 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Horn de mando carbono 20 mm
1 x	Horn de mando variable inclinado 6 mm M3
1 x	Horn de mando variable 6 mm M3
1 x	BEC 3A FOXY
1 x	Cable BEC 30 cm (hembra)
1 x	Horn con ball 40x30
2 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
2 x	Horn aluminio anodiazado 6 mm azul con rótula
2 x	Cable con accesorios
2 x	CC 01
2 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn aluminio anodiazado 6 mm rojo con rótula
2 x	Circlick seguridad
1 x	DPSI Ampere battery backer
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
2 x	Horn metálico ajustable rosca M3
1 x	APM2,6 Power module con BEC 5,3 V DC
1 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Horn de mando 5/15 con rótula M2
1 x	CC 03
1 x	Conector Sub-D 2+5 Macho
2 x	Horn de mando largo con rodamiento (2 ud)
2 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Horn de mando variable inclinado 5 mm M2
1 x	Conectores para alas del Fox MDM1
3 x	Horn mando long (2 pcs)
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	Cable carga bateria transmisor Futaba 2x0,5 qmm (50 cm)
2 x	Conector CAN 15
1 x	Cable "Y" equilibrador 5S, 2x JST-XH / 1x JST-EH
1 x	Horn de mando variable 5 mm M2
2 x	Horn DUBRO 1/2A
1 x	Horn de mando 5/20 con rótula M2
2 x	Horn extra largo 60x30
1 x	Varilla carbono plana 1000x3.0x0.5 mm
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
4 x	Varilla carbono 6.0 mmx1000 mm
3 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Varilla carbono 0.5 mmx1000 mm
1 x	Varilla carbono 4.0 mmx1000 mm
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Varilla carbono 2.5 mmx1000 mm
3 x	Varilla carbono 12 mm x 1000 mm
1 x	Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x	Rótula M3 RPA's-UAV's
1 x	Sistema cierre 250 mm con abrazadera (2 pcs)
1 x	Acoplador M3 (10 uds)
1 x	Equilibrador hélices
1 x	Plasti Dip Liquid Tape 429 ml rojo
1 x	Piloto 1/6 "Tony"
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Cartuchos de humo AX-18 blanco (5 pcs)
1 x	Bisagra cilíndrica 2,5 Ø x 10 x 43 mm (10 pcs)
1 x	Bisagra cilíndrica 4,5 Ø x 12 x 76 mm (10 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Listón triangular de BALSA 15x15x1000 mm
1 x	Listón de CAOBA 2,0x2,0x1000 mm
1 x	Cable video GoPro
1 x	Conector AWG Macho 20 pines
1 x	PowerBox SparkSwitch RS
1 x	Conector AWG Macho 6 pines
1 x	Interrruptor de encendido SPARK Switch 12v
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	MAX BEC 2D plus EX
2 x	Acople ALU M2,5 Ø 4 (2 uds)
2 x	Horn aluminio pequeño rojo (2pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Prolongador 5 lipos conector JST/C
1 x	Horn de mando corto ajustable con rodamiento
1 x	Interruptor RX/Batería
1 x	Prolongador hembra XH 30 cm 6 elementos cable silicona 0,25 mm
1 x	Conector alas/fuselaje para 12 pines AWG 20-22
1 x	DPS Interruptor JR/JR
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
1 x	Interruptor electrónico autoarranque
1 x	Interrruptor de encendido SPARK Switch 5.9v
1 x	Interruptor canal todo/nada 3 posiciones Largo FX
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x	Interruptor electronico JETI SP6 0-15v/6A
1 x	Interruptor electronico JETI SP06 Opto
1 x	Set acople ALU M2,5 Ø 4 (2 uds)
1 x	Acople ALU Izda. M2,5 Ø 4 (2 uds)
1 x	Interruptor JETI DPS40
2 x	Acople ALU M2 Ø 4 (2 uds)
2 x	Acople ALU Izda. M3 Ø 4 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Conector alas EWC6 40 cm
1 x	Horn micro type4 Ø 0,5(2 pcs)
1 x	Conector AWG Hembra 16 pines
1 x	Acople ALU M2,5 Ø 3 (2 uds)
1 x	Adaptador USB para elementos Jeti DUPLEX
1 x	Interruptor OPTO Gas Engine
1 x	SPS Remote switch actuator
1 x	Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Conector alas/fuselaje para 6 pines AWG 20-24 (sin pines)
1 x	Adaptador 2 LiPos XH>EH
1 x	NF-3 RC set
1 x	NF-1 RC set
1 x	Led Flash (rojo - 2 pcs)
1 x	Reflector 18 mm (2 pcs)
1 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	Simulador del Quemador NF-Jet2YY Set
1 x	Bateria LiFe TopFuel 3100 mAh 4s MTAG 30C
2 x	Bateria LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Cartucho de humo Amarillo 100 g
1 x	Cartuchos de humo AX-9 blanco (10 pcs)
4 x	Acorazado SCHARNHORST 1:200
2 x	La Capitania di Venetia 1:50
2 x	Simulador del Quemador NF-Jet4 RY
1 x	Led (blanco - 2 pcs)
1 x	NF-3m Heli Kit
1 x	NF-3XL Set
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Lente para luz, 20mm
1 x	Sistema de luces de alta potencia
1 x	Varilla carbono 20 mmx1000 mm
1 x	Motor A2212/13T
1 x	Varilla carbono 2.0 mmx1000 mm
1 x	PCARD sistema wireless
1 x	Cartucho de humo Blanco 65 g
2 x	Horn aluminio LH largo L31xH30 (2pcs)
1 x	Horn aluminio roscado 6 mm con rótula
1 x	Conjunto bieleta 100 mm para dirección
1 x	Cono 60 mm aluminio (Kavan)
1 x	Plancha contrachapado Abedul 600x300x1,5 mm
1 x	Ciano KAVAN Thick 20g
1 x	Portapalas metal LAMA
1 x	Ciano KAVAN Thin 20g
1 x	Cono 40 mm aluminio (Kavan)
1 x	Aceite rodamientos 25 ml
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	SIMtransmitter 6 Modo 2
1 x	Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x	Interface Jack Adapter IKARUS
1 x	Horn mando DU-BRO 1/2 (2 pcs)
1 x	Horn largo de latón M2 para cable (2 pcs)
1 x	Acople ALU M3 Ø 6 (2 uds)
1 x	Horn aluminio negro LH largo L31xH30 (2pcs)
1 x	Acople ALU M3 Ø 5 (2 uds)
1 x	Simulador del Quemador NF-Jet3 RY
1 x	Led Flash (blanco - 2 pcs)
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	Cono 55 mm aluminio (Kavan)
1 x	EasyFLY Addon
1 x	Acople ALU M3 Ø 4 (2 uds)
1 x	Horn mando small (2 pcs)
1 x	Acople ALU M2 Ø 3 (2 uds)
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Horn de control para SlowFlyer (3 pcs)
1 x	Horn aluminio RH largo (2pcs)
1 x	Acople ALU Izda. M2,5 Ø 3 (2 uds)
1 x	Cartucho de humo Verde 100 g
1 x	Horn de mando corto con rodamiento (2 pcs)
1 x	Polo Hispano Aviación
1 x	Gorra Hispano Aviación
1 x	Chaleco Hispano Aviación
3 x	Accesorios SCHARNHORST
2 x	Acorazado Tirpiz 1:200
1 x	Lipo "Airsoft" 1200 mAh 3S 11.1v 25C T-Plug
2 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Interface Realflight Simulator
1 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Varilla carbono plana 1000x3.0x0.13 mm

5,787.30EUR